Elsner 20551, EAN: 4051996205517

Elsner 20551 thermo-hygrometer WGTH-UP alu

Elsner 20551 thermo-hygrometer WGTH-UP alu

Lieske Part No. 1114706
Mfg Part No 20551
EAN-Code 4051996205517
Manufacturer Elsner
Here only 154,03 EUR
183,30 EUR incl. VAT

Further information for Elsner 20551 thermo-hygrometer WGTH-UP alu

General
HousingPlastic (partially lacquered)
Colours [similar][RAL 9016], white glossy, aluminium matt
Degree of protectionIP20
Housing dimensions (W × H)55 mm × 55 mm
Installation depth15 mm
Base plate (W × H)71 mm × 71 mm
Weight total≈ 50 g
Ambient temperature5…+45°C
rF (relative humidity) non-condensing0...95 %
Storage temperature25...+70°C
Over voltage categoryIII
Pollution degree2
Power supply
Voltage11…28 V DC SELV
Electricity consumption≤ 35 mA
Connection rigid/flexible conductorsØ 0.6...0.8 mm
Connection stripping length5 mm
Sensors
Temperature measurement range5…+60°C
Humidity measurement range0...95 %
Wireless
Frequency range868.0...868.6 MHz
Transmitting power≤ 10 mW
The Elsner WGTH-UP, alu is a wireless indoor sensor for measuring temperature and relative humidity. It is specifically designed for integration into control systems of the product series WS1 Color/Style, WS1000 Color/Style, and KNX WS1000 Color/Style (from version 1.0). The sensor enables monitoring of room climate conditions and serves as an input module for intelligent building automation systems. The housing is made of plastic, partially lacquered, and is available in an aluminium-matt finish, which allows it to blend visually into existing switch rows. The housing dimensions are 55 mm × 55 mm, the mounting depth is 15 mm, and the mounting plate measures 71 mm × 71 mm. The total weight is approximately 50 g.

Applications

The sensor is intended for use in indoor environments where continuous monitoring of ambient temperature and relative humidity is required. It is suitable for residential and office buildings where intelligent climate control systems or alarm systems for humidity- or temperature-sensitive areas are used. The operating environment must have a temperature between 5 °C and +45 °C, with relative humidity up to 95 % (non-condensing). The storage temperature ranges from 25 °C to +70 °C. The IP20 protection rating safeguards against contact with moving parts and against solid foreign objects larger than 12.5 mm, but does not protect against water or dust.

Functions and Equipment in Detail

The sensor measures temperature in the range of 5 °C to +60 °C and relative humidity from 0 % to 95 %. The measurement data are transmitted wirelessly in the frequency range of 868.0 to 868.6 MHz, with a maximum transmission power of 10 mW. The evaluation electronics are integrated into the device, and the sensor probe is connected via a cable approximately 3 m in length. Power supply is provided via a voltage of 11 to 28 V DC SELV, with a maximum current consumption of 35 mA. The connection terminals are designed for solid and stranded conductors with a diameter of 0.6 to 0.8 mm, requiring a stripping length of 5 mm.

Technology Explained Simply

The wireless transmission in the 868 MHz band enables reliable communication within buildings without additional infrastructure. The low transmission power of ≤ 10 mW is sufficient for indoor use and complies with applicable EU standards for wireless devices. The SELV (Safety Extra Low Voltage) supply voltage ensures safe power supply without risk of electric shock. The overvoltage category III and pollution degree 2 indicate application in normal indoor environments where no extreme electrical or mechanical stresses occur.

Compatibility and Accessories

The sensor is compatible with control systems WS1 Color/Style, WS1000 Color/Style, and KNX WS1000 Color/Style (from version 1.0). It can be installed alternatively to the supplied frame into the existing switch row of the building to ensure a uniform design. The delivery includes the evaluation electronics, the sensor probe with approximately 3 m cable, and a datasheet with installation instructions in multiple languages (German, English, French, Italian, Spanish).

Mounting and Installation

Installation is carried out into a prepared device box with the specified dimensions. The connection terminals are designed for conductors with a diameter of 0.6 to 0.8 mm, requiring a stripping length of 5 mm. Mounting is done on the wall, and the sensor must be installed in an indoor environment with the specified environmental conditions. The instruction manual included in the delivery describes the steps for correct installation.

Advantages in Operation

The sensor provides reliable and continuous measurement of temperature and humidity in indoor environments. Wireless transmission enables flexible installation without additional cabling. Compatibility with various control systems facilitates integration into existing building automation systems. The low power consumption and SELV supply ensure safe and energy-efficient operation. The visual design in aluminium-matt finish allows seamless integration into interior fittings.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1114706
qrcode für Elsner 20551 thermo-hygrometer WGTH-UP alu