Elsner 70952, EAN: 4051996709527

Elsner 70952 switch for light black RAL 9005

Elsner 70952 switch for light black RAL 9005

Lieske Part No. 1147856
Mfg Part No 70952
EAN-Code 4051996709527
Manufacturer Elsner
Here only 220,24 EUR
262,09 EUR incl. VAT

Further information for Elsner 70952 switch for light black RAL 9005

Technical data
HousingReal glass, plastic
Colourssimilar to RAL 9010 pure white, similar to RAL 9005 deep black
Mountingflush-mounted (wall installation in device box Ø 60 mm, 42 mm deep, or hollow wall box for drilling hole Ø 68 mm)
Degree of protectionIP 20
Dimensionshousing approx. 55 x 55 (W x H, mm), mounting depth approx. 10 mm, mounting plate approx. 71 x 71 (W x H, mm)
Weight totalca. 50 g
Ambient temperatureoperation and storage -25…+85°C
Ambient air humiditymax. 95% rF, avoid condensation
Operating voltageKNX bus voltage
Bus currentmax. 19 mA
Data outputKNX +/- bus terminal
Group addressesmax. 205
Assignmentsmax. 205
Communication objectsCala KNX MutliTouch T Light/Sunblind: 199, Cala KNX MutliTouch T Light/Scenes: 198, Cala KNX MutliTouch T Light: 198
Temperature measurement range25…+85°C
The Elsner Cala KNX MultiTouch T Light, black RAL 9005 (manufacturer number 70952), is a KNX glass pushbutton for lighting control and temperature regulation in intelligent building automation systems. The device features a touch-sensitive surface made of real glass, with printed areas for lighting and temperature functions. The integrated LEDs in the symbols (white for lighting, red and blue for temperature) can be configured to indicate different operating states. The pushbutton is designed for under-recessed mounting and is installed into a device box with a diameter of 60 mm and a depth of 42 mm. The carrier plate measures approximately 71 x 71 mm, the housing itself measures approximately 55 x 55 mm (W x H) and has a projection depth of about 10 mm. The device is designed for indoor use and complies with protection rating IP 20. The operating temperature ranges from -25 °C to +85 °C, and the ambient air humidity must not exceed 95 % rF, with condensation to be avoided.

Applications

The pushbutton is intended for integration into KNX systems in residential and commercial construction, where intuitive and aesthetically pleasing control of lighting, heating, and climate is required. It is particularly suitable for rooms with high demands on design and functionality, such as living rooms, offices, or hotel rooms. The real glass surface and the deep black finish (similar to RAL 9005) allow seamless integration into modern interior designs.

Functions and Equipment in Detail

The pushbutton offers a total of nine touch surfaces, which can be individually assigned to various bus functions such as switches, toggle switches, dimmers, blinds, awnings, roller shutters, windows, value transmitters (8- or 16-bit), or scene calls. Lighting control includes three surfaces for switching and dimming, while temperature regulation includes three surfaces for setting warmer", "cooler", and switching between heating and cooling. The LED indicators are configurable: different operating modes such as "all LEDs off", "all LEDs on", "active LEDs always on, or time-controlled displays after button press can be selected. The brightness of the LEDs is pre-settable for day and night operation. When an object is locked (value = 1), the LED can blink, providing visual feedback.

Technology Explained Simply

The device integrates a temperature sensor that measures ambient temperature. The measurement range is between 25 °C and +85 °C. The device can also receive external temperature values via the KNX bus and combine them with its own measurement value to create a mixed value, with the proportion being adjustable in percentage. Temperature values can be output as minimum and maximum values. A PI controller regulates heating and cooling, with control based on separate setpoint values or a base setpoint temperature. The setpoint temperature is adjusted via the touch buttons "+" and "-". Additionally, the device features 4 AND and 4 OR logic gates, each with four inputs. Inputs can be switching events as well as 8 logic inputs in the form of communication objects. The output of each gate can be configured as 1 bit or 2 x 8 bits.

Compatibility and Accessories

The device is designed for use in the KNX bus and is configured via the KNX software ETS 5. Data output occurs via a KNX +/- bus terminal block. The operating voltage corresponds to the KNX bus voltage, and the maximum bus current is 19 mA. The maximum number of group addresses and assignments is 205 each. The communication objects vary by model: Cala KNX MultiTouch T Light/Sunblind has 199 objects, Cala KNX MultiTouch T Light/Scenes has 198, as does the model Cala KNX MultiTouch T Light. Configuration is done via the ETS software, where functions such as scene control (3 scene channels with 5 objects each) or surface function when five or more buttons are touched simultaneously (configurable as switch, toggle switch, value transmitter, or scene call) can be individually set.

Mounting and Installation

Installation is carried out in a device box with a diameter of 60 mm and a depth of 42 mm. Alternatively, a hollow wall box for a drilling hole with a diameter of 68 mm can be used. The device is supplied with a carrier plate (71 x 71 mm), which is inserted into the box. The pushbutton itself is mounted onto the carrier plate. Installation is done using the under-recessed method, with the electrical connection made via the KNX bus terminal block.

Advantages in Operation

The pushbutton offers intuitive operation through the touch-sensitive surfaces and visual feedback via the LEDs. The integrated temperature measurement and PI controller enable precise climate control. The logic gates allow complex control sequences beyond standard functions. The configurability of the surfaces and LEDs provides flexibility in adapting to individual requirements. Compatibility with ETS software ensures professional integration into existing KNX systems. The device is designed for indoor use and meets safety and functionality requirements in modern building automation systems.

The delivery includes the pushbutton in housing, the carrier plate, and a datasheet with installation instructions in multiple languages (German, English, French, Italian, Spanish). A manual and product file are available for download.

Note: Batteries are not included in the delivery scope.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1147856
qrcode für Elsner 70952 switch for light black RAL 9005