Dold 0063820, EAN: 4030641638207

Dold 0063820 UG6913.08 8E input module

Dold 0063820 UG6913.08 8E input module

Lieske Part No. 1000972
Mfg Part No 0063820
EAN-Code 4030641638207
Manufacturer Dold
Here only 432,93 EUR
515,19 EUR incl. VAT

Further information for Dold 0063820 UG6913.08 8E input module

Technical data
Cat. / PL acc. to EN ISO 13849-14/e
SIL CL acc. to IEC/EN 620613
SIL acc. to IEC/EN 620613
Safety inputs8
Test outputs for sensor monitoring4
Width22,5 mm
TypeUG 6913.08
Variant
Contact equipping8 inputs
Approvals and MarkingsUL-listed C/US, TÜV
Variant8 inputs
The Dold UG6913.08 8E is a safe input module for the modular safety system SAFEMASTER PRO. It is designed for monitoring up to eight safety inputs in industrial plants and machines. The module is intended for use in safety-critical applications and complies with the requirements of standards EN ISO 13849-1 (Category 4, Performance Level e) and IEC/EN 62061 (SIL 3). It enables decentralized signal acquisition from various safety sensors, such as optoelectronic scanners, light grids, magnetically actuated sensors, emergency stop buttons, safety mats, mechanical switches, or two-hand controls. The integrated sensor monitoring is supported by four test outputs, which are used to check sensor functions.

Applications
This module is designed for use in industrial safety systems, particularly in machine building, manufacturing technology, and plant engineering, where reliable and configurable safety monitoring is required. It is suitable for installations requiring a high number of safety inputs and can be flexibly integrated into existing SAFEMASTER PRO systems. The modular design allows scalable expansion of safety functions without extensive wiring work.

Functions and Equipment in Detail
The UG6913.08 8E features eight safe, single-channel inputs that can be paired. The inputs are designed for connection to various safety sensors and support monitoring of mechanical and electronic switches. The four test outputs enable continuous checking of connected sensors to detect faults or failures early. Configuration is performed via a graphical software (SAFEMASTER PRO Designer) using a Mini-USB connection to a PC, simplifying project planning and commissioning.

Technology Explained Simply
The module operates within the SAFEMASTER PRO system, which communicates via a 5-pole rail bus (IN-Rail Bus). Communication takes place at the rear via the rail, resulting in reduced wiring and space saving in the enclosure. The module width is 22.5 mm, enabling compact mounting on standard DIN rails. The integrated safety logic checks the function of the inputs and ensures only valid signals are processed. The coded connection blocks ensure an unambiguous connection, increasing installation safety.

Compatibility and Accessories
The module is part of the SAFEMASTER PRO system and can be combined with the control unit UG 6911 and other expansion modules such as input, output, or diagnostic modules. It is designed for use with other modules in the UG 691x series, particularly with output modules such as UG 6912.14 or UG 6912.28, which extend OSSD outputs with potential-free relay contacts. Communication occurs via the IN-Rail Bus, ensuring secure connections between modules.

Mounting and Installation
Mounting is done on a standard DIN rail. The module is simply snapped onto the rail, ensuring quick and secure installation. The connection blocks are plug-in, simplifying module replacement during maintenance or in case of failure. Configuration is done via a Mini-USB connection to a PC using the SAFEMASTER PRO Designer software, allowing individual adjustment of settings.

Operational Advantages
The module offers flexible and reliable safety monitoring with reduced wiring. The modular design enables easy system expansion, and the integrated diagnostic function supports fault localization. The coded connection blocks increase installation safety and prevent incorrect connections. Configuration via drag & drop in the software accelerates commissioning and reduces error susceptibility during project planning. The UL-listed C/US and TÜV certifications confirm safety compliance for use in North America and Europe.

Safety Inputs
The eight safety inputs are designed for connection to various safety sensors and support monitoring of mechanical and electronic switches. The inputs are single-channel and can be paired, enabling flexible configuration. The test outputs for sensor monitoring ensure continuous testing of connected sensors to detect faults early.

Certifications and Markings
The module is UL-listed C/US and carries the TÜV mark, confirming compliance with safety requirements in the USA, Canada, and Europe. The certifications confirm suitability for use in safety-critical applications.

System Integration
The module integrates into the SAFEMASTER PRO system, which consists of a control unit and up to 14 expansion modules. Communication occurs via the IN-Rail Bus, enabling a decentralized and flexible system architecture. The control unit UG 6911 can also be used as a stand-alone device, allowing flexible system design.

Diagnostics and Maintenance
The integrated diagnostic function supports fault localization and enables quick identification of malfunctions. Status LEDs provide visual feedback on the module’s operating state. Configuration via Mini-USB and graphical software simplifies maintenance and adjustment of system settings.

Communication Technology
Communication between modules occurs via a 5-pole rail bus (IN-Rail Bus), mounted at the rear of the rail. This enables a compact and reliable connection between modules without additional cable connections.

Design and Mounting
The module has a width of 22.5 mm and is designed for mounting on standard DIN rails. The compact design saves space in the enclosure. The plug-in connection blocks facilitate module replacement and maintenance.

Configuration
Configuration is performed via a Mini-USB connection to a PC using the SAFEMASTER PRO Designer software. The graphical user interface enables easy project planning via drag & drop. Settings can be individually adjusted to meet the requirements of the specific application.

Safety Logic
The integrated safety logic checks the function of the inputs and ensures only valid signals are processed. The logic checks are securely integrated to prevent malfunctions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1000972
qrcode für Dold 0063820 UG6913.08 8E input module