Elsner 71110, EAN: 4051996711100

Elsner 71110 single pushbutton with temperature sensor signal white

Elsner 71110 single pushbutton with temperature sensor signal white

Lieske Part No. 1147863
Mfg Part No 71110
EAN-Code 4051996711100
Manufacturer Elsner
Here only 90,09 EUR
107,21 EUR incl. VAT

Further information for Elsner 71110 single pushbutton with temperature sensor signal white

KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses183
Maximum assignments183
Communication objects44 / 55 / 73
Nominal voltage30V SELV
Electricity consumption≤ 10mA
Connection KNX plug-in terminal conductor diameterØ 0,8mm s
Connection KNX plug-in terminal stripping length5mm
Connection spring clamp wire diameterØ 0,8mm s
Connection spring clamp stripping length7...9mm
Time until data reception after bus voltage recovery≈ 5 s
Sensor
Temperature measurement range5…+60°C
Technical data
HousingReal glass, plastic
Colours (similar)RAL 9003 (white), RAL 9005 (black)
Degree of protectionIP20
Dimensions (W × H)81,5 mm × 81,5 mm
Installation depth12,5 mm
Weight total≈ 70 g
Ambient temperature5…+45°C
rF (relative humidity) non-condensing0...95%
Storage temperature25...+70°C
Over voltage categoryIII
Pollution degree2
The Elsner KNX eTR M1 signal white RAL 9003 is a single-button switch with an integrated temperature sensor, specifically designed for integration into KNX building automation systems. The device features a touch-sensitive switch surface made of real glass, serving as a touch surface to control various functions within the KNX network. The surface is finished in signal white (RAL 9003), with the variant RAL 9005 (black) also available. The housing is made of real glass and plastic, designed for indoor use, with a protection rating of IP20, protecting against finger contact and ingress of solid foreign objects larger than 12.5 mm. Dimensions are 81.5 mm × 81.5 mm (width × height), the mounting depth is 12.5 mm, and the total weight is approximately 70 g. The device is designed for an ambient temperature of 5 to +45 °C and a relative humidity of 0 to 95 % (non-condensing). Storage temperature ranges from 25 to +70 °C. The overvoltage category III and pollution degree 2 meet requirements for installations in indoor environments with normal pollution.

Applications

The switch is intended for controlling lighting, devices, blinds, roller shutters, awnings, and windows within the KNX system. It can be configured as a switch, toggle switch, dimmer, or value transmitter (8- or 16-bit). The integrated LED in each touch surface can be used for status indication, with behavior (on/off, flashing for locked object) set via the KNX software ETS 5. The functions are suitable for controlling drives and for scene calling or scene storage. The device is suitable for installation in residential and office buildings, as well as other indoor environments where intelligent building automation is required.

Functions and Equipment in Detail

The KNX eTR M1 features an integrated temperature sensor measuring values from 5 to +60 °C. The measured temperature can be combined with external values to create a mixed value, with the percentage contribution adjustable. This enables precise temperature control in building automation. The device supports up to 183 group addresses and assignments, allowing flexible integration into existing KNX systems. Communication objects are available in three variants: 44, 55, or 73, depending on configuration. Configuration is performed via the KNX software ETS 5, enabling setup of functions, logic gates, and LED behavior.

Technology Explained Simply

The switch operates in S-Mode, a configuration mode for KNX devices that enables simple and secure parameterization. Communication occurs via the TP1-256 medium, used for data transmission on the KNX bus. The nominal voltage is 30 V SELV (safe extra-low voltage), ensuring safe power supply. Power consumption is limited to ≤ 10 mA, indicating low energy consumption. Connections are made via spring-loaded terminals and push-in terminals, with a conductor diameter of 0.8 mm. The stripping length is 5 mm for the push-in terminal and 7 to 9 mm for the spring-loaded terminals. After a bus voltage recovery, it takes approximately 5 seconds for the device to resume data reception.

Compatibility and Accessories

The device is designed for use in KNX systems and can be combined with other KNX devices, such as actuators, sensors, and control units. Configuration is performed via the ETS 5 software, which is required for parameterizing all functions. The integrated logic gates (2 AND and 2 OR gates, each with 4 inputs) enable complex control logic, with inputs consisting of 8 logic inputs in the form of communication objects. Each gate output can be configured as 1 bit or 2 x 8 bits. The device is part of the KNX eTR M product series and can be combined with other models in this series (e.g., M2, M4) to integrate multiple buttons into a single device.

Mounting and Installation

Mounting is performed in a standard installation box. The device is secured using the included holder and designated mounting elements (4 plugs 4 × 20 mm, 4 countersunk screws 3 × 25 mm). Electrical connections are made via spring-loaded terminals and push-in terminals, designed for conductors with a diameter of 0.8 mm. The terminal connections are designed for a stripping length of 5 mm (push-in terminal) or 7 to 9 mm (spring-loaded terminal). Installation follows the instructions in the included installation manual.

Operational Advantages

The switch offers intuitive operation through its touch-sensitive surface and integrated LED status indicator. The ability to measure temperature values and combine them with external values enables precise room temperature control. Support for logic gates allows complex control sequences beyond simple switching functions. Low power consumption and safe nominal voltage (SELV) ensure energy-efficient and safe operation. Configuration via ETS 5 allows flexible adaptation to individual requirements in the KNX system. The robust construction from real glass and plastic, along with compliance with IP20, overvoltage category III, and pollution degree 2, ensures reliable performance in indoor environments.

Scope of Delivery

The device is delivered with a holder, 4 plugs (4 × 20 mm), 4 countersunk screws (3 × 25 mm), a KNX terminal, and a datasheet with installation instructions (in German, English, French, Italian, Spanish). Additionally, a manual is available for download, as well as the product file in the specified languages.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1147863
qrcode für Elsner 71110 single pushbutton with temperature sensor signal white