| Electrical connection |
| Input voltage | 230 V AC ±10 % / 50-60 Hz |
| Input power consumption at 24 V output voltage and 230 V AC input voltage | ≈ 0.24 W |
| Output | 24 V DC, 150 W |
| Minimum spacing between input and output cables | 27mm |
| Output voltage tolerance under mains voltage fluctuations and load variations from 0-100% | ± 1 % |
| Efficiency | 95 % (230 V) |
| General |
| Housing | Plastic |
| Colour | Grey |
| Mounting | Rail mounting on DIN 43880 top hat rail in dry indoor areas in a suitable enclosure (distribution board), made of self-extinguishing material, in accordance with standard EN 60950 |
| Protection rating after installation in distribution board | IP20 |
| Standards | EN60335-1; EN62368-1; EN61558-1; EN55032/B; EN55024; EN61000-6-2; EN61000-6-3; EN61000-3-2; EN61000-3-3; EN50581; RoHS |
| Dimensions (W × H × D), 4 TE | ≈ 72mm x 93mm × 68.5mm |
| Minimum mounting clearance (above and below) | 40mm |
| Weight total | ≈ 220g |
| Ambient temperature | 5…+45°C |
| Ambient air humidity (rH) (non-condensing) | 0...95% |
| Storage temperature | 25...+70°C |
| Over voltage category | II |
| Protection class | II |
| Pollution degree | 2 |
The Elsner 24 V DC power supply, type 20204 (PS6250), is a rail-mounted device for converting 230 V AC into a constant 24 V DC output voltage. It is intended for use in dry indoor environments and is mounted in a suitable distribution housing on DIN 43880 top hat rail. The device is designed for a maximum power output of 150 W, corresponding to a current of 6.25 A. It is particularly suitable for supplying 24 V DC devices, including demanding loads such as drives, thanks to its high voltage stability.
Applications
This power supply is designed for use in industrial and technical installations where a reliable and stable direct voltage supply is required. Due to the high stability of the output voltage and its ability to maintain voltage within a tolerance of ±1 % even under load fluctuations between 0 and 100 %, it is suitable for applications requiring precise voltage regulation. The ability to operate under no-load conditions without requiring a minimum load expands its application range, allowing it to be used in systems with variable loads or intermittent operation.
Functions and Equipment in Detail
The device features an LED indicator that signals the operating status – it lights up when voltage is present at the output. The output voltage remains constant, regardless of fluctuations in input voltage or load changes. The power consumption in no-load mode is approximately 0.24 W, indicating low standby power loss. The output power of 150 W at 24 V DC corresponds to a maximum current supply of 6.25 A. The device is designed for no-load operation and does not require a minimum load, increasing operational flexibility.
Technology Explained Simply
The power supply converts alternating voltage (230 V AC) into direct voltage (24 V DC). The efficiency is 95 % at an input voltage of 230 V, meaning that 95 % of the input energy is converted into usable output power, while only 5 % is lost as heat. The input voltage can fluctuate by ±10 % (i.e., between 207 V and 253 V) without the output voltage falling outside the ±1 % tolerance. Power supply is via a network cable connected at the input side; the minimum distance between input and output cables is 27 mm to ensure electrical safety.
Compatibility and Accessories
The device is designed for rail mounting in distribution units and fits into a housing with 4 mounting units (TE). Dimensions are approximately 72 mm (width) × 93 mm (height) × 68.5 mm (depth). It is intended for installation in a housing made of self-extinguishing material complying with EN 60950. Mounting is done on top hat rail, enabling standardized installation in enclosures. The device is not intended for outdoor use or in damp environments, as the IP20 protection rating is only suitable for dry indoor areas.
Mounting and Installation
Mounting is done on top hat rail according to DIN 43880. A minimum clearance of 40 mm above and below the device must be maintained to ensure sufficient cooling. The housing is made of plastic and is grey painted. The ambient temperature should be between 5 °C and +45 °C, and the relative humidity (non-condensing) must not exceed 95 %. Storage temperature ranges from 25 °C to +70 °C. The device complies with standards EN60335-1, EN62368-1, EN61558-1, EN55032/B, EN55024, EN61000-6-2, EN61000-6-3, EN61000-3-2, EN61000-3-3, EN50581, and RoHS. The overvoltage category is II, protection class II, and pollution degree 2.
Operational Advantages
The high efficiency of 95 % ensures efficient energy conversion and reduces heat generation. The low no-load power consumption of approximately 0.24 W minimizes energy consumption in standby mode. The constant output voltage under load fluctuations and voltage changes ensures stable supply for sensitive devices. The ability to operate under no-load conditions without requiring a minimum load increases operational safety and flexibility. The LED indicator allows for quick visual verification of the operating status.