Further information for EFB EK519.1,8 Cold Equipment Extension C20-C19 1.8m black
General
Connection 1
Cold appliance plug IEC60320/C20
Connection 2
Cold appliance socket IEC60320/C19
Nominal voltage
250 V
Nominal current
16 A
Number of cores
3
Material outer sheath
PVC
Temperature resistance
0 – 70 °C
Outer sheath colour
Black
Approval
VDE tested
Protective conductor
Oil resistant according to EN 60811-2-1
With cord switch
Spiralized cable
This power cable from EFB Elektronik, type EK519.1,8, is a connection cable for cold appliances with a length of 1.8 metres. It connects a cold appliance plug IEC60320/C20 to a cold appliance socket IEC60320/C19 and is designed for use in IT infrastructures, server rooms and other installations with high power requirements. The connectors are internationally standardised and enable a safe and reliable power supply for devices with high power demands. The cable is VDE-tested, confirming compliance with safety standards for electrical equipment.
Cold appliance plug and cold appliance socket are specifically developed for use in server and network environments, where high current loads and a stable connection are required. The C20 plug and C19 socket are widely used in the IT and data processing industry and enable a direct connection between power supply units (e.g. UPS systems) and servers, switches or other devices. The C19 socket is straight, ensuring a secure and stable connection. A special note: The cold appliance socket is not equipped with bevelled corners, which must be considered during installation and cabling to avoid incorrect connections.
Technology explained clearly: The cable consists of three conductors, one of which serves as a protective earth conductor to minimise electrical hazards in the event of a fault. The sheathing material is PVC, designed for a temperature resistance of 0 to 70 °C. The rated voltage is 250 V, and the rated current is 16 A, sufficient for powering high-performance IT devices. The cable is not coiled but laid straight, enabling clear and organised cabling. It is not oil-resistant according to EN 60811-2-1, meaning it is not suitable for environments with direct oil contact. A cord switch is not integrated, so power supply must be controlled via the socket or the device itself.
Compatibility and accessories: The cable is compatible with all devices featuring a C19 power input, such as servers, network switches, UPS systems or other IT infrastructure components. As accessories, our range includes cable organisers, spiral and flexible cable ties, as well as Velcro tape in various lengths and widths, which can be used for better organisation and routing of cables in server rooms. These accessories support structured and safe cabling, without being directly connected to the cable.
Installation and mounting: Installation is carried out by simply inserting the C20 plug into a C19 socket, for example on a UPS, and connecting the C19 socket on the cable to the C19 input socket of the device to be powered. The straight design of the socket facilitates installation, especially in tight racks or limited spaces. Cabling should be arranged to avoid any mechanical stress on the cable, ensuring long service life and safe operation.
Operational advantages: The cable provides a reliable power supply for high-performance IT devices. VDE certification and the use of international standards (IEC60320) guarantee high safety and quality standards. Clear labelling and the specific shape of the socket prevent incorrect connections. The length of 1.8 m provides sufficient flexibility for cabling in standard 48,3 cm ( 19 inch ) racks and similar environments. The black colour blends visually into most server and IT environments.