| General |
| Housing | real glass, plastic, metal |
| Housing colour (similar) | RAL 9010 (white), RAL 9005 (black) |
| Degree of protection (after installation) | IP20 |
| Dimensions (W × H × D) | 55mm × 55mm × 35mm |
| Mounting ring (W × H) | 71 mm × 71 mm |
| Installation depth | ≈ 7mm |
| Weight total | ≈ 50g |
| Ambient temperature | 5…+45°C |
| Ambient air humidity (rH) (non-condensing) | 0...95% |
| Storage temperature | 25...+70°C |
| Over voltage category | III |
| Pollution degree | 2 |
| KNX bus |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 183 |
| Maximum assignments | 183 |
| Communication object | 73 |
| Nominal voltage | 30V DC SELV |
| Electricity consumption | ≤ 15 mA |
| KNX connector terminals wire diameter stripping length | 0.6…0.8mm s, 5mm |
| Time delay after bus voltage recovery until data reception | ≈ 5s |
| Sensors |
| Temperature measurement range | 5…+60°C |
The Elsner Cala KNX M4-T is a four-way switch with an integrated temperature sensor, specifically designed for integration into KNX building bus systems. The device features touch-sensitive switching surfaces that serve as touch switches and enable various functions via the KNX protocol, such as lighting control, dimming, drive control, value transmission, or scene recall. The surface consists of real glass, plastic, and metal, with the housing available in pure white (RAL 9010) or black (RAL 9005). After installation, the device achieves a protection rating of IP20, providing protection against contact with fingers and against solid foreign objects up to 12.5 mm in diameter. Dimensions are 55 mm (width) × 55 mm (height) × 35 mm (depth), the mounting depth is approximately 7 mm, and the total weight is approximately 50 g. The operating environment is specified for temperatures from 5 to +45 °C and relative humidity from 0 to 95 % (non-condensing).
Applications
The switch is intended for flush installation in residential and commercial buildings where intelligent building automation is implemented via the KNX system. It is particularly suitable for rooms requiring precise temperature monitoring and control, such as apartments, offices, hospitals, or hotels. The integrated temperature measurement allows for ambient temperature detection in the range of 5 to +60 °C. These measured values can be received via the bus and combined with internal data to calculate a mixed value, where the percentage contribution of external values is configurable. This enables the device to be used in combination with other sensors or heating controls to ensure optimized room climate regulation.
Functions and Equipment in Detail
The device features four independent touch surfaces, each of which can be configured as a switch, toggle switch, dimmer, value transmitter (8- or 16-bit), or for scene recall. A special function is the area function, which is activated when three or more buttons are touched simultaneously. This function is also configurable and can be used as a switch, toggle switch, value transmitter, or scene recall. Each touch surface integrates a white LED, whose behavior can be set via the KNX software ETS. The LED can, for example, be turned on when an object value is 1, turned off when 0, turned on for a configurable duration after pressing the button, or permanently turned off. Additionally, the LED can blink when a lock object value is 1, providing a visual indication for locked functions.
Technology Explained Simply
The switch communicates via the KNX bus medium TP1-256 and operates in S-Mode, a configuration mode that enables simple and secure parameterization. The device has 73 communication objects, supporting up to 183 group addresses and assignments. The nominal voltage is 30 V DC SELV (safe extra-low voltage), and the current consumption is up to 15 mA. The connection terminals for the KNX bus are designed for conductor diameters of 0.6 to 0.8 mm, with a stripping length of 5 mm. After the bus voltage is restored, it takes approximately 5 seconds for the device to resume data reception. The overvoltage category III and pollution degree 2 indicate a robust design suitable for indoor use with normal pollution.
Compatibility and Accessories
The switch is designed for mounting in a device box with a diameter of 60 mm and a depth of 42 mm. It is delivered with a mounting plate for securing in an enclosure or wall box. Configuration is performed via the KNX software ETS, where communication objects can be linked using AND and OR logic gates. Each gate has four inputs, which can either be switching events or communication objects. The output of each gate can be configured as 1 bit or 2 x 8 bits, enabling flexible control.
Installation and Mounting
Installation is carried out in a suitable device box, taking into account the mounting depth of approximately 7 mm. The switch is inserted into the box using the included mounting plate and then fitted with a frame that matches the existing switch range. Electrical connection is made via the KNX plug terminals, ensuring compliance with the specified conductor diameters and stripping lengths. Installation does not require additional tools, but the use of a matching frame is necessary to integrate the device visually into the existing interior design.
Advantages in Operation
The Elsner Cala KNX M4-T offers high flexibility through the configurable functions of the touch surfaces and the integrated temperature measurement. The combination of switch functionality and sensor technology enables centralized control of lighting, heating, and other devices via a single device. The LED indication provides clear visual feedback, and the logic gates allow for complex control sequences. The use of SELV voltage and compliance with standards for overvoltage category III and pollution degree 2 ensure safe and reliable operation in indoor environments. Configuration via ETS enables professional and detailed settings that can be adapted to the specific requirements of the building.