Eaton 115964, EAN: 4015081157044

Moeller 115964 M22-SWD-K11 sensor 2 positions changeover

Industrial Material > Automation > Industrial bus systems

Moeller 115964 M22-SWD-K11 sensor 2 positions changeover

Lieske Part No. 235507
Mfg Part No 115964
EAN-Code 4015081157044
Manufacturer Eaton
Here only 21,61 EUR
25,72 EUR incl. VAT

Further information for Moeller 115964 M22-SWD-K11 sensor 2 positions changeover

General
Product typefunctional component
ConnectionSmartWire-DT
MountingFront fastening
FunctionChangeover contact, 2 positions
The product M22-SWD-K11 from Eaton is a function element for use in industrial automation systems, specifically for integration into the SmartWire-DT bus system. It is a sensor element with two positions and changeover function, designed for front mounting on a control or switching unit. Connection is made via the SmartWire-DT protocol, enabling integration into existing bus-based control systems without requiring additional cabling for signal acquisition.

Applications
This function element is designed for use in industrial plants where status information from mechanical or electrical components is transmitted via a digital bus system. Typical applications include monitoring switching states, such as door open/close, positions of slides, or operating states of machine parts. Front mounting allows for compact installation directly on the control surface or front panel of an enclosure, simplifying installation in existing plants.

Functions and Equipment in Detail
The device features a changeover function with two positions, meaning it closes or opens an electrical contact depending on its state. This function is transmitted digitally via the SmartWire-DT network, allowing the control unit to detect the element’s state in real time. Front mounting is achieved using pre-defined mounting holes or mounting elements attached to the front of the switching unit. Connection to the SmartWire-DT system is made via a specific connector, ensuring communication with the central control unit.

Technology Explained Simply
The SmartWire-DT system is an industrial bus standard that enables communication between sensors, actuators, and the control unit via a single cable. The function element M22-SWD-K11 is an end device that digitally transmits status information. Communication occurs via a serial transmission protocol that aggregates signals from multiple devices over a common cable. Front mounting allows direct integration into the control surface, enabling signal acquisition without additional cabling.

Compatibility and Accessories
The device is specifically developed for use in the SmartWire-DT system and requires a compatible control unit. Suitable accessories include the Powerfeed module EU5C-SWD-PF1-1 and the Busrefresh module EU5C-SWD-PF2-1. The Powerfeed module supplies power to the bus cable, while the Busrefresh module stabilizes signal quality over longer distances. These modules are optional and required depending on the plant configuration.

Mounting and Installation
Mounting is performed by front mounting at the designated location, e.g., on the front panel of an enclosure or control console. Connection to the SmartWire-DT network is made via the integrated connector, which is connected to the bus cable. Configuration is done via the central control unit, with the exact procedure not described.

Advantages in Operation
Integrating the function element into a SmartWire-DT system reduces the number of required cable connections, as both data transmission and power supply occur over a single cable. Front mounting enables compact and clear installation, simplifying maintenance and diagnostics of the plant. Digital status transmission allows precise and reliable monitoring of the affected components.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/235507
qrcode für Moeller 115964 M22-SWD-K11 sensor 2 positions changeover