Elsner 20206, EAN: 4051996202066

Elsner 20206 power supply 24V DC 60W

Elsner 20206 power supply 24V DC 60W

Lieske Part No. 833830
Mfg Part No 20206
EAN-Code 4051996202066
Manufacturer Elsner
Here only 127,73 EUR
152,00 EUR incl. VAT

Further information for Elsner 20206 power supply 24V DC 60W

Electrical connection
Input voltage100...240 V AC ±10 % / 50-60 Hz
Input power consumption at 24 V output voltage and 240 V AC input voltage≈ 0.345 W
Screw terminals wire cross-section0.05...2.5 mm²
Output (adjustable)24...28 V DC, max. 2.5 A, 60 W
Minimum spacing between input and output cables100 mm
Output voltage tolerance under mains voltage fluctuations and load variations of 0-100%± 0.04 %
Efficiency92.5 % (240 V)
General
HousingPlastic
ColourGrey
Degree of protectionIP20
StandardsEN60335-1; EN62368-1; EN55032/B; EN55024; EN61000-6-2; EN61000-6-3; EN61000-3-2; EN61000-3-3; EN50581; RoHS
Dimensions (W × H × D)54 mm x 95 mm × 68.5 mm
Pitch units3
Weight total≈ 210 g
Ambient temperature5…+45°C
rH (relative humidity) (non-condensing)0...95%
Storage temperature25...+70°C
Over voltage categoryIII
Protection classII
Pollution degree2
The Elsner PS2500 is a 24 V DC power supply designed for use in home and building automation. It converts an input voltage of 100 to 240 V AC into a stable output voltage of 24 to 28 V DC, delivering a maximum power of 60 W at a current of up to 2.5 A. The device is designed for panel mounting and is suitable for applications requiring a reliable and constant DC voltage supply, for example for sensors, switching devices or controls in the field of building automation.

Applications
This power supply is designed for indoor use, where ambient temperatures range from 5 °C to +45 °C. Relative humidity may reach up to 95 %, provided no condensation occurs. Storage is permitted at temperatures between 25 °C and +70 °C. Due to its IP20 protection rating, the device is not suitable for outdoor use or in damp environments. It is intended for operation in electrical installations with overvoltage category III and pollution degree 2, which assumes use in normal indoor environments without special pollution risks.

Functions and Features in Detail
The device provides a constant output voltage, maintained within a tolerance of ± 0.04 % even with fluctuations in input voltage and load changes from 0 to 100 %. This ensures stable power supply even under variable load conditions. It is designed to operate safely under no-load conditions, meaning it can run without connected load without causing damage. No minimum load is required, simplifying installation and operation. The operational status is indicated by an LED, which lights up when voltage is present at the output. The input voltage range is 100 to 240 V AC at a frequency of 50 to 60 Hz, enabling worldwide use.

Technology Explained Simply
The power supply operates with a high efficiency of 92.5 % at an input voltage of 240 V AC, meaning the majority of the input electrical energy is converted into usable output power. No-load power consumption is approximately 0.345 W at 240 V AC input and 24 V DC output, enabling energy-efficient operation in standby mode. The output voltage is adjustable between 24 and 28 V DC, allowing adaptation to different devices. Screw terminals allow secure connection of conductors with a cross-section of 0.05 to 2.5 mm². A minimum distance of 100 mm between input and output cables must be maintained to avoid electrical interference.

Compatibility and Accessories
The power supply is designed for use in electrical installations complying with standards EN60335-1, EN62368-1, EN55032/B, EN55024, EN61000-6-2, EN61000-6-3, EN61000-3-2, EN61000-3-3, EN50581 and RoHS. It is designed for panel mounting and fits into standard mounting units (3 TE). It is used in conjunction with 24 V DC devices that do not exceed a maximum power consumption of 60 W. The mentioned standards ensure the safety, electromagnetic compatibility and environmental compatibility of the device.

Mounting and Installation
The device is mounted in a standard distribution box or enclosure construction, taking into account the specified 3 mounting units. Mounting is done using screws or clips, depending on the enclosure design. Cable connections are made via screw terminals, with the required cross-sections (0.05 to 2.5 mm²) to be observed. The minimum distance between input and output cables (100 mm) must be maintained to ensure safe and interference-free installation.

Operational Advantages
The high stability of the output voltage (± 0.04 %) ensures reliable power supply for sensitive electronic devices. The no-load capability and independence from a minimum load simplify installation and reduce system planning complexity. The high efficiency of 92.5 % and low no-load power consumption of approximately 0.345 W contribute to energy efficiency. The LED indicator allows for quick visual verification of operational status. The device is compact (54 mm × 95 mm × 68.5 mm) and lightweight (approx. 210 g), facilitating mounting and placement in confined enclosures. Compliance with the specified standards ensures safety and functionality during operation.

Protection Class and Safety
The device complies with protection class II, meaning it can operate without a protective earth conductor, as it is protected by double or reinforced insulation. Overvoltage category III and pollution degree 2 are intended for use in normal indoor environments. Compliance with standards EN62368-1 and EN60335-1 ensures electrical safety and compatibility in electrical installations.

Enclosure and Materials
The enclosure is made of plastic and is finished in grey. Dimensions are 54 mm (width) × 95 mm (height) × 68.5 mm (depth). The design is optimized for panel mounting, with the 3 mounting units enabling installation in standard distribution boxes. Weight is approximately 210 g, allowing for easy handling and mounting.

Compliance with Standards
The device meets the requirements of standards EN60335-1 (safety of household appliances), EN62368-1 (safety of audio/video and information and communication technology), EN55032/B (electromagnetic compatibility), EN55024 (immunity), EN61000-6-2 (immunity), EN61000-6-3 (emissions), EN61000-3-2 (harmonic current emissions), EN61000-3-3 (voltage fluctuations), EN50581 (materials in electrical and electronic equipment) and RoHS (restriction of use of certain hazardous substances). These standards ensure the safety, functionality and environmental compatibility of the device.

Operating Environment
The device is designed for an operating environment with ambient temperatures between 5 °C and +45 °C. Relative humidity may reach up to 95 %, provided no condensation occurs. Storage is permitted at temperatures between 25 °C and +70 °C. The operating environment must meet the requirements of overvoltage category III and pollution degree 2, which applies to normal indoor spaces.

Connection and Wiring
Input connections are made via screw terminals for conductor cross-sections of 0.05 to 2.5 mm². Output connections are also made via screw terminals. A minimum distance of 100 mm between input and output cables must be maintained to avoid electrical interference. The input voltage range is 100 to 240 V AC at a frequency of 50 to 60 Hz. The output voltage is adjustable between 24 and 28 V DC, with maximum power of 60 W at 2.5 A.

Energy Efficiency
The efficiency is 92.5 % at an input voltage of 240 V AC, indicating high efficiency in energy conversion. No-load power consumption is approximately 0.345 W at 240 V AC input and 24 V DC output, enabling energy-efficient operation in standby mode. These values contribute to reducing energy consumption and are particularly beneficial in systems operating continuously.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/833830
qrcode für Elsner 20206 power supply 24V DC 60W