Eaton 199218, EAN: 4015081973026

Moeller 199218 DILA-22(24VDC)-PI auxiliary contactor 24 VDC 2 S 2 Ö

Industrial Material > Industrial relays and contactors > Contactors

Moeller 199218 DILA-22(24VDC)-PI auxiliary contactor 24 VDC 2 S 2 Ö

Lieske Part No. 2050513
Mfg Part No 199218
EAN-Code 4015081973026
Manufacturer Eaton
Here only 64,17 EUR
76,36 EUR incl. VAT

Further information for Moeller 199218 DILA-22(24VDC)-PI auxiliary contactor 24 VDC 2 S 2 Ö

General
Product typeAuxiliary contactor
ManufacturerEaton
Actuation voltage24 V DC
Type of currentDC operation
Connection systemPush-in terminals
Contacts Normally open (NO)2 S
Contacts Normally closed (NC)2 O
Rated operational current AC-154 A
Voltage range AC-15220 V, 230 V, 240 V, 380 V, 400 V, 415 V
Degree of protectionIP20
Combinable withDILA-XHI(V).-PI
Code number22E
Contact numbersaccording to EN 50011
Coil terminal markingsin accordance with EN 50005
The Eaton DILA-22(24VDC)-PI is an auxiliary contactor from the DILA relay series, designed for use in industrial control systems. It serves as a base unit with positive operating contacts and is designed for actuation with 24 V DC voltage. The connection technology uses push-in terminals, enabling quick and secure connection of wires without requiring additional tools. The device features two close contacts (2 S) and two open contacts (2 O), making it suitable for various switching functions in control and protection circuits. Contact numbers comply with standard EN 50011, and markings on the coil terminals follow standard EN 50005, ensuring uniform and clear labeling.

Auxiliary contactor is the product type, specifically developed to support main power switches or relays in control circuits. It performs auxiliary functions such as signaling switching states, triggering alarm signals, or controlling secondary functions in a system. Actuation is via a 24 V DC voltage, which is a standard value in industrial automation, particularly in control systems with PLCs or SPS systems.

Push-in terminals enable quick and reliable wire connections. The terminals are designed so that the wire is simply inserted into the terminal and secured by a spring mechanism. This reduces installation time and minimizes wiring errors. The terminals are designed for industrial environments and ensure a stable electrical connection.

The protection rating IP20 means the device is protected against contact with fingers and against solid foreign objects larger than 12.5 mm. It is not waterproof and not intended for outdoor use or in damp environments. Protection rating IP20 is typical for devices mounted in enclosed enclosures or in dry indoor spaces.

The device is rated for a nominal operating current AC-15 of 4 A, regardless of voltage level (220 V, 230 V, 240 V or 380 V, 400 V, 415 V). This value refers to the maximum permissible current load on the contacts under alternating voltage and is critical for selecting the device based on the load to be switched. The contacts are designed for switching loads in control and auxiliary current circuits, not for main power applications.

Combinable with auxiliary switch module DILA-XHI(V).-PI – the device can be expanded with additional auxiliary switch modules to increase the number of contacts or integrate special functions such as latch release or time delay. The combination is achieved through mechanical and electrical connection of the modules, with code number 22E identifying the specific combination version.

In industrial plants, the DILA-22(24VDC)-PI is frequently used in control systems, where it serves as an auxiliary relay for signal transmission, status indication, or logic interconnection. It is compatible with other components of the DILA series, such as time modules, test cubes, or additional auxiliary switch modules, which are listed in the accessories section. Using these modules extends the functionality of the base unit and enables modular adaptation to specific requirements.

Installation is carried out in standard enclosures, where push-in terminals enable quick and secure wiring. The devices are designed for industrial environments without special conditions such as high humidity, dust, or aggressive chemicals. The operating voltage of 24 V DC is widely used in automation technology and allows easy integration into existing control systems.

In operation, the device is characterized by high reliability and low maintenance requirements. The contacts are designed for a high number of switching cycles, ensuring long service life and stable performance. The use of push-in terminals reduces installation error susceptibility and facilitates maintenance.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2050513
qrcode für Moeller 199218 DILA-22(24VDC)-PI auxiliary contactor 24 VDC 2 S 2 Ö