EdgeCore ECS-4810-28TS

EdgeCore ECS-4810-28TS switch 24+4+1 stackable

Networks > Switches > Miscellaneous

EdgeCore ECS-4810-28TS switch 24+4+1 stackable

Lieske Part No. 2118365
Mfg Part No ECS-4810-28TS
EAN-Code
Manufacturer EdgeCore
Here only 344,28 EUR
409,69 EUR incl. VAT

Further information for EdgeCore ECS-4810-28TS switch 24+4+1 stackable

General
Number of RJ45 ports24
Number of Combo Ports4
Number of console ports1
Data rate RJ45 ports10/100/1000 Mbps
Data rate combo ports100/1000 Mbps
Maximum stacking quantity16
Management interfacesCLI (Telnet), Web, SNMP
Supported protocolsSpanning Tree, VLAN (Q-in-Q), LACP, IGMP Snooping, IPv6, QoS, RADIUS, TACACS+, SSH, HTTPS, SSL
Current supplyInternal power supply
Stacking capabilityYes
Power SavingYes
The EdgeCore ECS-4810-28TS is a 24+4+1-port stackable Gigabit switch designed for use in medium to large network infrastructures. The device features 24 RJ45 ports with a data rate of 10/100/1000 Mbps, supplemented by four combo ports that can be used either as RJ45 connections or as SFP slots for fibre modules. An additional RS232 console port enables direct configuration and maintenance of the switch via a serial connection. The devices are designed for networks requiring central management, high availability, and scalable performance.

Applications

The switch is particularly suitable for enterprise networks requiring a flexible and expandable network architecture. Support for stacking with up to 16 devices allows multiple switches to be connected into a logical unit, simplifying network management and increasing bandwidth between devices. Integrated support for VLAN (Q-in-Q) and IGMP Snooping makes the device suitable for environments with multiple network segments and multicast traffic, such as those found in video transmissions or Voice-over-IP applications.

Functions and Features in Detail

The ECS-4810-28TS offers a comprehensive range of functions for network management. Configuration is performed via a CLI (Command Line Interface) over Telnet, through a web interface, and via SNMP (Simple Network Management Protocol). Support for Spanning Tree Protocol (STP) prevents loops in the network and ensures a stable topology. LACP (Link Aggregation Control Protocol) enables bundling of multiple physical connections into a single logical connection, increasing bandwidth and creating redundancy. QoS (Quality of Service) allows prioritisation of network traffic to protect critical applications such as VoIP or video streaming from delays.

Technology Explained Simply

The 24 RJ45 ports support Gigabit Ethernet (1000 Mbps) and are therefore suitable for connecting workstations, printers, or other end devices. The four combo ports offer the flexibility to operate either with a standard network cable (RJ45) or with an SFP module (e.g. for single-mode or multi-mode fibre), enabling connections over longer distances or in environments with high interference. The RS232 console interface is used for local configuration and is particularly useful during initial setup or recovery operations when no network connection is available. Power supply is provided by an internal power unit designed for operation in standard network environments.

Compatibility and Accessories

The switch is designed for use in a stacking system, where up to 16 devices can be connected. The stacking function enables central management and higher bandwidth between switches. Support for IPv6 and protocols such as RADIUS, TACACS+, SSH, HTTPS, and SSL ensures authentication and encryption of network connections. The Power Saving function reduces energy consumption when certain ports are inactive, contributing to energy efficiency particularly in larger networks.

Mounting and Installation

The switch is designed for use in a 19-inch rack and can be installed in standard rack systems. Installation is carried out using the integrated mounting holes and screws. Configuration is performed via the mentioned management interfaces, with the web interface providing a graphical user interface accessible even to less experienced administrators. The stacking connection is made via dedicated stacking ports integrated into the device.

Advantages in Operation

The combination of high port density, stacking capability, and comprehensive management feature set makes the ECS-4810-28TS a powerful device for mid-sized and larger enterprises. Support for VLANs and QoS enables precise control of network traffic, while security protocols such as SSH and SSL protect data transmission. The Power Saving function contributes to reducing energy consumption, which is particularly relevant in large networks. The integrated RS232 console interface provides a reliable means for local maintenance and configuration, even if the network fails.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2118365
qrcode für EdgeCore ECS-4810-28TS switch 24+4+1 stackable