| Technical data |
| 2-channel safety outputs OSSD | 4 |
| Cat. / PL acc. to EN ISO 13849-1 | 4/e |
| SIL CL acc. to IEC/EN 62061 | 3 |
| SIL acc. to IEC/EN 62061 | 3 |
| Width | 22,5 mm |
| Type | UG 6912.04 |
| Variant |
| Contact equipping | 4 single-channel outputs (OSSD) - 4 or 8 status outputs |
| Approvals and Markings | UL-listed C/US, TÜV |
| Variant | 4 dual-channel outputs (OSSD) |
The Dold UG6912.04 is an output module for safe applications in industrial environments, specifically designed for use in the modular safety system SAFEMASTER PRO. It features 4 two-channel, safe semiconductor outputs (OSSD) and is designed for safety applications up to Performance Level e (PLe) according to EN ISO 13849-1 as well as SIL 3 according to IEC/EN 62061. The module width is 22.5 mm, enabling compact installation in an enclosure. The device is UL-listed C/US and TÜV-certified, confirming compliance with international safety standards.
Applications
This module is used in systems where safe control and monitoring of machine functions are required. Examples include monitoring of optoelectronic sensors, light grids, emergency stop buttons, safety mats, mechanical switches, or shaft speeds. It is suitable for applications requiring high safety integrity, such as in manufacturing, packaging technology, or automation technology.
Functions and Equipment in Detail
Each output has its own feedback circuit with individually configurable start conditions, enabling precise control and diagnostics. Status LEDs and two programmable alarm outputs support comprehensive fault localization and diagnostics. Configuration is performed using the graphical software SAFEMASTER PRO Designer, allowing project design via drag & drop. This reduces wiring and shortens commissioning time.
Technology Explained Simply
The OSSD outputs (Safe Output Signal Device) are specifically designed for safe applications and ensure that outputs are only activated when safety conditions are met. The two-channel structure means each output has two independent channels, monitored in parallel to detect malfunctions. Communication between modules is via the 5-pin rail bus (IN-Rail Bus), enabling easy system expansion. The plug-in terminal blocks allow for quick replacement of the device during maintenance or replacement.
Compatibility and Accessories
The module is part of the SAFEMASTER PRO system and can be combined with various expansion modules, including input and combination modules. It is compatible with the control unit UG 6911 and can be expanded via the IN-Rail Bus. Additionally, relay output modules such as UG 6912.14 and UG 6912.28 are available, which serve to extend the OSSDs with potential-free contacts. These modules are wired to the OSSD outputs, with total current requirements to be observed.
Mounting and Installation
Mounting is on a standard support rail (DIN rail). Communication between modules is achieved via the rear 5-pin rail bus (IN-Rail Bus). Configuration is performed via a Mini-USB connection to a PC using the SAFEMASTER PRO Designer software. The plug-in terminal blocks allow for quick replacement without additional tools.
Operational Advantages
The module reduces wiring in the enclosure and offers significant space savings due to its compact design with a width of 22.5 mm. The graphical configuration and comprehensive diagnostic functions simplify commissioning and maintenance. The flexible expandability via the IN-Rail Bus enables scalable system design. Integrated fault localization and programmable alarm outputs support machine maintenance and increase operational safety.