| Evaluation unit |
| Housing | Plastic |
| Mounting | Built-in |
| Dimensions (W × H × D) | 38 mm x 47 mm x 24 mm |
| Ambient temperature | 25…+55°C |
| rF (relative humidity) non-condensing | 0...95 % |
| Storage temperature | 30…+70°C |
| Over voltage category | III |
| Pollution degree | 2 |
| Connection terminal sensor solid/flexible | 0.14…1.5 mm² |
| Sensor terminal with ferrule | 0.25…0.5 mm² |
| Power supply |
| Voltage | 11…28 V DC |
| Electricity consumption | ≤ 35 mA |
| Conductor cross-section rigid/flexible | 0.14…1.5 mm² |
| Conductor cross-section with ferrule | 0.25…0.5 mm² |
| Sensor |
| Sensor sleeve | Metal |
| Degree of protection | IP67 |
| Sensor housing length | 20 mm |
| Diameter sensor housing | 6 mm |
| Cable length [extendable up to] | 3 m [10 m] |
| Conductor cross section | 2 x 0.25 mm² |
| Measuring range | 30…+130°C |
| Accuracy at +25°C housing temperature of evaluation electronics, sensor temperature ±0°C | ± 1.0°C |
| Accuracy at +25°C housing temperature of evaluation electronics, sensor temperature -30…+25°C | ± 1.5°C |
| Accuracy at +25°C housing temperature of evaluation electronics, sensor temperature -30…+70°C | ± 2.5°C |
| Accuracy at +25°C housing temperature of evaluation electronics, sensor temperature -30…+130°C | ± 4.0°C |
| Wireless |
| Frequency range | 868.0...868.6 MHz |
| Transmitting power | ≤ 10 mW |
The Elsner temperature sensor type 20552, designated as WGT, is a wireless temperature sensor for integration into home automation systems, particularly compatible with the WS1 and WS1000 Color, Style, and Connect controllers. The device consists of an evaluation unit and a separate sensor probe connected via a flexible cable. The evaluation electronics process the signal and transmit the measured temperature values wirelessly to the central control unit. Installation takes place in non-visible areas, for example in a device box, allowing the unit to be discreetly integrated.
Applications
The sensor is designed for use in both indoor and outdoor environments. The sensor probe can be used as a plug-in or surface-mounted probe, enabling flexible mounting on various surfaces. The IP67 protection rating of the probe housing ensures dust- and water-tight sealing, allowing the sensor to remain operational even under harsh environmental conditions, such as outdoors or in damp rooms. The operating temperature of the evaluation unit ranges from 25 °C to +55 °C, with a storage temperature up to +70 °C.
Functions and Equipment in Detail
The temperature sensor measures temperatures in the range of -30 °C to +130 °C. Accuracy varies depending on the measurement range: at an ambient temperature of the evaluation electronics of +25 °C, accuracy is ±1.0 °C at a sensor temperature of ±0 °C, ±1.5 °C in the range -30 °C to +25 °C, ±2.5 °C in the range -30 °C to +70 °C, and ±4.0 °C across the entire measurement range -30 °C to +130 °C. The metal sensor housing has a diameter of 6 mm and a length of 20 mm. The cable between the probe and the evaluation unit has a standard length of 3 m and can be extended up to 10 m. The conductor cross-section is 2 x 0.25 mm².
Technology Explained Simply
The evaluation unit is powered by a voltage of 11 to 28 V DC, with a maximum current consumption of 35 mA. Power supply can, for example, be provided via a multifunction input of the controller. Wireless communication operates in the frequency range of 868.0 to 868.6 MHz with a transmission power of up to 10 mW. The connection terminals for the sensor support conductor cross-sections of 0.14 to 1.5 mm² (rigid/flexible) and 0.25 to 0.5 mm² when using wire end ferrules. The evaluation unit is housed in a plastic enclosure and designed for installation in standard installation boxes.
Compatibility and Accessories
The sensor is specifically developed for use with WS1 and WS1000 Color, Style, and Connect controllers. Multiple WGT sensors can be taught to a single controller, enabling decentralized temperature monitoring in different rooms. The device is supplied with evaluation electronics, sensor probe with cable, and a datasheet with installation instructions in multiple languages (German, English, French, Spanish, Italian).
Installation and Mounting
The evaluation unit is mounted in a non-visible area, for example in a device box. Mounting is done by insertion, with the unit dimensions being 38 mm (width) x 47 mm (height) x 24 mm (depth). The connection terminals allow connection with various conductor cross-sections, with the use of wire end ferrules specified for certain cross-sections.
Operational Advantages
The sensor offers flexible and robust temperature measurement with minimal installation effort. Wireless communication enables decentralized installation without additional wiring between the probe and the controller. The IP67 protection rating of the probe ensures reliability in damp or outdoor applications. The ability to integrate multiple sensors into a single controller supports the creation of complex room temperature control systems in intelligent building systems.