Elsner 71238, EAN: 4051996712381

Elsner 71238 Weather Station KNX sec Cup Anemometer

Elsner 71238 Weather Station KNX sec Cup Anemometer

Lieske Part No. 2035917
Mfg Part No 71238
EAN-Code 4051996712381
Manufacturer Elsner
Here only 317,71 EUR
378,07 EUR incl. VAT

Further information for Elsner 71238 Weather Station KNX sec Cup Anemometer

Technical data
HousingPlastic
Colourwhite/translucent
MountingSurface mounted (plaster)
Degree of protectionIP44
Dimensions (W × H × D)113 mm × 101 mm × 225 mm
Weight total≈ 260 g
Ambient temperature25...+50 °C
Storage temperature30...+70 °C
MediumTP1-256
Configuration modeS-Mode
Max. secure communication partners1000
Maximum group addresses2300
Maximum assignments2300
Communication objects304
Electricity consumption≤ 14 mA
Conductor diameterØ 0,6...0,8 mm s
Strip length5 mm
Time until data reception after bus voltage recovery≈ 5 s
Auxiliary voltage20...32 V ⎓ SELV
Auxiliary current [at]≤ 60 mA [24 V DC]
Temperature measurement range25...+50 °C
Wind measurement range [at]2…30 m/s [25 °C]
Brightness measurement range0 Lux … 150 000 Lux
The Elsner weather station Windancer 2.0 KNX sec is a surface-mounted device for the KNX building bus system, designed for measuring ambient conditions in outdoor environments. It measures temperature, wind speed, brightness, and detects precipitation. The device features a plastic housing in white/translucent colour and is designed for outdoor use with protection rating IP44, ensuring protection against dust and splashing water. Dimensions are 113 mm (width) × 101 mm (height) × 225 mm (depth), with a total weight of approximately 260 g. The operating temperature ranges from 25 °C to +50 °C, and the storage temperature ranges from 30 °C to +70 °C.

Applications

The weather station is designed for integration into building automation systems, particularly for applications where environmental conditions are used to control window or roller shutter systems, lighting systems, or ventilation systems. The measured values for wind, temperature, and brightness can be transmitted via the KNX protocol to other devices, enabling automated responses to external conditions. Precipitation detection supports, for example, the automatic closing of windows or blinds during rain.

Functions and equipment in detail

Wind measurement is performed using a stable cup anemometer, capable of detecting wind speeds up to 200 km/h under laboratory conditions. Values are displayed in m/s, km/h, and Beaufort. Precipitation detection is based on a heated sensor surface that recognizes drops and flakes as precipitation, but does not detect mist or dew. This prevents false alarms in humid air. Once precipitation stops, the sensor dries quickly and the alert ends. Temperature measurement is performed in the range of 25 °C to +50 °C, and brightness measurement in the range of 0 Lux to 150,000 Lux. Three separate sensors measure brightness in the directions East, South, and West, enabling spatially differentiated control.

Technology explained simply

The weather station communicates via the KNX protocol on medium TP1-256. It supports KNX Data Secure with an extended peer-to-peer key table, allowing up to 1,000 secure communication partners to be addressed. Power supply is via an auxiliary voltage of 20 to 32 V ⎓ SELV, with the auxiliary current at 24 V DC being a maximum of 60 mA. The device’s power consumption is up to 14 mA. Configuration is performed in S-Mode, using the ETS application for parameterization. Communication objects include 304 entries, with up to 2,300 group addresses and assignments configurable. The time until data reception resumes after bus voltage recovery is approximately 5 seconds. The wire diameters for the connection terminals range from Ø 0.6 mm to Ø 0.8 mm s, and the stripping length is 5 mm.

Compatibility and accessories

The weather station is designed for use in a KNX network and can communicate with other KNX devices. Integrated logic gates allow states to be linked via AND and OR logic. There are 8 AND gates and 8 OR gates, each with 4 inputs available. Inputs can be switching events as well as 16 logic inputs in the form of communication objects. The output of each gate can be configured as either 1 bit or 2 x 8 bits. The location query for the northern or southern hemisphere ensures correct output of brightness values for East and West. Threshold settings can be adjusted via parameters or communication objects. The Live Data Adjustment function allows the current measured value to be set as the threshold.

Mounting and installation

Mounting is surface-mounted, with the weather station secured using the mounting materials included in the delivery. These include 2 stainless steel countersunk head screws (WN56, 4×50 mm, cross recess), 2 S 6 anchors, and 2 DIN 125 washers (V2A, A4, outer diameter 9 mm). The connection terminals are white/yellow and designed for wire diameters of Ø 0.6 to 0.8 mm s. The installation instructions and manual are included in the delivery and available in German, English, French, Italian, and Spanish. The manual can also be downloaded.

Advantages in operation

The weather station enables precise and reliable measurement of ambient conditions, which can be directly integrated into building automation. The combination of multiple sensors and integrated logic gates reduces the need for additional control devices. The intuitive parameterization interface with context help and semantic information simplifies configuration. Setting thresholds via communication objects allows flexible adaptation to different requirements. The heated sensor surface for precipitation detection ensures high reliability under changing weather conditions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2035917
qrcode für Elsner 71238 Weather Station KNX sec Cup Anemometer