Elsner 70872, EAN: 4051996708728

Elsner 70872 double switch with temperature sensor deep black

Elsner 70872 double switch with temperature sensor deep black

Lieske Part No. 1147855
Mfg Part No 70872
EAN-Code 4051996708728
Manufacturer Elsner
Here only 160,43 EUR
190,91 EUR incl. VAT

Further information for Elsner 70872 double switch with temperature sensor deep black

General
Housingreal glass, plastic, metal
Housing colour (similar)RAL 9010 (white), RAL 9005 (black)
Degree of protection (after installation)IP20
Dimensions (W × H × D)55mm × 55mm × 35mm
Mounting ring (W × H)71 mm × 71 mm
Installation depth≈ 7mm
Weight total≈ 50g
Ambient temperature5…+45°C
Ambient air humidity (rH) (non-condensing)0...95%
Storage temperature25...+70°C
Over voltage categoryIII
Pollution degree2
KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses183
Maximum assignments183
Communication object55
Nominal voltage30V DC SELV
Electricity consumption≤ 15 mA
KNX connector terminals wire diameter stripping length0.6…0.8mm s, 5mm
Time delay after bus voltage recovery until data reception≈ 5s
Sensors
Temperature measurement range5…+60°C
The Elsner Cala KNX M2-T, type 70872, is a double push-button with integrated temperature sensor, specifically designed for integration into KNX building bus systems. The device features touch-sensitive switching surfaces, implemented as touch areas, used to control various functions in building automation systems. The buttons are configurable and can be used as switches, changeover switches, dimmers, value transmitters, or for scene calls. Each touch area is equipped with a white LED, whose operating status can be controlled via communication objects—for example, illumination when object value is 1, flashing when lock object value is 1, or time-controlled illumination after button press. The surface consists of real glass, plastic, and metal, with the housing color being deep black (similar to RAL 9005). After installation, the device operates with a protection rating of IP20, providing protection against finger contact and against solid foreign objects up to 12.5 mm in diameter. Dimensions are 55 mm (width) × 55 mm (height) × 35 mm (depth), with an installation depth of approximately 7 mm. The total weight is approximately 50 g.

Applications

The push-button is intended for installation in indoor environments, where it is integrated into existing switch rows. It is suitable for controlling lighting, devices, drives, dimmers, and scenes in intelligent building systems. The integrated temperature measurement enables ambient temperature detection in the range of 5 °C to +60 °C. These measured values can be combined with external temperature values to generate a mixed value, with the percentage contribution of individual values being configurable. This is particularly advantageous in heating and air conditioning control systems, where precise room temperature detection is required.

Functions and Equipment in Detail

The device features two independent touch buttons, each configurable as a switch, changeover switch, dimmer, value transmitter (8- or 16-bit), or for scene calls. Additionally, an area function is available, activated when both buttons are touched simultaneously, and can also be used as a switch, changeover switch, value transmitter, or scene function. The integrated LEDs can be individually configured: they illuminate when object value is 1, can be turned on for a user-defined duration after button press, or remain off permanently. The LED indication can also flash when lock object value is 1, visually signaling the status. Configuration is performed via the KNX software ETS, enabling assignment of group addresses, mappings, and logic functions.

Technology Explained Simply

The push-button operates in the KNX-TP1-256 bus medium and supports the S-Mode configuration mode. The nominal voltage is 30 V DC SELV (safe extra-low voltage), ensuring safe power supply in the building bus. The current consumption is up to 15 mA. The connection terminals for the KNX bus are designed for conductor diameters of 0.6 to 0.8 mm s, requiring a stripping length of 5 mm. After bus voltage recovery, it takes approximately 5 seconds for the device to resume data reception. The device features 55 communication objects, supporting up to 183 group addresses and 183 mappings. Overvoltage category III and pollution degree 2 meet requirements for installations in indoor environments with normal pollution. The operating ambient temperature ranges from 5 °C to +45 °C, with relative humidity (non-condensing) between 0 % and 95 % rH. Storage temperature is 25 °C to +70 °C.

Compatibility and Accessories

The push-button is designed for use in KNX systems and requires a compatible frame matching the switch series used in the building. The device is delivered with a carrier plate, a data sheet with installation instructions (in German, English, French, Italian, Spanish), and a manual available for download. Additionally, a product file is available for download. Configuration is performed via the ETS software provided by the KNX Alliance.

Installation and Mounting

Installation is carried out in a standard socket with Ø 60 mm and a depth of 42 mm. The push-button is mounted using the included carrier plate and inserted into the frame matching the existing switch series. Electrical connection is made via the KNX plug-in terminals, designed for conductor diameters of 0.6 to 0.8 mm s. Configuration in the KNX system is performed via the ETS software, allowing individual settings for group addresses, mappings, and logic functions.

Operational Advantages

The push-button offers intuitive operation through touch-sensitive surfaces that seamlessly integrate into interior design. The integrated temperature measurement enables precise room temperature detection, important for controlling heating and air conditioning systems. Logic functions with AND and OR gates enable complex control sequences beyond standard functions. The configurability of LEDs and support for scene functions increase flexibility in use. The use of real glass, plastic, and metal ensures a robust and aesthetically pleasing surface. Operational safety is ensured by overvoltage category III and pollution degree 2. Batteries are not included in the delivery scope.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1147855
qrcode für Elsner 70872 double switch with temperature sensor deep black