Elsner 70860, EAN: 4051996708605

Elsner 70860 single push-button pure white RAL9010

Elsner 70860 single push-button pure white RAL9010

Lieske Part No. 1147854
Mfg Part No 70860
EAN-Code 4051996708605
Manufacturer Elsner
Here only 149,16 EUR
177,50 EUR incl. VAT

Further information for Elsner 70860 single push-button pure white RAL9010

General
Housingreal glass, plastic, metal
Housing colour (similar)RAL 9010 (white), RAL 9005 (black)
Degree of protection (after installation)IP20
Dimensions (W × H × D)55mm × 55mm × 35mm
Mounting ring (W × H)71 mm × 71 mm
Installation depth≈ 7mm
Weight total≈ 50g
Ambient temperature5…+45°C
Ambient air humidity (rH) (non-condensing)0...95%
Storage temperature25...+70°C
Over voltage categoryIII
Pollution degree2
KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses183
Maximum assignments183
Communication object44
Nominal voltage30V DC SELV
Electricity consumption≤ 15 mA
KNX connector terminals wire diameter stripping length0.6…0.8mm s, 5mm
Time delay after bus voltage recovery until data reception≈ 5s
Sensors
Temperature measurement range5…+60°C
The Elsner Cala KNX M1-T is a single-button switch with an integrated temperature sensor, specifically designed for integration into KNX building bus systems. The device features a touch-sensitive switch surface made of real glass, characterised by a modern, flat surface. The touch surface is equipped with a white LED, whose operating behaviour can be configured via the KNX software ETS. The switch is delivered in the colour pure white RAL 9010 and seamlessly integrates into existing switch rows due to its modular design. Installation is carried out in a device box with a diameter of 60 mm and a depth of 42 mm, requiring a suitable frame for the front plate.

Applications

The switch is suitable for controlling various functions in building automation, such as lighting switching, dimming, blind and roller shutter control, as well as scene triggering. The integrated temperature measurement enables the detection of ambient temperature in the range of 5 to +60 °C. These measured values can be combined with external temperature values to determine a mixed value, where the proportion of individual values is adjustable in percentage terms. The application is intended for indoor use, as the protection rating IP20 after installation does not provide protection against contact or moisture in outdoor environments.

Functions and Equipment in Detail

The switch offers a configurable function as a switch, toggle switch, dimmer, blind or roller shutter control, awning, window control, value transmitter (8- or 16-bit), or for scene calling/storage. Each touch surface has an integrated LED, whose display (on/off) is controlled via object values. The LED can also be turned on for a configurable duration after pressing the button or blink when the lock object value = 1. Configuration is performed via the KNX software ETS, supporting up to 183 group addresses and assignments. The device has 44 communication objects.

Technology Explained Simply

The switch operates in S-Mode and uses the TP1-256 bus medium. The nominal voltage is 30 V DC SELV, with a current consumption of up to 15 mA. The connection terminals for the KNX bus are designed for conductor diameters of 0.6 to 0.8 mm, with a stripping length of 5 mm. After the bus voltage returns, it takes approximately 5 seconds before data can be received. The overvoltage category III and pollution degree 2 indicate use in normal indoor environments without special electrical or mechanical loads. The ambient temperature must be between 5 and +45 °C, and the humidity may reach up to 95 % (non-condensing).

Compatibility and Accessories

The device is designed for use in KNX systems and requires a device box with Ø 60 mm and a depth of 42 mm. A suitable frame for the front plate is required to integrate the device into existing switch rows. Configuration is performed via the ETS software. Additionally, two AND and two OR logic gates are integrated, each supporting four inputs. Inputs can be switching events as well as communication objects. The outputs of the logic gates can be configured as either 1 bit or 2 x 8 bits.

Mounting and Installation

Installation is carried out in a suitable device box, with the device’s mounting depth being approximately 7 mm. The housing consists of real glass, plastic, and metal and has dimensions of 55 mm × 55 mm × 35 mm. The mounting ring measures 71 mm × 71 mm. The total weight is approximately 50 g. Installation requires the use of a frame matching the switch series used in the building. The device is delivered with a datasheet and installation instructions (in German, English, French, Italian, Spanish), as well as a manual and product file available for download.

Operational Advantages

The switch offers intuitive operation via the touch surface and flexible configuration via ETS. The integrated temperature measurement enables precise ambient detection, which can be used for heating and climate control. The logic gates extend functionality by enabling complex control logics. Power supply is via the KNX bus (PoE), eliminating the need for additional power supply. Operational safety is supported by overvoltage category III and pollution degree 2.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1147854
qrcode für Elsner 70860 single push-button pure white RAL9010