Further information for Moeller 095806 T0-1-15421/E group selector switch
Features
Type
Toggle switch
Number of poles
1P
Housing material
Plastic
Product colour
Black, Metallic
International Protection (IP) code
IP65
Built-in display
Operational conditions
Operating temperature (T-T)
-25 - 50 °C
Weight & dimensions
Width
48 mm
Height
48 mm
The article from Eaton, type T0-1-15421/E, is a toggle switch from the control switch product range, specifically designed as a group selector switch for industrial applications. It features a black-metallic lacquered knob and a front plate marked 2-0-1, visually indicating the three switching positions (Position 2, 0, Position 1). The switch is designed for flush mounting and is used in electrical control systems to safely disconnect loads or switch between different operating states. It complies with standards IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, and UL and is classified as a load disconnector according to IEC/EN 60947-3, legitimizing its use in industrial control and protection circuits.
Applications
The switch is suitable for use in industrial environments, particularly in systems requiring safe electrical energy disconnection, such as machine controls, drive technology, or process engineering. The protection rating IP65 ensures the device is dust-tight and protected against water jets from any direction, making it suitable for outdoor use or in humid production environments. The operating temperature range of -25 to +50 °C allows use in climatically diverse regions or environments with significant temperature fluctuations.
Functions and Equipment in Detail
The switch features 2 contacts and is configured as 1P (single-pole), meaning it switches one conductor (e.g., phase). The switching behavior is latching, i.e., positions are fixed by latching, ensuring the switch does not unintentionally move from the selected position. The switching angle is 45°, enabling clear and precise operation. The 0 position serves as the disconnect position, where the circuit is fully interrupted. The front plate marked 2-0-1 supports the operator’s visual orientation.
Technology Explained Simply
The rated continuous current is Iu = 20 A, indicating the maximum current the switch can carry continuously without overheating or damage. The rated operational power at AC-23A, 50–60 Hz, and 400 V is P = 5.5 kW, indicating the maximum power the switch can safely switch. The housing is made of plastic and is available in black and metallic colors. Dimensions are 48 mm width and 48 mm height, making it suitable for standard control panels with 48 mm module width. The front side is protected to IP65, ensuring high mechanical and electrical safety.
Compatibility and Accessories
Various accessories are available for this switch to extend its functionality. These include, for example, individual keys (e.g. ES-KMS(*)-T0), enabling authorized operation, or front plates such as the EMERGENCY STOP front plate (FS908GE-T0) or the front plate FS alu (FS-ALU980-T0), enhancing operational safety. Additional options include central mounting kits (EZ-T0), knob handles (KNB-RT-T0), plate carriers (ZFSX-T0), and mounting plate shields (MBS-I2), which optimize installation and operation depending on the application. Combining with cylinder lock locks (SVA-SOND-KMS(*)-T3) or key actuators (S(*)-T0) enables additional protection against unauthorized operation.
Mounting and Installation
The switch is designed for flush mounting and is installed in standard control panels with 48 mm module width. Mounting is typically done via screw fastening into pre-cut openings. The use of mounting aids such as mounting brackets (AB-CI-K4/5) or central mounting kits (EZ-T0) can simplify installation. Cable connections are made via integrated terminal clamps, and the use of clamp covers (H-P3) or neutral conductor clamps (K-CI-K5) may be appropriate depending on the connection configuration.
t Operational Advantages
The switch offers clear, latching operation with easily identifiable positions, enhancing operational safety. The IP65 protection rating protects against dust and splashing water, increasing service life and reliability in demanding environments. Compliance with IEC/EN 60947-3 and other standards ensures safety requirements are met in industrial installations. Compatibility with various accessories allows customized adaptation to specific requirements of individual systems.