| Technical data |
| Width | 22,5 mm |
| Type | UG 6951 |
| Variant |
| Approvals and Markings | UL-listed C/US, TÜV |
The Dold UG6951 CANopen is a fieldbus module for the modular safety system SAFEMASTER PRO. It serves as an interface for connecting the safety system to CANopen-based fieldbus networks and enables diagnostic and communication functions via the industrial bus. The device is designed for use in safety-critical applications and supports safety functions up to category PLe / Cat. 4 as well as SIL 3. Configuration is performed using the graphical software SAFEMASTER PRO Designer, simplifying project planning through drag & drop. Commissioning is time- and cost-saving, as wiring is reduced and space in the enclosure is saved.
Applications
This module is used in industrial plants where secure communication between the control unit and higher-level control systems is required. It is suitable for applications requiring diagnostic functions via the fieldbus, for example in machine and plant engineering. Connection is made via the support rail bus (IN-Rail Bus), which enables communication between SAFEMASTER PRO modules. The modules can be flexibly expanded, with up to 14 expansion modules connectable to the control unit.
Functions and Equipment in Detail
The UG6951 CANopen features status LEDs that enable comprehensive diagnostics and fault localization. Communication takes place via a 5-pole support rail bus, located at the rear of the modules. The modules are equipped with plug-in connection blocks, allowing for quick device replacement. The connection blocks are coded to ensure an unambiguous connection and increase mounting safety. Configuration is performed via a Mini USB port on the control unit, using the SAFEMASTER PRO Designer software.
Technology Explained Simply
The module enables the transmission of diagnostic and status information via the CANopen bus. It is not responsible for directly controlling safety functions, but serves exclusively for communication and diagnostics. Safety functions are implemented by the control unit UG 6911 and the expansion modules. The module width is 22.5 mm, enabling compact mounting on the support rail. Certifications UL-listed C/US and TÜV confirm compliance with applicable safety standards for use in North America and Europe.
Compatibility and Accessories
The module is part of the SAFEMASTER PRO system and is compatible with all other modules in the series, including the control unit UG 6911 and expansion modules such as input, output, and combined input/output modules. It can be combined with other fieldbus modules such as UG 6952 (PROFIBUS DP), UG 6954 (PROFINET), UG 6955 (Ethernet/IP), UG 6956 (EtherCAT), and UG 6957 (USB) to support different bus systems. Expansion is achieved via the support rail bus, enabling flexible and modular system design.
Mounting and Installation
Mounting is performed on a standard support rail (DIN rail). The module is simply snapped onto the rail and connected to other modules via the 5-pole support rail bus. The connection blocks are plug-in and allow for quick replacement. Configuration is performed via a PC using the SAFEMASTER PRO Designer software, connected to the Mini USB port on the control unit. Installation is possible without special tools.
Operational Advantages
The module reduces wiring in the enclosure and enables flexible expansion of the safety system. Diagnostic functions via the CANopen bus simplify maintenance and fault correction. The compact design with a width of 22.5 mm optimizes space requirements. The use of coded connection blocks increases mounting safety and prevents incorrect connections. Software-based configuration instead of mechanical wiring reduces commissioning time and lowers error susceptibility.