| General |
| Housing | Plastic |
| Colour | white/translucent |
| Degree of protection | IP44 |
| Weather station dimensions (W × H × D) Ring with base | ≈ 260 mm × 145 mm × 300 mm |
| Mast extension dimensions Length Pipe diameter Mast mounting (screw clamp) Plate (H × W × D) Hole spacing | 50 cm, 50 mm, 40...60 mm, 130 mm × 110 mm × 4 mm, 70 mm |
| Power supply unit dimensions (W × H × D), 3TE | ≈ 54 mm × 95 mm × 68.5 mm |
| Weight weather station mast extension (including bracket) power supply connection accessories | ≈ 600 g, ≈ 1 kg, ≈ 210 g, ≈ 430 g |
| Ambient temperature | 30...+50°C |
| Storage temperature | 30...+70°C |
| KNX bus |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 2000 |
| Maximum assignments | 2000 |
| Communication objects | 1415 |
| Electricity consumption | ≤ 10mA |
| Time until data reception after bus voltage recovery | ≈ 8 s |
| Power supply |
| Voltage (yellow + / white -) | 24V DC SELV ±10 % |
| Power consumption [at] | Heating off: 6W [t > 7.5°C], Heating on: ≤ 40W [t ≤ 7.5°C] |
| Sensors |
| Temperature measurement range | 30...+50°C |
| Humidity measurement range (rH) | 0%…100 % |
| Wind speed measurement range | 0…35 m/s |
| Wind direction measurement range [from wind speed] | 0...360° [v > 0.5 m/s] |
| Pressure measurement range | 300 mbar … 1100 mbar |
| Brightness measurement range | 0 Lux … 150 000 Lux |
The Elsner Suntracer KNX pro weather station (type 70900) is an integrated measurement and control system for the KNX building bus system. It measures meteorological parameters such as brightness, wind speed and direction, temperature, air humidity, air pressure, and precipitation. The station features an integrated GPS receiver that receives exact time and location coordinates, and calculates the position of the sun (azimuth and elevation) from this data. These data are used for intelligent control of shading systems and other building technical functions.
Applications
The weather station is designed for outdoor use, for example on roofs, facades, or near window fronts. It is suitable for controlling sun protection systems, ventilation systems, heating and air conditioning systems, as well as for automated control of lighting and switching functions in buildings. The integrated shading control enables control of up to 12 facades with louver tracking and shadow edge tracking. The functions are designed for buildings with KNX infrastructure that require decentralized, data-based control.
Functions and equipment in detail
The station measures brightness using five separate sensors and outputs the highest value. The measurement range is from 0 to 150,000 Lux. Precipitation detection is performed via a heated sensor surface that recognizes drops and flakes as precipitation, but not fog or dew. As soon as the precipitation stops, the sensor dries quickly and the notification ends. Wind speed is measured using ultrasonic technology, with a measurement range from 0 to 35 m/s. Wind direction is detected from a speed of 0.5 m/s and is indicated in the range of 0° to 360°. Temperature is measured in the range of -30 °C to +50 °C, with the perceived temperature calculated taking into account wind and humidity. Relative air humidity is measured in the range of 0 % to 100 %, and additionally, the dew point is calculated. Air pressure is measured in the range of 300 to 1100 mbar. The station detects whether the values for temperature and humidity lie within the comfort zone according to DIN 1946.
Technology explained simply
The weather station operates via the KNX-TP1-256 bus medium in S-Mode. It supports up to 2000 group addresses and assignments as well as 1415 communication objects. The power consumption on the bus is a maximum of 10 mA. The station features an integrated weekly and calendar time switch. The weekly time switch offers 24 time intervals that can be parameterized as output or input. The calendar time switch allows four time intervals with two on/off switches per day. Configuration is done via the KNX software ETS 5. Power supply is via 24 V DC SELV ±10 %. Power consumption is 6 W with heating switched off (temperature above 7.5 °C) and up to 40 W with heating switched on (temperature below 7.5 °C). The station is designed for ambient temperatures from -30 °C to +50 °C, with storage temperature between -30 °C and +70 °C.
Compatibility and accessories
The weather station is designed for the KNX system and can communicate with other KNX devices. The integrated logic functions include 8 AND and 8 OR logic gates, each with 4 inputs. As inputs, switching events as well as 16 logic inputs in the form of communication objects can be used. The outputs of the gates can be configured optionally as 1 bit or 2 x 8 bits. Additionally, 8 multifunction modules (calculators) are integrated, which can modify input data through calculations, condition checks, or data point type conversions. The summer compensation for cooling allows adjustment of the target temperature in the room according to the outside temperature via a characteristic curve, with minimum and maximum target values being definable.
Mounting and installation
The weather station is delivered with a mast extension tube (50 cm long, tube diameter 50 mm) that can be attached to masts with a diameter of 40 to 60 mm using two screw brackets. Mounting is done via a base holder with a DIN 933 M5x20 A2 screw. The delivery includes six self-locking M5 nuts and two matching wrenches. A spirit level is used for alignment. Connection is made via a 10 m long, 4-pole M8 cable. The station itself has a plastic housing in white/translucent and a protection rating of IP44. The dimensions of the weather station with base are approximately 260 mm (W) × 145 mm (H) × 300 mm (D). The power supply unit (3TE) has dimensions of approximately 54 mm (W) × 95 mm (H) × 68.5 mm (D). The total weight of the weather station is approximately 600 g, the mast extension weighs approximately 1 kg, the power supply unit weighs approximately 210 g, and the connection accessories weigh approximately 430 g.
Advantages in operation
The weather station provides a comprehensive data basis for intelligent building automation. The combination of meteorological sensors, GPS receiver, and integrated logic functions enables precise, reactive control of building technology. The shading control for up to 12 facades reduces the load from solar radiation and improves comfort. The automatic adjustment of the target temperature for cooling (summer compensation) optimizes energy consumption. The use of logic gates and multifunction modules allows flexible, application-specific configurations without additional hardware. The time and calendar functions support scheduling of switching operations independently of external signals. The station is designed for outdoor use, with protection rating IP44 providing protection against splashing water and dust. Power supply via 24 V DC SELV ensures safe power supply.