Elsner 70800, EAN: 4051996708001

Elsner 70800 KNX temperature sensor with display white

Elsner 70800 KNX temperature sensor with display white

Lieske Part No. 701103
Mfg Part No 70800
EAN-Code 4051996708001
Manufacturer Elsner
Here only 281,81 EUR
335,35 EUR incl. VAT

Further information for Elsner 70800 KNX temperature sensor with display white

General
HousingReal glass, plastic
Display visible diagonal2.3" (59 mm)
Display resolution [pixels]320 × 240
Colours (similar)RAL 9010 (white), RAL 9005 (black)
Degree of protectionIP20
Dimensions (W × H × D) mounting ring (W × H) depth55 mm × 55 mm × 35 mm, 71 mm × 71 mm, 7 mm
Weight total≈ 90 g
Ambient temperature0…+45°C / -5…+45°C / -5…+45°C
Ambient air humidity (rH) (non-condensing)5...95 %
Storage temperature25...+70°C
Over voltage categoryIII
Pollution degree2
Inputs
Number4
Contact voltage3.3 V
Contact current0.33 mA
Temperature sensor T-NTC (No. 30516) measurement range at input40...+80°C
Maximum cable length T-NTC / digital inputs3 m / 10 m
KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses2000
Maximum assignments2000
Communication objects471 / 433 / 379
Nominal voltage30V DC SELV
Electricity consumption≤ 18mA
Connection KNX plug-in terminal conductor diameter0.8 mm s
Connection KNX plug-in terminal stripping length5 mm
Time until data reception after bus voltage recovery≈ 5 s
Sensors
CO2 measurement range400...5000 ppm
Humidity measurement range5...95 %
Temperature measurement range5…+60°C
The Elsner Cala Touch KNX T 3.x, type 70800, is a room controller with an integrated temperature sensor, specifically designed for integration into KNX heating and building automation systems. The device features a colour touch display with a visible diagonal of 2.3 inches (59 mm) and a resolution of 320 × 240 pixels, used for displaying various operation and information screens. The surface is finished in pure white (RAL 9010), with a black variant (RAL 9005) also available. The housing is made of real glass and plastic and has a protection rating of IP20, providing protection against finger contact and solid foreign objects, but not against water or dust. The dimensions of the mounting ring are 55 mm × 55 mm × 35 mm, the mounting depth is 7 mm, and the total weight is approximately 90 g. The device is designed for an ambient temperature of 0 to +45 °C, with storage temperatures allowed between 25 and +70 °C. The ambient air humidity may range between 5 and 95 %, without condensation occurring.

Applications

The room controller is intended for decentralised control and regulation of heating, ventilation, and air conditioning systems, as well as for lighting and shading control in residential and office buildings. It serves as a central operation and display unit within the room, enabling the display of measured values, control of lighting, shading, window drives, and the use of scenes and a weekly time switch. The integrated temperature control supports the regulation of heating and cooling circuits, and can also control fan-coil systems. The mixed value calculation allows combining internally measured and externally received temperature values via the KNX bus, with the proportion being adjustable in percentage terms.

Functions and Equipment in Detail

The device has four inputs, which can be used either as binary contacts or for connecting a T-NTC temperature sensor (part number 30516). The measurement range of the integrated temperature sensor is between 5 and +60 °C, while the T-NTC sensor covers a range of 40 to +80 °C. The maximum cable length is 3 metres for the T-NTC sensor and 10 metres for digital inputs. Additionally, the device measures room air humidity in the range of 5 to 95 % rF and CO2 content in the range of 400 to 5000 ppm. The display and operation screens include, among others, the display of current measured values, bus data display, temperature control with mode switching (heating/cooling), control of shading and window drives, lighting switch and dimming functions (including RGB and colour temperature control), scene control, a weekly time switch with eight time periods, and device settings. An integrated screen saver with various display modes (clock, alternating clock/indoor temperature/outdoor temperature, off) and an optional audible key tone are also included.

Technology Explained Simply

The Cala Touch KNX T 3.x operates within the KNX bus system via the TP1-256 medium and supports the S-Mode configuration mode. The nominal voltage is 30 V DC SELV, with a maximum current draw of 18 mA. Communication takes place via a KNX plug-in terminal, designed for conductors with a diameter of 0.8 mm s and a stripping length of 5 mm. The maximum number of group addresses and assignments is 2000 each. The device has 471 communication objects in the input, 433 in the output, and 379 in the internal area. After a bus voltage recovery, it takes approximately 5 seconds before data can be received. The integrated functions include 8 AND and 8 OR logic gates, each with four inputs, which can be used for switching and logic functions. Additionally, there are 8 multifunction modules (calculators) that can modify input data through calculations, condition checks, or data point type conversions. Four setpoint comparators allow the output of minimum, maximum, or average values from up to five received values. An integrated PI controller regulates heating and cooling circuits based on temperature, with regulation possible according to separate setpoints or a base setpoint temperature. The summer compensation for cooling adjusts the setpoint temperature according to the outdoor temperature, with minimum and maximum setpoints being definable.

Compatibility and Accessories

The device is designed for integration into KNX systems and can be connected to other KNX components such as sensors, actuators, switches, and control devices. Connection is made via the TP1-256 medium. The functions of the device can be combined with other KNX devices to fulfil complex control and regulation tasks. The use of a T-NTC temperature sensor (part number 30516) is optional, but recommended for accurate temperature measurement. The devices are designed for mounting in standard installation switches and adapt to the used switch series via the frame.

Mounting and Installation

Mounting is done in a standard installation switch, with the mounting ring having dimensions of 55 mm × 55 mm × 35 mm. The mounting depth is 71 mm × 71 mm, requiring a minimum mounting height of 7 mm. Installation is carried out via the KNX plug-in terminal, using conductors with a diameter of 0.8 mm s and a stripping length of 5 mm. The electrical connection is made via the KNX bus medium TP1-256. Device configuration is performed in S-Mode, with settings adjustable via the display or an external configuration software.

Advantages in Operation

The room controller offers intuitive operation via the touch display and enables central control of various functions within the room. The integrated temperature control with PI controller ensures precise and energy-efficient climate control. The mixed value calculation allows combining internal and external temperature values, enabling more accurate regulation. The logic functions (AND and OR gates, multifunction modules, setpoint comparators) allow complex control sequences that can be adapted to individual requirements. The weekly time switch with eight time periods supports automated control according to a schedule, enabling energy savings. The display of CO2 and humidity values supports indoor air quality and can be used for controlling ventilation systems. Compatibility with various KNX components and the possibility of individual configuration make the device a flexible component in modern building automation systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/701103
qrcode für Elsner 70800 KNX temperature sensor with display white