Elsner 71239, EAN: 4051996712398

Elsner 71239 Weather Station GPS KNX sec

Elsner 71239 Weather Station GPS KNX sec

Lieske Part No. 2035918
Mfg Part No 71239
EAN-Code 4051996712398
Manufacturer Elsner
Here only 389,08 EUR
463,01 EUR incl. VAT

Further information for Elsner 71239 Weather Station GPS KNX sec

General
HousingPlastic
Colourwhite/translucent
MountingSurface mounted (plaster)
Degree of protectionIP44
Dimensions (W × H × D)113 mm × 101 mm × 225 mm
Weight total≈ 260 g
Ambient temperature25...+50 °C
Storage temperature30...+70 °C
GPS frequency range1559...1610 MHz
KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses2300
Maximum assignments2300
Communication objects423
Electricity consumption≤ 14 mA
ConnectionKNX plug-in terminal
Conductor diameterØ 0,6...0,8 mm
Strip length5 mm
Time until data reception after bus voltage recovery≈ 5 s
Power supply
Auxiliary voltage20...32 V DC SELV
Auxiliary current [at]≤ 60 mA [24 V DC]
Sensors
Temperature measurement range25...+50 °C
Wind measurement range [at]2…30 m/s [25 °C]
Brightness measurement range0 Lux … 150 000 Lux
The Elsner weather station Windancer 2.0 GPS KNX sec is a surface-mounted device for the KNX building bus system, designed for capturing environmental data such as temperature, wind speed, brightness, and precipitation. The plastic housing in white/translucent is designed for outdoor use and provides IP44 protection, ensuring dust and splash water resistance. Dimensions are 113 mm (width) × 101 mm (height) × 225 mm (depth), with a total weight of approximately 260 g. The operating temperature range is between 25 °C and +50 °C, and the storage temperature range is between 30 °C and +70 °C.

Applications

The weather station is primarily intended for integration into building automation systems, especially for controlling facade shading. The measured values such as brightness, wind, temperature, and precipitation can be used in the ETS application to control threshold-dependent switching outputs. The integrated shading control enables automated control of up to 8 facades, with louvers adjusted according to the sun's position (azimuth and elevation) and brightness. Additionally, shading is protected against wind, frost, and precipitation.

Functions and Equipment in Detail

The weather station features an integrated GPS receiver operating in the frequency range of 1559 to 1610 MHz. This receiver captures the current time and geographical coordinates, from which the sun's position is calculated. These data are used for astronomical sun protection control and configuration of the integrated time clocks, eliminating the need for manual location configuration. Wind measurement is performed using a stable cup anemometer, which can measure wind speeds up to 200 km/h under laboratory conditions. Values are displayed in m/s, km/h, and Beaufort. Precipitation detection is achieved via a heated sensor surface that recognizes only drops and flakes as precipitation, not fog or dew. When precipitation stops, the sensor dries quickly, automatically ending the notification. Temperature measurement covers a range of 25 °C to +50 °C, while brightness measurement spans from 0 Lux to 150,000 Lux. Brightness measurement is performed using three separate sensors, with the currently highest value being output.

Technology Explained Simply

The weather station communicates over the KNX bus system in medium TP1-256 and operates in configuration mode S-Mode. Power supply is via an auxiliary voltage of 20 to 32 V DC SELV, with a maximum current consumption of 60 mA at 24 V DC. Communication is via a KNX plug terminal designed for wire diameters of Ø 0.6 to 0.8 mm and requiring a stripping length of 5 mm. The maximum number of group addresses and assignments is 2300 each, and the number of communication objects is 423. After bus voltage is restored, it takes approximately 5 seconds before data can be received. The weather station supports KNX Data Secure with an extended peer-to-peer key table, enabling secure communication with up to 1000 KNX Data Secure participants. Parameterization is done via an intuitive menu system with context help and semantic information (Smart Linking Ready). The Live Data Adjustment function allows setting the current measured value as a threshold via a communication object.

Compatibility and Accessories

The weather station is designed for use in KNX systems and can communicate with other KNX devices via defined group addresses and communication objects. The integrated logic gates (8 AND and 8 OR gates, each with 4 inputs) allow linking of states. Inputs can be switching events as well as 16 logic inputs in the form of communication objects. The gate outputs can be configured as either 1 bit or 2 x 8 bits. The shading control supports up to 8 facades with louver tracking and shadow edge tracking. The integrated weekly time switch offers 4 different time periods per day, while the calendar time switch allows up to 2 on/off switching operations per day in 3 time periods. Switching outputs for all measured values are configurable, with thresholds set via parameters or communication objects.

Mounting and Installation

The weather station is surface-mounted. The delivery includes the weather station itself, two stainless steel countersunk head screws (WN56, 4×50 mm, cross recess), two S 6 anchors, two DIN 125 washers (V2A, A4,3, outer diameter 9 mm), one KNX plug terminal, one plug terminal (white/yellow), and an installation manual (in German, English, French, Italian, Spanish) and a handbook (available as a download, also in the mentioned languages). Mounting is done using the included screws and anchors. Electrical connection is made via the KNX plug terminal.

Operational Advantages

The weather station provides comprehensive data acquisition for building automation, particularly for facade shading. GPS-based location determination enables precise sun protection control without manual entry of geographical coordinates. The integrated logic gates and time clocks reduce system configuration complexity. Precipitation detection with a heated sensor surface prevents false alarms from fog or dew. Communication via KNX Data Secure ensures secure data transmission in the network. Intuitive parameterization and support for Smart Linking Ready simplify system commissioning and maintenance.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2035918
qrcode für Elsner 71239 Weather Station GPS KNX sec