Elsner 10144, EAN: 4051996101444

Elsner 10144 display white/aluminium

Elsner 10144 display white/aluminium

Lieske Part No. 688191
Mfg Part No 10144
EAN-Code 4051996101444
Manufacturer Elsner
Here only 299,37 EUR
356,25 EUR incl. VAT

Further information for Elsner 10144 display white/aluminium

Connection for power supply and drive output
Spring-loaded terminals rigid0.5 …1.5 mm²
Spring clamp stripping length10 mm
Spring clamp outer diameter wireØ ≤ 10 mm
General
HousingPlastic
Colourswhite/aluminium-coloured lacquered
Degree of protectionIP20
Visible diagonal126 mm
Dimensions (W × H × D)107 mm × 112 mm × 14 mm
Weight total≈ 170 g
Ambient temperature0…+45°C
rF (relative humidity) non-condensing5...95 %
Storage temperature10...+50°C
Over voltage categoryIII
Protection classII
Pollution degree2
Colourwhite/translucent
MountingSurface or mast mounting
Power supply
Voltage (battery)3.8 V DC
USB power supply5V / 400 mA
Voltage110 V AC / 60 Hz, 230 V AC / 60 Hz
Power consumption≤ 2.5 W
Normally open contactMicro Contact (μ)
With integrated fuseT 5.0 AH
Maximum motor load at drive output500VA (2.17A)
Direction reversal pause1 s
Sensors
Temperature measurement range0…+50°C
Wind measurement range0…35 m/s
Brightness measurement range0 Lux … 150 000 Lux
Wireless
Frequency range868.0...868.6 MHz
Transmitting power≤ 25 mW
The Elsner Solexa II display is a wireless control element with an integrated monochrome touch display, serving as an additional control unit for the Solexa II system. It enables wireless control of shading systems and features a built-in battery, which is charged via a USB socket. The device is designed for indoor use and can either be wall-mounted or used as a mobile remote control. The surface is white/translucent, the housing is made of plastic and is finished in white/aluminium-coloured lacquer. The IP20 protection rating safeguards against contact with conductive objects and against solid foreign bodies larger than 12.5 mm, but does not protect against water or dust. The visible diagonal of the display is 126 mm, the device dimensions are 107 mm (width) × 112 mm (height) × 14 mm (depth), and the total weight is approximately 170 g.

Applications
This display is intended for use in buildings where flexible control of shading systems is required. It is particularly suitable for residential and office buildings, where operation from various locations within the building is desired. The option to mount the device permanently on the wall or use it mobilely offers flexibility in placement. The operating ambient temperature ranges from 0 °C to +45 °C, the relative humidity must not be condensing and is between 5 and 95 %. The storage temperature ranges from 10 °C to +50 °C.

Functions and Equipment in Detail
The device features a touch display for operating the shading system. It is equipped with an internal temperature sensor measuring temperatures from 0 °C to +50 °C. Additionally, a real-time clock is integrated, enabling time-dependent control. The wireless connection operates in the frequency range of 868.0 to 868.6 MHz with a maximum transmission power of 25 mW. The wireless transmission is carried out via an 868-MHz system, designed for reliable communication indoors. The device can be charged via a USB socket; the battery voltage is 3.8 V DC. The USB power supply delivers 5 V at 400 mA.

Technology Explained Simply
Control is performed wirelessly, with the device acting as both receiver and control unit. The integrated real-time clock allows programming of time schedules that function independently of external clocks or networks. The temperature sensor detects indoor ambient temperature, which is useful for controlling shading systems based on room temperature. The USB charging function enables operation without being connected to mains power, and the battery does not need to be replaced during operation. Spring-cage terminals allow secure connections for conductors with a cross-section of 0.5 to 1.5 mm², with a stripping length of 10 mm and a maximum outer diameter of the conductor of 10 mm.

Compatibility and Accessories
The display is specifically developed for the Solexa II system and complements existing wireless controls. It is compatible with the wireless frequencies and protocols of the Solexa II system. The delivery includes the display with wall bracket, four plugs (4 × 20 mm), four countersunk screws (3 × 25 mm), a USB connection cable (0.5 m, USB-A to USB-B Micro), as well as a manual and a datasheet with installation instructions in German, English, French, and Dutch available as a download. Connection to the control unit is wireless, requiring no additional cables or adapters.

Installation and Mounting
Mounting is either surface-mounted on the wall using the included bracket and screws, or as a mobile remote control. Wall mounting requires securing the bracket to the wall, with plugs and screws included in the delivery. Positioning is flexible, as the device can also be used as a handheld unit without mounting. Installation requires no additional tools, as spring-cage terminals allow easy connection of conductors. The maximum motor load at the drive output is 500 VA (2.17 A), and the reverse direction pause is 1 second.

Operational Advantages
The device offers simple and intuitive operation via the touch display. The combination of fixed mounting and mobile use enables flexible control from various locations. The integrated real-time clock and temperature sensor extend the functionality of the control, enabling automated processes and reactive control. The wireless connection in the 868-MHz band ensures reliable communication indoors. The USB charging function provides independent power supply, allowing the device to continue operating even during a power outage. The power consumption is a maximum of 2.5 W, enabling energy-efficient use. The integrated fuse (T 5.0 AH) protects the device against overloads.

Protection Class and Safety
The device is designed to protection class II, meaning it has double or reinforced insulation and does not require a protective earth connection. The overvoltage category III and pollution degree 2 indicate use in indoor environments where there are no high overvoltage risks and no heavily contaminated environments. Power supply is via 110 V AC / 60 Hz or 230 V AC / 60 Hz, with power consumption ≤ 2.5 W. The switch contact is designed as a Micro Contact (μ), enabling a compact and reliable switching function.

Sensors and Measurement Ranges
The device features sensors for measuring temperature, wind, and brightness. The temperature sensor measures in the range of 0 °C to +50 °C, with an additional measurement range of 40 °C to +80 °C specified. Wind measurement is in the range of 0 to 35 m/s, and brightness measurement is in the range of 0 Lux to 150,000 Lux.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/688191
qrcode für Elsner 10144 display white/aluminium