| General |
| Housing | real glass, plastic, metal |
| Housing colour (similar) | RAL 9010 (white), RAL 9005 (black) |
| Protection rating; conductor diameter | IP20 |
| Dimensions (W × H × D) | 55mm × 55mm × 35mm |
| Mounting ring (W × H) | 71 mm × 71 mm |
| Installation depth | ≈ 7mm |
| Weight total | ≈ 50g |
| Ambient temperature | 5…+45°C |
| Ambient air humidity (rH) (non-condensing) | 0...95% |
| Storage temperature | 25...+70°C |
| Over voltage category | III |
| Pollution degree | 2 |
| KNX bus |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 167 |
| Maximum assignments | 167 |
| Communication objects | Cala KNX T 201: 92, Cala KNX T 202: 98 |
| Nominal voltage | 30V DC SELV |
| Electricity consumption | ≤ 20 mA |
| Connection KNX plug-in terminals | Conductor diameter: 0.6…0.8mm s, stripping length: 5mm |
| Time delay after bus voltage recovery until data reception | ≈ 5s |
| Sensors |
| Temperature measurement range | 5…+60°C |
The Elsner Cala KNX T 201 Sunblind is a room temperature controller and switch for sun protection, used in KNX heating and building automation systems. The device combines the functions of a heating controller with a touch switch for controlling blinds, roller shutters or awnings. It is available in white RAL 9010 finish and features a glass surface with integrated touch-sensitive switch areas. The surface is printed with areas for temperature control and sun protection operation, with white LEDs integrated into these areas, whose behavior is configurable.
Room temperature controller and switch for sun protection
This device serves as a central control unit for room temperature regulation and operation of sun protection systems. It allows setting the desired temperature via touch buttons “+” and “–” and includes an integrated temperature sensor measuring values from 5 to +60 °C. The measured temperature can be combined with external temperature values to form a mixed value, with the percentage contribution being adjustable. Output of minimum and maximum values is also possible. For heating and cooling control, a PI controller is integrated, which can operate in single- or two-stage mode and regulate according to separate setpoints or a base setpoint.
Functions and equipment in detail
The Cala KNX T 201 Sunblind provides a control area for temperature regulation with two areas (warmer, cooler) and an additional control area for sun protection functions with two areas (up/down). The surface function for simultaneous touch of multiple buttons is configurable as a switch, toggle switch, 8- or 16-bit value transmitter, or for scene calls. The integrated LEDs can be individually customized: all LEDs can be turned off, used as ambient lighting, or controlled individually. Configuration is done via the KNX software ETS 5.
Technology explained simply
The device operates in the KNX bus system via the medium TP1-256 and supports the configuration mode S-Mode. It can manage up to 167 group addresses and assignments. Communication objects are limited to 92 for model T 201 and 98 for model T 202. The nominal voltage is 30 V DC SELV, with a maximum current consumption of 20 mA. The connection terminals for the KNX bus are designed for conductor diameters of 0.6 to 0.8 mm, with a stripping length of 5 mm. After bus voltage recovery, it takes approximately 5 seconds before data can be received.
Compatibility and accessories
The switch is designed for use in KNX systems and requires a suitable, weatherproof device box and a frame in the format 55 x 55 mm, matching the switch program used in the building. The device is intended for indoor use, with an ambient temperature of 5 to +45 °C and relative humidity of 0 to 95 % (non-condensing). Storage temperature ranges from 25 to +70 °C. The protection rating is IP20.
Mounting and installation
Mounting is done into a suitable device box, taking into account the mounting ring (71 mm × 71 mm) and the mounting depth of approximately 7 mm. The device is supplemented with a frame matching the existing switch design. Installation requires the use of KNX plug-in terminals, which are included in the delivery. Electrical connection is made via the KNX bus medium TP1-256.
Advantages in operation
The Cala KNX T 201 Sunblind enables integrated control of room temperature and sun protection, increasing energy efficiency and comfort in buildings. The touch-sensitive buttons and integrated LEDs provide intuitive operation. The ability to combine external temperature values increases control accuracy. Logic functions with AND and OR gates allow flexible linking of communication objects, enabling complex automation scenarios. Configuration via ETS 5 ensures professional and standardized integration into existing KNX systems.
The device is made of real glass, plastic and metal, has dimensions of 55 mm × 55 mm × 35 mm and weighs approximately 50 g. It is designed for overvoltage category III and pollution degree 2.
Batteries are not included in the delivery scope.