| General |
| Housing | Real glass, plastic |
| Display visible diagonal | 2.3" (59 mm) |
| Display resolution [pixels] | 320 × 240 |
| Colours (similar) | RAL 9010 (white), RAL 9005 (black) |
| Degree of protection | IP20 |
| Dimensions (W × H × D) mounting ring (W × H) depth | 55 mm × 55 mm × 35 mm, 71 mm × 71 mm, 7 mm |
| Weight total | ≈ 90 g |
| Ambient temperature | 0…+45°C / -5…+45°C / -5…+45°C |
| Ambient air humidity (rH) (non-condensing) | 5...95 % |
| Storage temperature | 25...+70°C |
| Over voltage category | III |
| Pollution degree | 2 |
| Inputs |
| Number | 4 |
| Contact voltage | 3.3 V |
| Contact current | 0.33 mA |
| Temperature sensor T-NTC (No. 30516) measurement range at input | 40...+80°C |
| Maximum cable length T-NTC / digital inputs | 3 m / 10 m |
| KNX bus |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 2000 |
| Maximum assignments | 2000 |
| Communication objects | 471 / 433 / 379 |
| Nominal voltage | 30V DC SELV |
| Electricity consumption | ≤ 18mA |
| Connection KNX plug-in terminal conductor diameter | 0.8 mm s |
| Connection KNX plug-in terminal stripping length | 5 mm |
| Time until data reception after bus voltage recovery | ≈ 5 s |
| Sensors |
| CO2 measurement range | 400...5000 ppm |
| Humidity measurement range | 0...100 % |
| Temperature measurement range | 5…+60°C |
The Elsner Cala Touch KNX TH 3.x, type 70812, is a room controller with integrated temperature and humidity sensor, specifically designed for integration into KNX heating and building automation systems. The device features a colour touch display with a visible diagonal of 2.3 inches (59 mm) and a resolution of 320 × 240 pixels, supporting various display and operation pages. The surface consists of real glass and plastic, with the finish in deep black (RAL 9005). The housing is designed for indoor use and complies with protection class IP20. The mounting ring dimensions are 55 mm × 55 mm, the installation depth is 35 mm, and the total weight is approximately 90 g. The operating ambient temperature ranges from 0 °C to +45 °C, with storage temperature allowed between 25 °C and +70 °C. The ambient air humidity may reach up to 95 % (non-condensing).
Applications
The room controller is suitable for decentralised control of heating, ventilation and air conditioning systems, as well as lighting and shading control in residential and office buildings. It serves as a central operating and display unit for room climate data and enables control of heating, cooling and ventilation based on measured values. The integrated weekly time switch with eight time periods supports automated control according to predefined schedules. The device can also be used as a secondary station for operating another controller, enabling flexible adaptation to existing systems.
Functions and Equipment in Detail
The device offers a variety of operating and display functions via the touch display. These include display of current measurement values, control of lighting (switching, dimming, RGB, colour temperature, Human Centric Lighting), operation of shading and window drives (manual driving, position indication), and scene management (four scenes with storage and status indication). The integrated PI controllers enable control of heating and cooling based on temperature, and control of ventilation based on humidity. Control is performed according to separate setpoints or a base setpoint. For fan coil systems, a special fan convective heater control is provided.
Technology Explained Simply
The controller measures room temperature in the range of 5 °C to +60 °C and relative humidity from 0 % to 100 %. Additionally, CO₂ content is measured in the range of 400 ppm to 5000 ppm. The measured values can be combined with external values via the KNX bus to calculate mixed values (e.g. room average). The proportions of internal and external values are adjustable in percentage. The calculation of dew point and checking whether values lie within the comfort zone (DIN 1946) is also performed within the device. Limit values can be set via parameters or communication objects. The integrated logic gates (8 AND and 8 OR gates, each with four inputs) enable linking of switching states and communication objects. The gate outputs can be configured as 1 bit or 2 × 8 bits. Eight multifunction modules are used for processing input data via calculations, condition checks or data point type conversion. A control value comparator compares received values via communication objects and outputs them.
Compatibility and Accessories
The controller is designed for the KNX bus system and operates in TP1-256 mode. Configuration is performed in S-Mode. The maximum number of group addresses and assignments is 2000 each. Communication objects include 471/433/379. The nominal voltage is 30 V DC SELV, with a current consumption of up to 18 mA. The KNX plug terminal supports conductors with a diameter of 0.8 mm and a stripping length of 5 mm. The time until data reception capability after bus voltage recovery is approximately 5 seconds. The maximum allowable cable length is 3 metres for the T-NTC temperature sensor and 10 metres for digital inputs. The inputs are designed for binary contacts and support a contact voltage of 3.3 V and a contact current of 0.33 mA. The integrated sensors measure temperature, humidity and CO₂. The measurement ranges are defined as described above.
Mounting and Installation
The device is installed into a suitable switch series, with the frame adapted to the respective building standard. Mounting is performed at an installation depth of 35 mm, with the mounting ring dimensions being 55 mm × 55 mm. The total installation depth of the device is 7 mm. Installation is carried out via the KNX plug terminal, designed for conductors with a 0.8 mm diameter. The terminal requires a stripping length of 5 mm. Device settings can be adjusted via the display, including a screensaver function (clock, clock/indoor temperature/outdoor temperature alternating, off) and a key tone, both of which can be turned on or off.
Advantages in Operation
The room controller offers intuitive operation via the touch display and enables central control of various functions such as heating, ventilation, lighting and shading. The integrated sensors ensure precise capture of room climate data, guaranteeing efficient and comfortable control. The support for logic functions, multifunction modules and PI controllers extends functionality and enables complex control strategies. The weekly time switch supports automated control according to predefined schedules. Compatibility with the KNX standard ensures flexible integration into existing building automation systems. The device surface made of real glass and plastic in RAL 9005 seamlessly integrates into interior design.
Batteries are not included in the delivery scope.