| Technical data |
| Housing | Plastic |
| Colour | Black |
| Degree of protection | IP 40 |
| Dimensions | ca. 64 x 122 x 11 (B x H x T, mm) |
| Display | Colour TFT, capacitive, dimmable, resolution 320 x 480 pixels |
| Weight | ca. 100 g |
| Ambient temperature | operation 0…+50 °C, storage -10…+60 °C |
| Ambient air humidity | 5... 95% rH, avoid condensation |
| Operating voltage | Integrated battery 3.8 V DC |
| Frequency range | 868.0...868.6 MHz |
| Transmitting power | max. 25 mW |
| Channels | 32 |
| Data output | KNX RF (S-Mode) |
| Group addresses | max. 512 |
| Maximum assignments | 1024 |
| Communication objects | 417 |
The Elsner Remo KNX RF (type 70747) is a wireless remote control for KNX RF systems, serving as a handheld transmitter with an integrated touch display. The device enables manual control of bus participants in the KNX system and is designed for operating lighting, heating, blinds, window drives, and multimedia technology. Operation is performed via a capacitive colour TFT display with a resolution of 320 x 480 pixels, which is dimmable and thus remains clearly readable under various lighting conditions. The housing is made of plastic, is black, and complies with protection class IP 40, providing protection against contact with tools and limited splashing water. Dimensions are approximately 64 x 122 x 11 mm, and the weight is about 100 g.
Applications
The remote control is intended for use in intelligent building automation systems, particularly in residential and office buildings, where central control of lighting, climate, and roller shutters via a KNX network is required. It is especially suitable for applications where flexible, wireless control of multiple devices via a single unit is desired. Functions include switching and dimming of light sources, controlling drives such as awnings, blinds, or windows, adjusting room temperature, and controlling multimedia equipment such as TVs or music systems. Additionally, scenes can be recalled and saved, and sensor values such as status messages can be displayed on the screen.
Functions and Equipment in Detail
The device features 32 channels, which are configured in the ETS software (Engineering Tool Software). The touch buttons can be individually named and sorted in display order directly on the device or via the ETS software. Configuration is performed exclusively via the KNX software ETS. The remote control supports control of RGBW lighting, allowing adjustment of colour temperature and light colour. The battery charge level indicator and a warning when charge falls below 20% can be sent to the bus to ensure operational reliability. Display settings can be locked and unlocked via the application or the bus, providing additional security.
Technology Explained Simply
The Remo KNX RF communicates via the KNX RF wireless standard in S-Mode, operating in the frequency range of 868.0 to 868.6 MHz. Maximum transmission power is 25 mW, providing sufficient range in typical indoor environments. Operating voltage is supplied by an integrated lithium battery with 3.8 V DC. The battery is rechargeable via a USB 2.0 Micro-B charger, which is available as optional accessory (item number 10155). The remote control supports up to 512 group addresses and enables a maximum of 1024 assignments and 417 communication objects. Operating ambient temperature ranges from 0 to +50 °C, with storage possible between -10 and +60 °C. Relative humidity should be between 5 and 95 % rF, avoiding condensation.
Compatibility and Accessories
The remote control is designed for KNX RF systems. To communicate with wired KNX devices (KNX TP), a media coupler is required to connect KNX RF and KNX TP. The device comes equipped with a USB connection cable (0.5 m, USB-A to USB-B Micro) for charging the battery. The delivery includes the wireless remote control with integrated battery, the USB connection cable, a data sheet with installation instructions (in German, English, French, Spanish, Italian), and a manual available for download (in the same languages). Additionally, a product file for ETS 5 is available for download.
Mounting and Installation
The remote control is used as a handheld transmitter and does not require fixed mounting. Installation is performed via the ETS software, where channels and functions are configured. Assignment of functions to the touch buttons is also done via the ETS software or directly on the device. Configuration is thus flexible and adaptable to specific requirements. The remote control is intended for indoor use, with ambient conditions (temperature, humidity) maintained within the specified range.
Operational Advantages
The Remo KNX RF offers intuitive operation via the touch display, enabling control of multiple devices via a single unit. The ability to individually name buttons and change display order enhances user-friendliness. Integration of functions such as scene control, RGBW lighting, and multimedia technology in one device reduces the number of required control units. The battery charge level indicator and low-charge warning ensure continuous availability. Configuration via ETS enables professional and flexible integration into existing KNX systems.