| General |
| Housing | Real glass, plastic |
| Colours (similar) | RAL 9003 (white), RAL 9005 (black) |
| Degree of protection | IP20 |
| Dimensions (W × H) | 81,5 mm x 81,5 mm |
| Installation depth | 12,5 mm |
| Weight total | ≈ 70 g |
| Ambient temperature | 5…+45 °C |
| rH (relative humidity), non-condensing | 0...95 % |
| Storage temperature | 25...+70 °C |
| Over voltage category | III |
| Pollution degree | 2 |
| KNX bus |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 254 |
| Maximum assignments | 254 |
| Communication objects | KNX eTR 205 Light: 92, KNX eTR 206 Light: 98 |
| Nominal voltage | 30V DC SELV |
| Electricity consumption | ≤ 25 mA |
| Connection KNX plug-in terminal conductor diameter | Ø 0,8 mm s |
| Connection KNX plug-in terminal stripping length | 5 mm |
| Time until data reception after bus voltage recovery | ≈ 5 s |
| Sensor |
| Temperature measurement range | 5…+60 °C |
The Elsner KNX eTR 206 Light is a touch-sensitive switch for temperature control and lighting control in the KNX building bus system. The device features two independent control areas for lighting control, each with two touch surfaces for switching and dimming functions, where the duration of touch (short or long) is used to distinguish between functions. Additionally, an integrated temperature sensor measures room temperature in the range of 5 to +60 °C. The measured values can be combined with external temperature values to generate a mixed value, which is output via the bus. Temperature control is performed using a PI controller, which can be configured for both heating and cooling, with control based on separate setpoints or a base setpoint. The setpoint temperature is adjusted via the touch buttons "+" and "-".
Functions and equipment in detail
The switch offers flexible configuration of the touch surfaces: when two or more buttons are touched, the function can be set as a switch, toggle switch, 8- or 16-bit value transmitter, or for scene calls. The integrated LEDs are configurable – they can be completely turned off, used as ambient lighting, or controlled individually. The communication objects of the KNX eTR 206 Light amount to 98, enabling extensive integration into existing KNX systems. The maximum number of group addresses and assignments is 254 each, supporting use in complex installations. Configuration is performed via the KNX software ETS 5.
Technology explained simply
The device operates in S-Mode as configuration mode and uses the TP1-256 bus medium. The nominal voltage is 30 V DC SELV, with a current consumption of up to 25 mA. The connection terminal for the KNX bus is designed for conductors with a diameter of Ø 0.8 mm, requiring a stripping length of 5 mm. After the bus voltage is restored, it takes approximately 5 seconds before data can be received. The operating environment is specified for ambient temperatures from 5 to +45 °C and relative humidity from 0 to 95 % (non-condensing). Storage conditions range from 25 to +70 °C. The protection rating IP20 protects against contact with fingers and solid foreign objects, but not against splashing water or dust. Overvoltage category III and pollution degree 2 meet the requirements for indoor installations in residential and office buildings.
Compatibility and accessories
The switch is designed for use in KNX systems and can communicate with other KNX devices via the bus. The integrated logic gates (2 AND and 2 OR gates, each with 4 inputs) enable linking of communication objects. Up to 8 logic inputs can be used, and each gate output can be configured as either 1 bit or 2 x 8 bits. The device is available in the colors RAL 9003 (white) and RAL 9005 (black), with the surface made of real glass and plastic. Dimensions are 81.5 mm (width) × 81.5 mm (height), mounting depth is 12.5 mm, and total weight is approximately 70 g.
Mounting and installation
Installation is performed on a standard installation rail or into a suitable wall socket. The device is secured using the included holder, 4 wall plugs (4 × 20 mm), and 4 countersunk screws (3 × 25 mm). Electrical connection is made via the KNX terminal. The installation manual and handbook are included in the delivery and are available in multiple languages (German, English, French, Italian, Spanish). Additionally, a product file is available for download.
Advantages in operation
The KNX eTR 206 Light offers intuitive operation through touch-sensitive surfaces and integrated LED lighting, providing clear visualization of functions. The combination of temperature sensor and PI controller enables precise room temperature control. The flexible logic function allows complex control sequences that can be adapted to individual requirements. Using ETS 5 for configuration ensures standardized and secure setting of device parameters. The robust construction from real glass and plastic, along with compliance with indoor installation standards (IP20, overvoltage category III, pollution degree 2), ensures reliable and long-lasting use in building automation.
Housing
The housing consists of real glass and plastic, available in the colors RAL 9003 (white) and RAL 9005 (black). Dimensions are 81.5 mm (width) × 81.5 mm (height), with a mounting depth of 12.5 mm. Total weight is approximately 70 g. The protection rating IP20 protects against contact with fingers and solid foreign objects, but is not suitable for outdoor use or in damp rooms. The operating environment is specified for ambient temperatures from 5 to +45 °C and relative humidity from 0 to 95 % (non-condensing). Storage conditions range from 25 to +70 °C. Overvoltage category III and pollution degree 2 meet the requirements for indoor installations in residential and office buildings.
Accessories and delivery contents
The delivery includes the switch with holder, 4 wall plugs (4 × 20 mm), 4 countersunk screws (3 × 25 mm), a data sheet with installation instructions (in German, English, French, Italian, Spanish), and a handbook (in German, English, French, Italian, Spanish) available for download. A product file is also available for download. Installation is performed on a standard installation rail or into a suitable wall socket. Electrical connection is made via the KNX terminal. The installation manual and handbook are available in multiple languages.
Applications
The switch is suitable for integration into KNX-based building automation systems in residential and office buildings. It is used for temperature control and lighting control, with functions operated via touch-sensitive surfaces. The integrated logic function enables complex control sequences that can be adapted to individual requirements. Using ETS 5 for configuration ensures standardized and secure setting of device parameters. The robust construction from real glass and plastic, along with compliance with indoor installation standards (IP20, overvoltage category III, pollution degree 2), ensures reliable and long-lasting use in building automation.