| General |
| Degree of protection | IP20 |
| Actuation voltage | 230 V |
| Frequency | 50/60 Hz |
| Type of current | AC operation |
| Connection system | Screw terminals |
| Contact arrangement | 4 S |
| Rated operational current AC-15 220-240 V | 6 A |
| Rated operational current AC-15 380-415 V | 3 A |
| Thermal current Ith (50 °C, 1 pole open) | 10 A |
| Combination marking | 40E |
| Utilization | for .DILE |
| Contact numbers | according to EN 50011 |
| Standards | IEC/EN 60947, EN 60947-5-1, VDE 0660, UL, CSA |
The product is an auxiliary contactor of the DILER-40 series by Eaton, type 052725, specifically designed for use in industrial control systems. It is a mini-contactor with forced-guided contacts, used as an auxiliary contactor in electrical circuits to transmit signals or support switching operations. Operation is via alternating voltage of 230 V at a frequency of 50/60 Hz. Connection is made via screw terminals, ensuring a secure and mechanically stable connection. The protection rating IP20 prevents entry of solid foreign objects with a diameter greater than 12.5 mm and protects against contact with moving parts, but does not protect against water or dust. Contact numbering complies with standard EN 50011, enabling uniform identification of contacts in the circuit.
Auxiliary contactor is used here as an electrical switching device serving signal transmission in control and protection circuits. It is not designed for direct load switching, but for auxiliary functions such as actuating relays, signaling states, or connecting control lines. The design with
forced-guided contacts ensures reliable and precise switching performance, as the contacts are mechanically guided and cannot move unintentionally. This is particularly important in applications with high switching frequencies or in environments with mechanical vibrations.
Functions and equipment in detail include four normally open contacts (4S), meaning four contacts are open in the resting state and close when switching. Rated operational currents are defined according to voltage level: at 220 V, 230 V, and 240 V, the rated operational current AC-15 is 6 A; at 380 V, 400 V, and 415 V, it is 3 A. The conventional thermal current (Ith) at 50 °C with an open pole is 10 A. These values are relevant for circuit dimensioning and selection of associated wiring. The designation of the combination is 40E, identifying the specific configuration within the DILER series.
Technology explained simply shows that the device is designed for use with other DILER contactors, with the operating voltage of 230 V AC enabling control via a network or control system. Screw terminals provide a robust connection suitable for industrial applications. The IP20 protection rating is intended for indoor use, where no direct exposure to water or dust is expected. Contacts are numbered according to EN 50011, ensuring compliance with international standards for switching device identification.
Compatibility and accessories include a wide range of auxiliary switches and protection modules specifically developed for the DILER series. These include auxiliary switches such as 11DILE (1S1Oe), 20DILE (2S), 04DILE (4Oe), 40DILE (4S), 11DILEM (1S1Oe), 22DDILE (1fS1S1Oe1Oe1S), 13DILE (1S3Oe), 31DILE (3S1Oe), 22DILE (2S2Oe), 02DILE (2Oe), 02DILEM (2Oe), 22DILEM (2S2Oe), as well as protection modules such as VGDILE250 (varistor), VGDILE48 (varistor), RCDILE250 (RC protection circuit), RCDILE48 (RC protection circuit), MVDILE (mechanical interlock), and HDILE (sealing cap). These components can be used as needed to add functions such as signaling, protection, or mechanical interlocking.
Mounting and installation is carried out in the usual manner for contactors in enclosures. Screw terminals allow for simple and secure wiring. The device is used in conjunction with other DILER contactors, with the 230 V AC operating voltage enabling control via an external control system or network. Compliance with standards IEC/EN 60947, EN 60947-5-1, VDE 0660, UL, and CSA ensures safety and reliability in industrial applications.
Operational advantages include the reliability of forced-guided contacts, clear identification according to EN 50011, and compatibility with a wide range of accessories. Screw terminals ensure a stable connection, and the 230 V AC operating voltage enables easy integration into existing control systems. The IP20 protection rating is suitable for indoor installations where no special environmental conditions such as humidity or dust are present. Rated operational currents are designed for typical auxiliary switching applications, with values of 6 A at 230 V and 3 A at 400 V covering common loads.
Compliance with standards IEC/EN 60947, EN 60947-5-1, VDE 0660, UL, and CSA ensures the device meets international requirements for safety and functionality. Contact numbering according to EN 50011 simplifies circuit planning and maintenance, as designations are standardized. Use in conjunction with other DILER components enables modular and flexible system design.