| KNX bus |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 183 |
| Maximum assignments | 183 |
| Communication objects | 44 / 55 / 73 |
| Nominal voltage | 30V SELV |
| Electricity consumption | ≤ 10mA |
| Connection KNX plug-in terminal conductor diameter | Ø 0,8mm s |
| Connection KNX plug-in terminal stripping length | 5mm |
| Connection spring clamp wire diameter | Ø 0,8mm s |
| Connection spring clamp stripping length | 7...9mm |
| Time until data reception after bus voltage recovery | ≈ 5 s |
| Sensor |
| Temperature measurement range | 5…+60°C |
| Technical data |
| Housing | Real glass, plastic |
| Colours (similar) | RAL 9003 (white), RAL 9005 (black) |
| Degree of protection | IP20 |
| Dimensions (W × H) | 81,5 mm × 81,5 mm |
| Installation depth | 12,5 mm |
| Weight total | ≈ 70 g |
| Ambient temperature | 5…+45°C |
| rF (relative humidity) non-condensing | 0...95% |
| Storage temperature | 25...+70°C |
| Over voltage category | III |
| Pollution degree | 2 |
The Elsner KNX eTR M2 is a double push-button with integrated temperature sensor, designed for integration into KNX building bus systems. The device features touch-sensitive switching surfaces, implemented as touch areas, used to control various functions in the building automation system. Each of the two touch surfaces is equipped with a white LED, whose operating behavior can be configured via the KNX software ETS 5. The buttons can be used as switches, toggle switches, dimmers, value transmitters, or for scene calls. Simultaneous touching of both buttons activates an additional surface function, which can also be configured as a switch, toggle switch, value transmitter, or scene function.
Applications
This push-button is intended for installation in indoor environments where intelligent control of lighting, devices, blinds, roller shutters, awnings, or windows is required. The integrated temperature measurement function enables ambient temperature detection in the range of 5 to +60°C. These measured values can be combined with external temperature values via the KNX bus to generate a mixed value, with the percentage contribution being adjustable. This is particularly useful in heating and air conditioning control systems, where precise temperature detection is required for regulation.
Functions and Equipment in Detail
The device features two touch-sensitive touch surfaces, which can be individually configured via the KNX software ETS 5. The functions include switching, toggling, dimming, controlling drives, and transmitting 8- or 16-bit values. Additionally, scenes can be called or stored. The integrated LEDs can be configured in various operating modes: e.g., on when object value = 1, off when object value = 0, on after button press for a configurable time, or constantly off. When the lock object value = 1, the LED can optionally blink. Configuration is performed via the ETS 5 software, which enables assignment of group addresses and setting of logic functions.
Technology Explained Simply
The push-button operates in S-Mode configuration mode and is designed for the TP1-256 bus medium standard. The nominal voltage is 30 V SELV, with a current consumption of up to 10 mA. Communication occurs via the KNX bus, supporting up to 183 group addresses and assignments. The device features 44, 55, or 73 communication objects, depending on configuration. Connections are made via spring clamp terminals and push-in terminals, with a conductor diameter of 0.8 mm. The stripping length is 5 mm for the push-in terminal and 7 to 9 mm for the spring clamp terminals. After bus voltage recovery, it takes approximately 5 seconds for the device to resume data reception.
Compatibility and Accessories
The push-button is designed for use in the KNX standard and can communicate with other KNX devices. The integrated logic functions include two AND and two OR gates, each with four inputs. Eight logic inputs in the form of communication objects can be used. The output of each gate can be configured as either 1 bit or 2 x 8 bits. The device is available in signal white RAL 9003, with the variant RAL 9005 (black) also offered. The housing consists of real glass and plastic.
Mounting and Installation
Mounting is performed in a standard installation box. The mounting depth is 12.5 mm, and the device dimensions are 81.5 mm (width) × 81.5 mm (height). The total weight is approximately 70 g. Installation is carried out using the included 4 wall plugs (4 × 20 mm) and 4 countersunk screws (3 × 25 mm). Connections are made via spring clamp terminals and push-in terminals. The installation manual and handbook are available for download and are provided in multiple languages.
Advantages in Operation
The push-button enables intuitive operation through touch-sensitive surfaces and integrated LEDs, which visually indicate the status. Temperature measurement and the ability to combine external values increase the accuracy of room climate control. The logic functions allow complex control sequences, which can be individually programmed via the ETS 5 software. The device is designed for ambient temperatures of 5 to +45°C and relative humidity of 0 to 95 % (non-condensing). Storage is permitted at temperatures of 25 to +70°C. The protection rating IP20 safeguards against finger contact and ingress of solid foreign objects larger than 12.5 mm. The overvoltage category III and pollution degree 2 meet requirements for indoor use.
The device is designed for indoor use and meets KNX technology requirements. Configuration is performed via the ETS 5 software, enabling assignment of group addresses, setting of logic functions, and adjustment of LED behavior. The integrated temperature measurement and logic functions extend the functionality of the push-button beyond simple switching.