Elsner 30119, EAN: 4051996301196

Elsner 30119 ball joint 64 mm for weather station

Installation > Home Automation > EIB material

Elsner 30119 ball joint 64 mm for weather station

Lieske Part No. 626206
Mfg Part No 30119
EAN-Code 4051996301196
Manufacturer Elsner
Here only 125,33 EUR
149,14 EUR incl. VAT

Further information for Elsner 30119 ball joint 64 mm for weather station

General
ColourWhite RAL 9003 silk-matt
Joints1 ball joint 25°
Total lengthca. 64 mm
Scope of deliverybracket with wall and weather station plate, 2× hex cap screw M4x20 stainless steel (for Vari), 2× hex cap screw M4x25 stainless steel (for P04/Suntracer sl), 2× hex cap screw M4x8 stainless steel (for P03/Solexa/Suntracer), 2× washer DIN125 4,3 stainless steel, data sheet with installation instructions (German, English, French, Italian, Spanish)
Technical data
ColourPowder-coated white RAL 9003 satin-matt
Joints1 ball joint 25°
Total lengthca. 64 mm
Weightca. 152 g
The Elsner 30119 bracket is a mountable accessory for weather stations and sensors in the field of home automation. It enables flexible wall mounting and is specifically used for integration into KNX- and RS485-based systems. The bracket features a single ball joint, allowing swivel positioning of connected weather stations, ensuring optimal alignment according to environmental conditions such as sunlight exposure or wind direction.

Applications
This bracket is designed for a wide range of weather stations and sensors used in intelligent building control systems. These include models such as the Windancer and Suntracer KNX series (including basic, GPS, sl, and light variants), sensors from the Vari KNX series, as well as weather stations for Solexa, Solexa II, Solexa Home, and Arexa control systems. It is also compatible with models such as P03-RS485, RS485 weather sensors, P03-Modbus, P04-RS485, P04i-GPS (for WS1/WS1000 Style control systems), and sensors from the P04 series. The application is in buildings with KNX or RS485 infrastructure, where precise weather data collection is required for controlling ventilation, heating, blinds, or sun protection systems.

Functions and Features in Detail
The bracket consists of a powder-coated metal enclosure in white (RAL 9003, satin finish) and is equipped with a ball joint allowing a 25° range of motion. The total length is approximately 64 mm, making it compact yet sufficiently long for secure mounting. The construction is designed for wall mounting and includes a mounting plate for the wall and a second plate for securing the weather station. The package includes various stainless steel hex cap screws (M4x8, M4x20, M4x25) and matching washers (DIN 125 4,3), selected according to the connected weather station. A datasheet with installation instructions in German, English, French, Italian, and Spanish is also included.

Technology Explained Simply
The ball joint enables swivel mounting, allowing optimal alignment of the weather station. The 25° range of motion is sufficient to adjust the sensor position according to specific environmental conditions without compromising mechanical stability. The powder-coated surface in RAL 9003 satin finish provides corrosion-resistant and aesthetically pleasing protection, suitable for indoor use. The stainless steel screws ensure durable, rust-free fastening, even in high humidity conditions.

Compatibility and Accessories
The bracket is specifically developed for the mentioned weather stations and sensors used in KNX and RS485 systems. Compatibility includes both classic models such as P03-RS485 and modern variants like Suntracer KNX sl or P04i-GPS. Installation is done using the included screws and washers, with screw length selection varying depending on the device type. The included instruction manual supports correct installation and connection of the weather stations.

Installation and Mounting
Installation is performed on a suitable wall surface, where the mounting plate is secured using the included stainless steel screws. The second plate is attached to the weather station and then fastened to the bracket. The correct screw length (M4x8, M4x20, or M4x25) is selected based on the device type, with guidance provided in the included manual. Installation requires tools but no special skills. The weather station’s positioning is adjusted via the ball joint to achieve optimal alignment.

Operational Advantages
The bracket provides a stable and flexible mounting solution for weather stations used in intelligent building systems. The swivel alignment enables precise data collection, which is essential for controlling heating, ventilation, and sun protection systems. The use of stainless steel screws and a powder-coated surface ensures high corrosion resistance and long service life. The multilingual instruction manual included in the package simplifies installation for technicians from various countries.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/626206
qrcode für Elsner 30119 ball joint 64 mm for weather station