| General |
| Housing | Real glass, plastic |
| Colours (similar) | RAL 9003 (white), RAL 9005 (black) |
| Degree of protection | IP20 |
| Dimensions (W × H) | 81,5 mm x 81,5 mm |
| Installation depth | 12,5 mm |
| Weight total | ≈ 70 g |
| Ambient temperature | 5…+45 °C |
| rH (relative humidity), non-condensing | 0...95 % |
| Storage temperature | 25...+70 °C |
| Over voltage category | III |
| Pollution degree | 2 |
| KNX bus |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 254 |
| Maximum assignments | 254 |
| Communication objects | KNX eTR 205 Light: 92, KNX eTR 206 Light: 98 |
| Nominal voltage | 30V DC SELV |
| Electricity consumption | ≤ 25 mA |
| Connection KNX plug-in terminal conductor diameter | Ø 0,8 mm s |
| Connection KNX plug-in terminal stripping length | 5 mm |
| Time until data reception after bus voltage recovery | ≈ 5 s |
| Sensor |
| Temperature measurement range | 5…+60 °C |
The Elsner KNX eTR 206 Light is a touch-sensitive switch for temperature control and lighting control in the KNX building bus system. It features two control areas for lighting control, each with two function keys for switching and dimming, where the duration of touch (short or long) triggers different functions. Additionally, an integrated temperature sensor measures room temperature and can be combined with external temperature values via the KNX bus to calculate a mixed value. The target temperature is adjusted using the touch keys "+" and "-". The device supports a PI controller for heating and cooling, where control can be single- or two-stage depending on configuration. Communication takes place via the TP1-256 medium in S-Mode, supporting up to 254 group addresses and assignments. The nominal voltage is 30 V DC SELV, with a maximum current consumption of 25 mA. The connection terminal for the KNX bus is designed for conductors with a diameter of Ø 0.8 mm s, with a stripping length of 5 mm. After bus voltage is restored, it takes approximately 5 seconds before data can be received.
Applications
This switch is intended for integration into KNX heating and lighting systems in residential and office buildings. It is particularly suitable for rooms where intelligent, user-friendly control of room temperature and lighting is desired. The integrated temperature measurement enables precise control of heating and cooling performance, with the mixed value from internal and external temperature values being adjustable in percentage. Lighting control via two independent areas offers flexibility in controlling different light sources or lighting scenarios.
Functions and Equipment in Detail
The surface consists of real glass and plastic, with touch-sensitive switch areas. The integrated LEDs can be configured: all LEDs can be turned off, operated as ambient lighting, or controlled individually. The surface function for simultaneous touch of multiple keys is configurable – as a switch, toggle switch, 8- or 16-bit value transmitter, or for scene calls. Temperature measurement is performed in the range of 5 to +60 °C. Output of minimum and maximum values is possible. Configuration is done via the KNX software ETS 5.
Technology Explained Simply
The switch operates with an integrated temperature sensor that detects ambient temperature. These data are transmitted via the KNX bus and can be mixed with external temperature values, with the proportion being adjustable in percentage. The PI controller ensures stable control of heating and cooling performance, where control can be based on separate setpoints or a base setpoint. The logic functions include two AND and two OR gates, each with four inputs. Eight logic inputs can be used in the form of communication objects. The output of each gate can be configured as either 1 bit or 2 x 8 bits. Power supply is via the KNX bus network (PoE, Power over Ethernet), with a nominal voltage of 30 V DC SELV.
Compatibility and Accessories
The device is designed for use in KNX systems and requires configuration using the software ETS 5. It is compatible with other KNX devices communicating via the TP1-256 medium. The maximum number of communication objects is 98 (for the eTR 206 Light). Devices in the KNX eTR 205/206 Light product series are compatible with each other, with the eTR 206 Light offering two lighting control areas, unlike the eTR 205 Light which has one area.
Mounting and Installation
The switch is installed in a standard 81.5 mm installation box (W x H: 81.5 mm x 81.5 mm). The mounting depth is 12.5 mm. Mounting is done using the included 4 wall plugs (4 x 20 mm) and 4 countersunk screws (3 x 25 mm). Installation follows the instructions in the supplied datasheet with installation guide, available in German, English, French, Italian, and Spanish. Electrical connection is made via the KNX terminal with a conductor diameter of Ø 0.8 mm s and a stripping length of 5 mm.
Advantages in Operation
The switch offers intuitive, touch-sensitive operation with clear visual feedback via the integrated LEDs. The combination of temperature control and lighting control in a single device reduces the number of required installation components. The ability to create mixed values from internal and external temperature values increases the accuracy of room temperature control. The logic functions enable flexible control strategies that can be adapted to individual requirements. The operating temperature range is between 5 and +45 °C, and the relative humidity (non-condensing) can reach up to 95 %. The protection rating IP20 safeguards against finger contact and ingress of solid foreign objects larger than 12.5 mm.