Dold 0063826, EAN: 4030641638269

Dold 0063826 UG6952 PROFIBUS DP fieldbus module

Dold 0063826 UG6952 PROFIBUS DP fieldbus module

Lieske Part No. 1001238
Mfg Part No 0063826
EAN-Code 4030641638269
Manufacturer Dold
Here only 1.082,73 EUR
1.288,45 EUR incl. VAT

Further information for Dold 0063826 UG6952 PROFIBUS DP fieldbus module

Technical data
Width22,5 mm
TypeUG 6952
Variant
Approvals and MarkingsUL-listed C/US, TÜV
The Dold UG6952 PROFIBUS DP is a fieldbus module for the modular safety system SAFEMASTER PRO. It serves as an interface for connecting the safety system to a PROFIBUS DP network, enabling the transmission of diagnostic and status information via the fieldbus. The device is designed for use in industrial safety applications certified up to safety category PLe / Cat. 4 and SIL 3. Communication takes place via the rear-mounted, 5-pole rail bus (IN-Rail Bus), which enables connection between SAFEMASTER PRO modules. The module is compact, with a width of 22.5 mm, allowing space-saving installation in an enclosure.

Applications

The UG6952 PROFIBUS DP is used in industrial plants where safe and monitored control of machines and processes is required. It is suitable for applications requiring monitoring of optoelectronic sensors, light grids, emergency stop buttons, safety mats, mechanical switches, two-hand controls, or shaft speeds. Connection to a PROFIBUS DP network enables integration into existing automation systems and transmission of diagnostic and status data to a higher-level control system or SCADA system.

Functions and Equipment in Detail

The module features status LEDs that enable comprehensive diagnostics and fault localization. The connection blocks are plug-in type, supporting quick replacement of the device in case of failure. Communication with the SAFEMASTER PRO system occurs via the IN-Rail Bus, without impairing the safety functions. Configuration is performed using the SAFEMASTER PRO Designer software, which allows project design via drag & drop using a graphical user interface. The software supports flexible expansion of the system with safe input and output modules.

Technology Explained Simply

The UG6952 PROFIBUS DP is a diagnostic module that enables communication between the SAFEMASTER PRO system and a PROFIBUS DP network. PROFIBUS DP is an industrial fieldbus standard used for fast data transmission between controllers and field devices. The module transmits status and fault information via the fieldbus without affecting the system’s safety functions. The width of 22.5 mm allows compact mounting on a support rail, saving space in the enclosure. The use of coded connection blocks increases installation safety, as they cannot be interchanged.

Communication between modules occurs via the IN-Rail Bus, which provides a 5-pole connection along the support rail. This enables easy system expansion by simply snapping additional modules onto the rail. Configuration is performed via a Mini-USB connection on the control unit UG 6911, allowing the software to flexibly adjust the safety function logic.

Compatibility and Accessories

The UG6952 PROFIBUS DP is part of the SAFEMASTER PRO series and is compatible with all other modules in this series, including the control unit UG 6911 and expansion modules such as UG 6912, UG 6913, UG 6916. It can be combined with other fieldbus modules such as UG 6951 (CANopen), UG 6954 (PROFINET), UG 6955 (Ethernet/IP), UG 6956 (EtherCAT), and UG 6957 (USB) to support different network environments. Expansion is achieved via the IN-Rail Bus, enabling flexible adaptation to specific requirements.

Mounting and Installation

The module is mounted on a standard support rail (DIN rail), with connection via the IN-Rail Bus. Installation is done by snapping the module onto the rail, creating a mechanically secure connection. The connection blocks are plug-in and allow for quick replacement in case of failure. Configuration is performed using the SAFEMASTER PRO Designer software, accessed via a Mini-USB connection on the control unit UG 6911. The software enables setting of safety logic and adaptation of system functions to the specific requirements of the plant.

Operational Advantages

The UG6952 PROFIBUS DP enables reduced wiring and significant space savings in the enclosure, as communication occurs via the IN-Rail Bus. Diagnostic functions via status LEDs and the fieldbus ensure fast fault localization. Software-based configuration reduces commissioning time and lowers costs. The system’s flexible expandability allows adaptation to growing requirements without requiring a complete redesign. The use of coded connection blocks increases installation safety and reduces errors during installation.

Approvals and Markings

The device is UL-listed C/US and carries TÜV approval, confirming compliance with relevant safety and quality standards. The approvals confirm suitability for use in safety applications up to PLe / Cat. 4 and SIL 3. The width of 22.5 mm is standardized and allows installation in standard enclosures. Communication via PROFIBUS DP follows applicable industry standards, ensuring interoperability with other devices.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001238
qrcode für Dold 0063826 UG6952 PROFIBUS DP fieldbus module