| General |
| Housing | Plastic |
| Colours (similar) | RAL 9010 (white), RAL 9005 (black) |
| Degree of protection | IP20 |
| Dimensions (W × H × D) | 55mm × 55mm × 35mm |
| Mounting ring (W × H) | 71mm × 71mm |
| Installation depth | 10mm |
| Weight total | ≈ 50g |
| Ambient temperature | 5…+45°C |
| Ambient air humidity (rH) (non-condensing) | 0...95% |
| Storage temperature | 25...+70°C |
| Over voltage category | III |
| Pollution degree | 2 |
| KNX bus |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 205 |
| Maximum assignments | 205 |
| Communication objects | 86 |
| Nominal voltage | 30V DC SELV |
| Electricity consumption | ≤ 10mA |
| Connection KNX plug-in terminal conductor diameter | 0.6…0.8mm s |
| Connection KNX plug-in terminal stripping length | 5mm |
| Time until data reception after bus voltage recovery | ≈ 6s |
| Sensors |
| Detection method presence passive infrared technique | PIR |
| Presence detection angle horizontal | ≈ 150° |
| Presence detection angle vertical | ≈ 35° |
| Presence detection range | ≈ 5 m |
| Brightness measurement range | 0 Lux … 20 000 Lux |
| Temperature measurement range | 5…+60°C |
The Elsner KNX T-L-Pr-UP Touch, type 70850, is an indoor combination sensor for the KNX bus system, detecting presence, brightness, and temperature. The device features integrated touch buttons and logic gates to enable intelligent control functions in buildings. It is available in pure white RAL 9010 and is housed in a plastic housing that can be optically integrated into existing switch rows. Dimensions are 55 mm × 55 mm × 35 mm, the mounting depth is 10 mm, and the total weight is approximately 50 g. The protection rating IP20 safeguards against contact with conductive objects and splashing water, making the device suitable for indoor use.
Applications
The sensor is designed for use in offices, conference rooms, corridors, and other indoor spaces where automated lighting and heating control is required. Presence detection is achieved via a passive infrared (PIR) method, which detects people even with minimal movements such as sitting. The range is approximately 5 m, the horizontal detection angle is approximately 150°, and the vertical angle is approximately 35°. Brightness measurement is performed in the range of 0 to 20,000 Lux, enabling detection in bright rooms or rooms with daylight ingress. Temperature measurement is performed in the range of 5 to +60 °C. The device can receive external temperature values via the bus and combine them with its own measurement to form a mixed value, with the percentage contribution being adjustable.
Functions and Equipment in Detail
The device features two integrated touch buttons, which can be configured as bus buttons. These can be used as switches, toggle switches, dimmers, value transmitters (8- or 16-bit), or for scene recall/storage. The brightness threshold is adjustable, either via parameters or through communication objects. The threshold output can be connected to AND and OR logic gates, each having four inputs. Inputs can include switching events as well as eight logic inputs in the form of communication objects. The output of each gate can be configured as either 1 bit or 2 x 8 bits.
Technology Explained Simply
The sensor operates in the KNX network via the medium TP1-256 and in configuration mode S-Mode. The nominal voltage is 30 V DC SELV, and the current consumption is limited to ≤ 10 mA. Communication is via a KNX plug-in terminal, designed for conductor diameters of 0.6 to 0.8 mm s and requiring a stripping length of 5 mm. After the bus voltage is restored, it takes approximately 6 seconds to receive data. The maximum number of group addresses and assignments is 205 each, and the number of communication objects is 86. The ambient temperature must be between 5 and +45 °C, and the relative humidity (non-condensing) may be 0 to 95 %. The storage temperature is between 25 and +70 °C. The overvoltage category is III, and the pollution degree is 2.
Compatibility and Accessories
The device is designed for use in the KNX bus system and requires configuration via the KNX software ETS 5. It is delivered with a mounting ring and a KNX plug-in terminal. Installation requires a weatherproof device box according to DIN EN IEC 60670-1 / DIN 49073, as well as a frame for use in 55 mm × 55 mm switch boxes, which must match the switch program used in the building. The device is available in the colours RAL 9010 (white) and RAL 9005 (black).
Mounting and Installation
Mounting is done in a suitable device box that must be weatherproof. The mounting ring is inserted into the box, the device is placed onto the mounting ring, and connected to the KNX bus via the plug-in terminal. Configuration is done via the ETS software. The terminal requires a stripping length of 5 mm and is designed for conductor diameters of 0.6 to 0.8 mm s. The mounting depth of 10 mm must be considered during planning.
Advantages in Operation
The sensor enables intelligent, automated control of lighting and heating in indoor spaces. Presence detection ensures that lighting and heating are only activated when someone is present, saving energy. Brightness measurement allows lighting to be adjusted according to daylight conditions. The integrated logic gates and touch buttons offer flexibility in configuration and operation. The mixed value formation from internal and external temperature values enables precise room temperature control. Configuration via ETS 5 is standardized and allows integration into existing KNX systems. The delivery includes the housing with sensor, mounting ring, KNX plug-in terminal, as well as data sheet and manual in multiple languages available for download. The product file is also available for download.