| General |
| Housing | Plastic |
| Colours (similar) | RAL 9003 / RAL 9002 (white), RAL 9005 (black) |
| Dimensions (Ø × H) | 105 mm × 32 mm |
| Degree of protection | IP30 |
| Weight total | ≈ 55 g |
| Ambient temperature | TH-L-Pr : -5…+45°C, AQS/TH-D L-Pr: 0…+45°C |
| rH (relative humidity), non-condensing | TH-L-Pr : 5...95%, AQS/TH-D L-Pr: 5...85% |
| Storage temperature | TH-L-Pr : -20...+70°C, AQS/TH-D L-Pr: -25...+70°C |
| Over voltage category | III |
| Pollution degree | 2 |
| KNX bus |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 2000 |
| Maximum assignments | 2000 |
| Communication objects | TH-L-Pr : 377, AQS/TH-D L-Pr: 449 |
| Nominal voltage | 30V DC SELV |
| Electricity consumption | ≤ 20mA |
| Connection KNX plug-in terminal conductor diameter | Ø 0.8mm s |
| Connection KNX plug-in terminal stripping length | 5mm |
| Time until data reception after bus voltage recovery | ≈ 5 s |
| Sensors |
| Detection method presence passive infrared technique | PIR |
| Presence detection angle | ≈ 94° × 82° |
| Presence detection range | ≈ 5 m |
| Brightness measurement range | 0 Lux … 2000 Lux |
| CO2 measurement range | 400...5000 ppm |
| Temperature measurement range | 5…+60 °C |
| Humidity measurement range (rH) | 0...100 % |
| Pressure measurement range | 300 mbar … 1100 mbar |
The Elsner Sewi KNX TH L-Pr is a
KNX ceiling sensor for detecting temperature, relative humidity, brightness, and presence. It serves as a central measuring and control component in intelligent building automation systems, particularly in offices, conference rooms, and other indoor spaces where automated lighting and climate control are required. The device is housed in a
plastic housing featuring a compact design with a diameter of 105 mm and a height of 32 mm. Available color variants include RAL 9003 / RAL 9002 (white) and RAL 9005 (deep black), enabling visual integration into various interior designs. The protection rating IP30 safeguards against access to moving parts and solid foreign objects larger than 2.5 mm, but does not protect against water or dust. The operating environment is specified for temperatures from -5 °C to +45 °C and relative humidity from 5 % to 95 % (non-condensing). Storage is permitted in the range of -20 °C to +70 °C.
Applications
The sensor is designed for use in indoor environments, particularly in office buildings, schools, administrative buildings, or other spaces with continuous use. It detects the presence of people even with minimal movements, such as seated activity, enabling energy-efficient control of lighting and climate systems. Brightness measurement allows automatic adjustment of artificial lighting to daylight, achieving energy savings. Temperature and humidity measurement support the control of heating, ventilation, and air conditioning (HVAC) systems and enable calculation of the dew point. The function for monitoring the comfort zone according to DIN 1946 allows for an alert when measured values leave this zone.
Functions and Equipment in Detail
The sensor features a
passive infrared sensor (PIR) for presence detection with a detection angle of approximately 94° × 82° and a range of approximately 5 m. Brightness measurement is performed in the range of 0 Lux to 2000 Lux. Temperature is measured between 5 °C and +60 °C, relative humidity between 0 % and 100 %, and air pressure between 300 mbar and 1100 mbar. The integrated
PI controllers enable control of heating, cooling, and ventilation based on measured values. Ventilation control is humidity-based, allowing exhaust/ventilation (single-stage) or exhaust (single- or two-stage). Heating and cooling control can be single- or two-stage, using separate setpoints or a base setpoint. A summer compensation adjusts the setpoint according to outdoor temperature.
Technology Explained Simply
Communication takes place via the
KNX bus system on medium TP1-256, using the configuration mode S-Mode. The nominal voltage is 30 V DC SELV, with a maximum current draw of 20 mA. The maximum number of group addresses and assignments is 2000 each. Communication objects include 377 (TH-L-Pr) or 449 (AQS/TH-D L-Pr) elements. The bus connection terminal is designed for conductors with a diameter of 0.8 mm s, with a stripping length of 5 mm. After bus voltage recovery, it takes approximately 5 seconds before data can be received. Integrated logic functions include 8 AND and 8 OR gates, each with 4 inputs, usable for switching and logic inputs. Outputs can be configured as 1 bit or 2 x 8 bits. Additionally, 8 multifunction modules (calculators) are available, which can process input data through calculations, condition checks, or data point type conversions. An integrated actuator value comparator enables output of minimum, maximum, or average values from up to 5 received values.
Compatibility and Accessories
The sensor is designed for integration into KNX systems and can communicate with other KNX devices. Configuration is performed via the KNX software ETS. Measured values can be combined with external values to calculate mixed values such as room average values. The proportions of internal and external measured values are adjustable in percentage terms. The delivery includes the sensor for ceiling mounting, a data sheet with installation instructions (in German, English, French, Italian, Spanish), as well as product and manual files available for download in the same languages.
Mounting and Installation
Mounting is performed on the ceiling, where the device is inserted into the corresponding mounting element. Installation requires connection to the KNX bus network via the terminal. Electrical connection is made via the KNX bus medium, with power supply via the bus cable (PoE). Installation should be carried out according to the instructions in the data sheet and in accordance with KNX standards.
Operational Advantages
The sensor enables precise and automated control of lighting and climate systems, achieving energy savings and improved room quality. Integrated logic and control functions reduce the need for additional control devices. Mixed value calculation allows accurate representation of room conditions, even when multiple sensors are distributed in the room. The warning function when leaving the comfort zone according to DIN 1946 supports room quality monitoring. Configuration via ETS allows flexible adaptation to different requirements.