| Features |
| Circuit breaker type | Residual-current device |
| Breaking capacity | 10000 A |
| Number of poles | 4 |
| International Protection (IP) code | IP20 |
| Pollution degree | 2 |
| Operational conditions |
| Operating temperature (T-T) | -25 - 40 °C |
| Storage temperature (T-T) | -35 - 60 °C |
| Power |
| Rated current | 63 A |
| Rated voltage | 415 V |
| Weight & dimensions |
| Width | 70 mm |
| Depth | 70.5 mm |
| Height | 80 mm |
The residual current circuit breaker FRCDM-63/4/003-G/B from Eaton is a 4-pole circuit breaker for industrial and extended commercial applications. It is designed for use in electrical distributions where high safety against dangerous fault currents is required. With a rated current of 63 A and a rated voltage of 415 V, it covers typical requirements in industrial and commercial environments. The breaker features a switching capacity of 10000 A, making it suitable for installations with high short-circuit currents, especially when combined with a pre-fuse.
Applications
The circuit breaker is designed for use in electrical installations that require high safety standards for fault current disconnection. It is particularly suitable for industrial environments, such as production plants, machine controls, or lighting systems in large halls. The 4-pole design enables protection of 3-phase systems with neutral conductor, which is common in many industrial distributions. The operating temperature range of -25 °C to 40 °C makes it suitable for outdoor installations or rooms with fluctuating temperatures, provided environmental conditions remain within these limits.
Functions and Equipment in Detail
The breaker is designed as a residual current circuit breaker (RCCB) and trips at a fault current of 0.03 A (30 mA). This value is typical for protection against dangerous touch voltages and meets personal protection requirements in many applications. The switching capacity of 10000 A (10 kA) ensures the breaker can safely disconnect even under high short-circuit currents, with the note “with pre-fuse kA” indicating that short-circuit resistance applies under the condition of a pre-installed fuse. The protection rating IP20 protects against finger contact and solid foreign objects, but not against splashing water or dust – therefore, it is intended for use in enclosed switchgear or indoor environments.
Technology Explained Simply
The breaker operates on the principle of residual current protection: it monitors current flow in all conductors (three phases and neutral conductor) and detects when current leaves the system, for example due to insulation failure or contact with earth. When a difference of 30 mA is detected between incoming and outgoing current, the breaker automatically trips. The 4-pole design ensures that all conductors, including the neutral conductor, are disconnected, providing complete isolation of the power supply. Dimensions of 70 mm (width), 70.5 mm (depth), and 80 mm (height) conform to the standard for modular installation in enclosures, enabling compact mounting.
Compatibility and Accessories
To extend functionality, various accessory modules can be used. These include the re-closing device Z-FW-LP (230 VAC) and the remote test module Z-FW/003 (0.03 A), which enables remote testing of the breaker. The remote control module Z-FW-MO allows the breaker to be operated remotely into ON, OFF, or TEST positions. Additionally, auxiliary switches (Z-HK) and trip signal switches (Z-NHK) are available to indicate the breaker’s status or integrate it into control systems. These modules expand the breaker’s application possibilities in complex automation systems.
Mounting and Installation
The breaker is designed for modular installation in standard switchgear. Its dimensions correspond to the 1-module format, enabling easy installation in existing switchgear. Mounting typically occurs in an enclosure, taking into account environmental conditions (temperature, pollution degree 2). Pollution degree 2 means the breaker is suitable for environments where no heavy contamination from solid dust or dirt occurs, but occasional contamination is possible.
Advantages in Operation
The breaker provides reliable disconnection at fault currents of 30 mA, ensuring high safety for personnel and equipment. The high switching capacity of 10000 A ensures safe operation even under high short-circuit currents. The 4-pole design enables protection of complete 3-phase systems, and the modular design allows flexible expansion with accessories. The operating temperature range of -25 °C to 40 °C makes it suitable for a wide range of operating conditions without requiring additional cooling or heating. The IP20 protection rating is sufficient for use in enclosed switchgear, provided the environment is not wet or dusty.
Residual current circuit breaker,
4-pole,
rated current 63 A,
switching capacity 10000 A,
IP20,
fault current 30 mA are the key features defining the breaker for its intended application. The combination of safety, reliability, and expandability makes it a suitable device for industrial and commercial distributions.