Elsner 71113, EAN: 4051996711131

Elsner 71113 single push-button with temperature sensor signal white

Elsner 71113 single push-button with temperature sensor signal white

Lieske Part No. 2097950
Mfg Part No 71113
EAN-Code 4051996711131
Manufacturer Elsner
Here only 115,90 EUR
137,92 EUR incl. VAT

Further information for Elsner 71113 single push-button with temperature sensor signal white

KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses183
Maximum assignments183
Communication objects44 / 55 / 73
Nominal voltage30V SELV
Electricity consumption≤ 10mA
Connection KNX plug-in terminal conductor diameterØ 0,8mm s
Connection KNX plug-in terminal stripping length5mm
Connection spring clamp wire diameterØ 0,8mm s
Connection spring clamp stripping length7...9mm
Time until data reception after bus voltage recovery≈ 5 s
Sensor
Temperature measurement range5…+60°C
Technical data
HousingReal glass, plastic
Colours (similar)RAL 9003 (white), RAL 9005 (black)
Degree of protectionIP20
Dimensions (W × H)81,5 mm × 81,5 mm
Installation depth12,5 mm
Weight total≈ 70 g
Ambient temperature5…+45°C
rF (relative humidity) non-condensing0...95%
Storage temperature25...+70°C
Over voltage categoryIII
Pollution degree2
The Elsner KNX eTR M1 is a single-button switch with an integrated temperature sensor, designed for integration into KNX building bus systems. The device features a touch-sensitive switch surface made of real glass, serving as a touch surface and enabling control of various functions within the building automation system. The surface is finished in signal white (RAL 9003), with a black variant (RAL 9005) also available. The housing is made of plastic and real glass, intended for indoor use, with protection rating IP20 ensuring protection against contact and foreign objects. Dimensions are 81.5 mm × 81.5 mm, mounting depth is 12.5 mm, and total weight is approximately 70 g. The operating environment requires a temperature range of 5 to +45°C and relative humidity of 0 to 95 %, provided no condensation occurs. Storage temperature ranges from 25 to +70°C.

Applications

The switch is intended for integration into intelligent building automation systems, particularly in residential and office buildings, where central control of lighting, blinds, roller shutters, awnings, windows, and scene control is required. The integrated temperature measurement enables use as a sensor for room temperature monitoring and control. Functions can be configured via the KNX software ETS 5, allowing flexible adaptation to individual requirements.

Functions and Equipment in Detail

The switch can be configured as a switch, toggle switch, dimmer, value transmitter (8- or 16-bit), or for scene recall/storage. Each touch surface integrates a white LED, whose behavior (on/off, flashing at locked object value) is controlled via configuration. For example, the LED can be turned on at an object value of 1 and off at 0, or illuminated for a user-defined duration after button press. Temperature measurement is performed in the range of 5 to +60°C. The device can receive an external temperature value via the bus and combine it with its own measured value to create a mixed value, with the percentage contribution being adjustable.

Technology Explained Simply

The switch operates in the KNX-TP1-256 bus medium and supports the S-Mode configuration mode. The nominal voltage is 30 V SELV, with current consumption limited to a maximum of 10 mA. Communication objects are available in three variants: 44, 55, or 73, depending on the model. The maximum number of group addresses and assignments is 183 each. Connections are made via spring-cage terminals and push-in terminals, with a conductor diameter of 0.8 mm. The stripping length is 5 mm for the push-in terminal and 7 to 9 mm for the spring-cage terminals. After bus voltage recovery, it takes approximately 5 seconds before data can be received. Overvoltage category III and pollution degree 2 ensure safe and reliable operation in typical indoor installations.

Compatibility and Accessories

The switch is part of the KNX eTR M product series and can be combined with other models in the series (e.g., M2, M4). Configuration is performed via the KNX software ETS 5. Integrated logic functions include 2 AND and 2 OR gates, each with 4 inputs, where the inputs consist of 8 logic inputs in the form of communication objects. The output of each gate can be configured as either 1 bit or 2 x 8 bits. The device is designed for use in KNX networks and requires no additional power supply, as power is supplied via the bus.

Mounting and Installation

Mounting is performed on a standard installation rail or in a suitable wall box. The device is secured using the included mounting bracket. The delivery includes the switch with mounting bracket, 4 wall plugs (4 × 20 mm), 4 countersunk screws (3 × 25 mm), a KNX terminal, and a datasheet with installation instructions in multiple languages (German, English, French, Italian, Spanish). Additionally, a manual and a product file are available for download. Installation must follow the technical specifications and guidelines of the KNX standardization.

Advantages in Operation

The switch offers intuitive operation through its touch-sensitive surface and integrated LED indicator. Flexible configuration allows adaptation to various applications, from simple switching functions to complex scene controls. Temperature measurement and the ability to mix external values extend functionality for heating and air conditioning control. Low power consumption and SELV voltage ensure safe and energy-efficient operation. The use of spring-cage and push-in terminals simplifies installation and maintenance.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2097950
qrcode für Elsner 71113 single push-button with temperature sensor signal white