Elsner 70973, EAN: 4051996709732

Elsner 70973 room controller deep black RAL 9005

Elsner 70973 room controller deep black RAL 9005

Lieske Part No. 1147862
Mfg Part No 70973
EAN-Code 4051996709732
Manufacturer Elsner
Here only 336,88 EUR
400,89 EUR incl. VAT

Further information for Elsner 70973 room controller deep black RAL 9005

General
HousingReal glass, plastic
Colours (similar)RAL 9010 (white), RAL 9005 (black)
Degree of protectionIP20
Dimensions (W × H × D)55 mm × 55 mm × 35 mm
Mounting ring (W × H)71 mm × 71 mm
Installation depth7 mm
Weight total≈ 70 g
Ambient temperature0…+45°C
Ambient air humidity (rH) (non-condensing)10...95 %
Storage temperature10...+60°C
Over voltage categoryIII
Pollution degree2
KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses254
Maximum assignments254
Communication objects224
Nominal voltage30V DC SELV
Electricity consumption≤ 20 mA
Connection KNX plug-in terminal conductor diameter0.6…0.8 mm s
Connection KNX plug-in terminal stripping length5 mm
Time until data reception after bus voltage recovery≈ 6 s
Sensors
Mixed gas measurement range400...2000 ppm
Temperature measurement range5…+60°C
Humidity measurement range0...100 %
The Elsner KNX VOC/TH-UP Touch, type 70973, is a room controller for intelligent building automation. The device combines the measurement of mixed gas (volatile organic compounds), temperature, and humidity in a compact housing made of real glass and plastic. It is designed for flush installation in indoor environments and serves for monitoring indoor air quality as well as controlling heating and ventilation systems via the KNX bus system. The surface is finished in deep black RAL 9005, with the colour RAL 9010 (white) also available. The device features an integrated display and two touch buttons, which can be used to display measurement values, for manual temperature control, or as programmable bus buttons.

Applications

The KNX VOC/TH-UP Touch is suitable for use in residential and office buildings where continuous monitoring of indoor air quality and automated climate control are required. It is particularly suitable for rooms with high visitor traffic or in areas where air quality may be impaired by chemical emissions. The device can be integrated into existing KNX installations and supports the calculation of mixed values from its own and external sensor data to obtain an accurate picture of room conditions.

Functions and equipment in detail

The device measures volatile organic compounds (VOC) in the air stream and calculates an air quality value in CO2 equivalents. Additionally, room temperature in the range of 5 to +60°C and relative humidity from 0 to 100 % are measured. From these values, the dew point is calculated. The integrated PI controllers enable control of heating/cooling based on temperature and ventilation based on humidity and mixed gas concentration. The controllers can be configured for single- or two-stage systems. The limit values for temperature, humidity, and mixed gas are adjustable and can be processed using logic gates (AND and OR connections). Furthermore, the device features two setpoint comparators that can calculate minimum, maximum, or average values from communication objects.

Technology explained simply

The KNX VOC/TH-UP Touch operates in S-Mode and uses the TP1-256 bus medium. The nominal voltage is 30 V DC SELV, with a maximum current consumption of 20 mA. Communication takes place via a KNX plug-in terminal, designed for conductor diameters of 0.6 to 0.8 mm and requiring a stripping length of 5 mm. The device has 224 communication objects, up to 254 group addresses and assignments. After a bus voltage recovery, it takes approximately 6 seconds before data can be received. The ambient temperature is 0 to +45°C, and humidity is 10 to 95 % rH (non-condensing). The device is designed for indoor use with protection rating IP20. The mounting depth is 7 mm, overall dimensions are 55 mm × 55 mm × 35 mm, and the total weight is approximately 70 g.

Compatibility and accessories

The device is designed for use in KNX systems and requires configuration via ETS 5 software. It is supplied with a mounting ring intended for installation in a suitable device box according to DIN EN IEC 60670-1 / DIN 49073. The device can receive external values for temperature, humidity, and mixed gas concentration via the bus and combine them with its own measurements to calculate overall values.

Installation and mounting

Mounting is carried out in a wind-tight device box complying with standards DIN EN IEC 60670-1 and DIN 49073. The device is inserted into the box using the included mounting ring and then fitted with the appropriate frame. Electrical connection is made via the KNX plug-in terminal. Installation requires no additional tools, although the use of a suitable frame is necessary to ensure optical integration into the existing switch series.

Advantages in operation

The KNX VOC/TH-UP Touch enables precise and automated room climate control. The integrated sensors provide continuous measurement values used to control heating, cooling, and ventilation. The logic functions allow complex linking of sensor data to achieve optimal operating conditions. The warning function for leaving the comfort zone according to DIN 1946 supports compliance with comfort standards. The display shows current values and allows direct interaction via the touch buttons. Configuration is done via ETS 5 software, enabling flexible adaptation to individual requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1147862
qrcode für Elsner 70973 room controller deep black RAL 9005