| Connection for power supply and drive output |
| Spring-loaded terminals rigid | 0.5 …1.5 mm² |
| Spring clamp stripping length | 10 mm |
| Spring clamp outer diameter wire | Ø ≤ 10 mm |
| General |
| Housing | Plastic |
| Colours | white/aluminium-coloured lacquered |
| Degree of protection | IP20 |
| Visible diagonal | 126 mm |
| Dimensions (W × H × D) | 107 mm × 112 mm × 14 mm |
| Weight total | ≈ 170 g |
| Ambient temperature | 0…+45°C |
| rF (relative humidity) non-condensing | 5...95 % |
| Storage temperature | 10...+50°C |
| Over voltage category | III |
| Protection class | II |
| Pollution degree | 2 |
| Colour | white/translucent |
| Mounting | Surface or mast mounting |
| Power supply |
| Voltage (battery) | 3.8 V DC |
| USB power supply | 5V / 400 mA |
| Voltage | 110 V AC / 60 Hz, 230 V AC / 60 Hz |
| Power consumption | ≤ 2.5 W |
| Normally open contact | Micro Contact (μ) |
| With integrated fuse | T 5.0 AH |
| Maximum motor load at drive output | 500VA (2.17A) |
| Direction reversal pause | 1 s |
| Sensors |
| Temperature measurement range | 0…+50°C |
| Wind measurement range | 0…35 m/s |
| Brightness measurement range | 0 Lux … 150 000 Lux |
| Wireless |
| Frequency range | 868.0...868.6 MHz |
| Transmitting power | ≤ 25 mW |
The Elsner Solexa II set (type 10150) is a wireless control system for home automation, consisting of a display and a weather station. The system enables automatic control of shading elements such as blinds, awnings, and roller shutters, as well as windows, lighting, heating, and gutter heating. Control is achieved via wireless connection with Elsner wireless actuators, allowing both manual operation and automated sequences based on environmental conditions such as brightness, temperature, wind, precipitation, and sun position. The control logic is stored locally within the device, without external data transmission, ensuring data sovereignty.
Applications
The Solexa II set is designed for intelligent control of residential and commercial buildings. It is suitable for shading automation, where blinds, awnings, and roller shutters are controlled based on brightness and sun position, taking into account movement delays, temperature locks, wind and rain alarms, and frost protection. Ventilation automation controls casement and sliding windows based on indoor temperature, considering outdoor temperature locks, wind, and frost alarms. Lighting automation switches lights based on outdoor brightness and time, with dimming levels also considered when using dimming modules. Heating automation controls single- or two-stage heating systems based on indoor temperature, with day/night differentiation and an integrated time switch. Gutter heating automation activates heating within a defined outdoor temperature range. Daily automation resets and short resets after manual operation can be set for all functions.
Functions and Equipment in Detail
The Solexa II display features a monochrome touch display with a visible diagonal of 126 mm, an integrated indoor temperature sensor, and a real-time clock. It is equipped with a built-in rechargeable battery, which can be charged via a USB charging port (5V / 400 mA). The display can be mounted on the wall or used as a mobile remote control. The Solexa II weather station measures brightness (0 Lux to 150,000 Lux), outdoor temperature (0…+50°C), wind speed (0…35 m/s), and detects precipitation. It includes a GPS receiver to determine date, time, and installation coordinates for calculating sun position. The weather station can connect to up to four displays and controls up to 16 wireless actuators as well as up to 32 control devices/sensors.
Technology Explained Simply
The wireless connection operates in the frequency range of 868.0 to 868.6 MHz with a transmission power of ≤ 25 mW. The weather station is equipped with an integrated motor control unit capable of controlling drives with a maximum motor load of 500 VA (2.17 A). Power supply is via 110 V AC / 60 Hz or 230 V AC / 60 Hz, with power consumption ≤ 2.5 W. The supply and drive output terminals use spring clamp terminals for cables with a cross-section of 0.5 to 1.5 mm², a stripping length of 10 mm, and an outer diameter ≤ 10 mm. The reverse direction pause is 1 second. The device is designed for an ambient temperature of 0 to +45 °C and relative humidity of 5 to 95 % (non-condensing). The protection rating is IP20, protection class II, pollution degree 2, and overvoltage category III. An integrated fuse type T 5.0 AH protects the power supply.
Compatibility and Accessories
The system is compatible with various Elsner wireless actuators: motor control units RF-MSG-ST, RF-MSG, RF-MSG-PF for shading and window drives, switching relays RF-Relais-ST, RF-Relais-UP for lighting and single-stage heating, dimmers RF-L UN-ST, RF-L LED-ST, RF-L-UP 1-10 V for dimmable lighting, and the heating module RF-HE-ST for two-stage heating. Suitable control devices and sensors include the remote control Remo 8, push buttons at the interface RF-B2-UP, the temperature sensor WGT, and the sensor WGTH-UP (without humidity measurement evaluation). The weather station can connect to up to four displays.
Installation and Mounting
Mounting is either surface-mounted or mast-mounted. The display is secured with a wall bracket included in the delivery. Installation requires connecting the weather station to the power supply (110 V AC / 60 Hz or 230 V AC / 60 Hz) and connecting the wireless actuators. The USB connection cable (0.5 m, USB-A to USB-B Micro) is used for charging the display. The terminal clamps are designed for cables with a cross-section of 0.5 to 1.5 mm². Mounting is performed in an environment with an ambient temperature of 0 to +45 °C and relative humidity of 5 to 95 % (non-condensing). Storage temperature is 10 to +50 °C.
Operational Advantages
The system provides decentralized, locally executed control logic without external data connection, ensuring data protection and data sovereignty. Operation is performed directly on the display, with all settings, displays, and measured values available locally. The integrated weather station captures multiple environmental parameters used for intelligent automation functions. Support for up to 16 actuators and 32 sensors enables comprehensive control. The 1-second reverse direction pause prevents unwanted movements. The integrated fuse protects the power supply. The USB charging port enables mobile use of the display. Mounting is flexible, either as a wall-mounted unit or as a mobile remote control. System compatibility with various Elsner wireless actuators and sensors allows modular expansion.
Delivery Contents
The set includes the Solexa II display with wall bracket, four wall plugs (4 × 20 mm), four countersunk screws (3 × 25 mm), a USB connection cable (0.5 m, USB-A to USB-B Micro), the Solexa II weather station, and a manual (German, English, French, Dutch) available as a download, along with a datasheet containing installation instructions.