| General |
| Housing | Real glass, plastic |
| Display visible diagonal | 2.3" (59 mm) |
| Display resolution [pixels] | 320 × 240 |
| Colours (similar) | RAL 9010 (white), RAL 9005 (black) |
| Degree of protection | IP20 |
| Dimensions (W × H × D) mounting ring (W × H) depth | 55 mm × 55 mm × 35 mm, 71 mm × 71 mm, 7 mm |
| Weight total | ≈ 90 g |
| Ambient temperature | 0…+45°C / -5…+45°C / -5…+45°C |
| Ambient air humidity (rH) (non-condensing) | 5...95 % |
| Storage temperature | 25...+70°C |
| Over voltage category | III |
| Pollution degree | 2 |
| Inputs |
| Number | 4 |
| Contact voltage | 3.3 V |
| Contact current | 0.33 mA |
| Temperature sensor T-NTC (No. 30516) measurement range at input | 40...+80°C |
| Maximum cable length T-NTC / digital inputs | 3 m / 10 m |
| KNX bus |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 2000 |
| Maximum assignments | 2000 |
| Communication objects | 471 / 433 / 379 |
| Nominal voltage | 30V DC SELV |
| Electricity consumption | ≤ 18mA |
| Connection KNX plug-in terminal conductor diameter | 0.8 mm s |
| Connection KNX plug-in terminal stripping length | 5 mm |
| Time until data reception after bus voltage recovery | ≈ 5 s |
| Sensors |
| CO2 measurement range | 400...5000 ppm |
| Humidity measurement range | 0...100 % |
| Temperature measurement range | 5…+60°C |
The Elsner Cala Touch KNX TH 3.x, type 70810, is a room controller with integrated temperature and humidity sensor, specifically designed for integration into KNX heating and building automation systems. The device features a colour touch display with a visible diagonal of 2.3 inches (59 mm) and a resolution of 320 × 240 pixels, supporting various display and operation pages. The surface consists of real glass and plastic, with the colour variant available in pure white (RAL 9010). The housing is designed for indoor use and complies with protection class IP20. The dimensions of the mounting ring are 55 mm × 55 mm × 35 mm, the mounting depth is 7 mm, and the total weight is approximately 90 g. The operating ambient temperature ranges from 0 °C to +45 °C, while the storage temperature may range from 25 °C to +70 °C. The ambient air humidity may be between 5 and 95 % (non-condensing).
Applications
The room controller is suitable for decentralised control and regulation of heating, ventilation and air conditioning systems, as well as for lighting and shading control in residential and office buildings. It enables the acquisition and evaluation of room climate data such as temperature, air humidity and CO₂ concentration (400 to 5000 ppm). The integrated weekly time switch with eight time slots supports automated control according to predefined schedules. The device can function as a secondary station for operating another controller and is thus flexibly integrable into existing KNX systems.
Functions and equipment in detail
The device offers a variety of operation pages, including display of current measurement values, a bus data display with four universal slots, temperature control with mode switching (heating/cooling), and operation options for lighting (switching, dimming, RGB, colour temperature, Human Centric Lighting), shading and windows (manual operation). It supports scene control (four scenes with storage and status display) and offers a screensaver function with options such as clock, clock with indoor temperature or outdoor temperature. The button function is switchable on and off. The integrated PI controllers regulate heating/cooling based on temperature and ventilation based on air humidity. Control is performed according to separate setpoints or base set temperature, with support for fan coil control for fan convectors.
Technology explained simply
The controller operates in the KNX-TP1-256 bus standard and supports the configuration mode S-Mode. The nominal voltage is 30 V DC SELV, and the current consumption is up to 18 mA. The maximum number of group addresses and assignments is 2000 each. The communication objects are available in three variants: 471, 433 and 379. The KNX plug terminal allows connection of conductors with a diameter of 0.8 mm and a stripping length of 5 mm. After the bus voltage returns, it takes approximately 5 seconds to receive data. The four inputs can process binary contacts or a T-NTC temperature sensor (measurement range 40 to +80 °C). The maximum cable length is 3 m for the T-NTC sensor and 10 m for digital inputs. The integrated mixed value calculation enables the combination of internal and external measurement values, with the percentage share being adjustable. The calculation of the dew point and evaluation of values in relation to the comfort zone according to DIN 1946 are also integrated. Limit values can be set via parameters or communication objects.
Compatibility and accessories
The controller is designed for use with the KNX bus system and can communicate with other KNX devices. The integrated logic functions include eight AND and eight OR logic gates, each with four inputs. As inputs, switching events as well as 16 logic inputs in the form of communication objects can be used. The outputs of the gates can be configured as either 1 bit or 2 × 8 bits. Eight multifunction modules enable calculations, condition checks or conversion of data point types. An integrated actuator value comparator can compare received values and output them. The devices are designed for mounting in standard installation switch boxes and adapt to the used switch series via the frame.
Mounting and installation
Mounting is carried out in a standard installation switch box. The mounting ring has dimensions of 55 mm × 55 mm × 35 mm, and the mounting depth is 71 mm × 71 mm. Installation is performed via the KNX plug terminal, with conductor diameters of 0.8 mm and a stripping length of 5 mm. The overvoltage category is III, and the pollution degree is 2. The devices are intended for indoor use and require no special mounting aids.
Advantages in operation
The room controller offers intuitive operation via the touch display and enables central control of various functions such as heating, ventilation, lighting and shading. The integrated sensors ensure precise acquisition of room climate data, ensuring efficient and comfortable control. The weekly time switch and logic functions enable automated control according to predefined schedules and conditions. Compatibility with the KNX standard ensures flexible integration into existing building automation systems. The devices are suitable for use in residential and office buildings and support energy-efficient operation through targeted control of climate and lighting systems.