Elsner 71050, EAN: 4051996710509

Elsner 71050 room controller push button 2x suns white

Elsner 71050 room controller push button 2x suns white

Lieske Part No. 705322
Mfg Part No 71050
EAN-Code 4051996710509
Manufacturer Elsner
Here only 201,10 EUR
239,31 EUR incl. VAT

Further information for Elsner 71050 room controller push button 2x suns white

General
Housingreal glass, plastic, metal
Housing colour (similar)RAL 9010 (white), RAL 9005 (black)
Protection rating; conductor diameterIP20
Dimensions (W × H × D)55mm × 55mm × 35mm
Mounting ring (W × H)71 mm × 71 mm
Installation depth≈ 7mm
Weight total≈ 50g
Ambient temperature5…+45°C
Ambient air humidity (rH) (non-condensing)0...95%
Storage temperature25...+70°C
Over voltage categoryIII
Pollution degree2
KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses167
Maximum assignments167
Communication objectsCala KNX T 201: 92, Cala KNX T 202: 98
Nominal voltage30V DC SELV
Electricity consumption≤ 20 mA
Connection KNX plug-in terminalsConductor diameter: 0.6…0.8mm s, stripping length: 5mm
Time delay after bus voltage recovery until data reception≈ 5s
Sensors
Temperature measurement range5…+60°C
The Elsner Cala KNX T 202 Sunblind is a room temperature controller with an integrated push-button for controlling two sun protection systems, such as blinds, roller shutters or awnings. The device belongs to the Cala KNX T 201/202 Sunblind product series and is used as a KNX heating controller with temperature sensor. It features a glass surface with touch buttons for adjusting the set temperature and integrated LEDs, whose behaviour is configurable. The devices are designed for flush installation in standard 55 mm distribution boxes and seamlessly integrate into existing switch programmes by using a suitable frame.

Applications

The controller is intended for decentralised room temperature control in buildings with KNX bus systems. It is suitable for residential and office applications where intelligent control of heating, cooling and sun protection is required. The integrated temperature sensor allows measurement of room temperature in the range of 5 to +60 °C. The sun protection function enables control of two independent systems, for example a roller shutter and a blind, where the button functions can be pressed briefly or held longer to trigger different commands.

Functions and equipment in detail

The device features a PI controller for heating and cooling, which can operate in single- or two-stage mode. The set temperature is adjusted via the touch buttons "+" and "–". Temperature measurement is performed by the integrated sensor, and external temperature values can also be received via the KNX bus and combined into a mixed value. The proportions of internal and external values are configurable. The devices support up to 167 group addresses and assignments, with the Cala KNX T 202 featuring 98 communication objects. The user interface includes two areas for sun protection control, configurable as up and down functions.

Technology explained simply

The controller operates in S-Mode configuration mode and is designed for use in the TP1-256 bus medium. The nominal voltage is 30 V DC SELV, with a maximum current consumption of 20 mA. The connection terminals are designed for conductor diameters of 0.6 to 0.8 mm, with a stripping length of 5 mm. After the bus voltage is restored, it takes approximately 5 seconds for the device to receive data. The devices are designed for an ambient temperature of 5 to +45 °C and a humidity of 0 to 95 % (non-condensing). The IP20 protection rating protects against finger contact and solid foreign objects, but not against water. The overvoltage category III and pollution degree 2 meet the requirements for indoor installations.

Compatibility and accessories

The Cala KNX T 202 Sunblind is designed for integration into KNX systems and is configured using ETS 5 software. The devices are available in the colours RAL 9010 (white) and RAL 9005 (black). The delivery includes the device in housing, a mounting ring, a KNX terminal block, and a data sheet with installation instructions in multiple languages. Additionally, a manual is available for download. For installation, a suitable, windproof device box and a matching frame are required, which should match the existing switch programme.

Installation and mounting

Mounting is done in a standard 55 mm distribution box. The mounting depth is approximately 7 mm, and the overall dimensions of the device are 55 mm (W) × 55 mm (H) × 35 mm (D). The mounting ring has dimensions of 71 mm × 71 mm. Installation requires the use of a suitable frame that integrates the device visually into the existing interior design. Electrical connection is made via the KNX terminals, designed for the specified conductor diameters.

Advantages in operation

The controller enables precise room temperature control with integrated sun protection control. The touch buttons and configurable LEDs offer an intuitive user interface. The ability to integrate external temperature values increases the accuracy of control. The logic functions with AND and OR gates allow complex control sequences beyond standard functions. The devices are designed for long service life and visually integrate into existing switch rows, ensuring uniform equipment.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/705322
qrcode für Elsner 71050 room controller push button 2x suns white