| Technical data |
| Housing | Plastic |
| Degree of protection | IP 54* |
| Dimensions | ca. 149 x 37 x 26 (B x H x T, mm) |
| Weight | ca. 140 g |
| Ambient temperature | operation -20…+55°C, storage -30…+85°C |
| Ambient air humidity | max. 95% rF, avoid condensation |
| Operating voltage | 230 V AC |
| Input | STAS3 plug (230 V) |
| Output | STAK3 coupling, rated up to max. 4 A / 230 V AC |
| Frequency range | 868.0...868.6 MHz |
| Transmitting power | max. 25 mW |
The Elsner motor control device 70711, type KNX RF-MSG-ST, is a wireless actuator for controlling a 230 V drive in the KNX wireless standard. It is used for remote control of blinds, roller shutters, awnings, or windows and integrates into existing KNX wireless installations. The device receives control signals wirelessly in the frequency range of 868.0 to 868.6 MHz and has a maximum transmission power of 25 mW. Communication takes place in the KNX RF S standard, developed for wireless building automation. The housing is made of plastic and provides an IP 54* protection rating, ensuring a certain level of dust and splash water protection. The operating temperature ranges from -20 °C to +55 °C, and storage is permitted up to +85 °C. The maximum ambient air humidity is 95 % rH, with condensation to be avoided. The device weighs approximately 140 g and has dimensions of approx. 149 x 37 x 26 mm (W x H x D). The operating voltage is 230 V AC, with the input connected via an STAS3 plug and the output via a STAK3 coupling, rated up to max. 4 A / 230 V AC.
Applications
This device is specifically designed for use in buildings with KNX wireless infrastructure. It is suitable for controlling electric drives for windows, roller shutters, blinds, and awnings. The functionality enables flexible integration into intelligent building automation systems, particularly in residential and office buildings where wireless control of window systems is desired. The retransmitter function (from version 1.1) supports signal transmission in the network by forwarding received KNX RF telegrams to other participants with the same domain address, thereby increasing signal range.
Functions and Equipment in Detail
The device features automatic runtime measurement of drives, used for positioning and providing a fault notification object. Position feedback enables monitoring of the drive position, and for blinds, also the slat position. A position memory via a 1-bit object allows saving and recalling positions, for example via a pushbutton, and supports external automation functions. Scene control offers 16 scenes per drive, with blinds also allowing control of slat position. Lockout objects and alarm notifications have different priorities, ensuring safety functions such as wind lockout take precedence. The control can be switched between manual and automatic operating modes, either via a predefined time or via communication objects. Additionally, a short-term restriction (drive command blocked) and two drive restrictions are integrated. Configuration is performed using the KNX software ETS 5.
Technology Explained Simply
The KNX RF-MSG-ST operates in the KNX RF S wireless standard, developed for wireless communication in building automation systems. Wireless transmission occurs in the 868 MHz band, with a maximum transmission power of 25 mW. The retransmitter function (from version 1.1) ensures that received telegrams are forwarded to other devices in the network, increasing signal range within the building. Positioning is achieved via automatic runtime measurement, allowing the device to determine the exact position of the drive. Position feedback enables precise control and monitoring. Scene control with 16 scenes per drive offers flexibility in programming movement sequences.
Compatibility and Accessories
The device is designed for use with KNX wireless systems and requires configuration via the ETS 5 software. It is equipped with an STAS3 plug at the input and a STAK3 coupling at the output, enabling connection to standard 230 V drives. The delivery includes the actuator device, a magnet for programming (telescopic rod), and a datasheet with installation instructions in German, English, French, Italian, and Spanish. Additionally, a manual is available for download, as well as a product file for ETS 5 in the mentioned languages.
Mounting and Installation
Mounting is performed at a suitable location within the building, taking into account the IP 54* protection rating. The device is intended for indoor use, with ambient temperature and humidity within the specified limits. Installation requires connecting the STAS3 plug to the 230 V mains supply and the STAK3 coupling to the drive. Configuration is done via the ETS 5 software, with the device integrated into the network using the programming magnet.
Operational Advantages
The device offers reliable and flexible control of window systems within the KNX wireless network. The retransmitter function improves signal transmission, while automatic runtime measurement and position feedback enable precise positioning. Scene control and the ability to store positions enhance user-friendliness. Prioritization of safety functions ensures safe operation, especially under weather conditions. Configuration via ETS 5 is standardized and enables professional integration into existing systems.