Dold 0063819, EAN: 4030641638191

Dold 0063819 UG6916.10 8E 2 two-channel output input module

Dold 0063819 UG6916.10 8E 2 two-channel output input module

Lieske Part No. 1000942
Mfg Part No 0063819
EAN-Code 4030641638191
Manufacturer Dold
Here only 544,41 EUR
647,85 EUR incl. VAT

Further information for Dold 0063819 UG6916.10 8E 2 two-channel output input module

Technical data
2-channel safety outputs OSSD2
Cat. / PL acc. to EN ISO 13849-14/e
SIL CL acc. to IEC/EN 620613
SIL acc. to IEC/EN 620613
Safety inputs8
Test outputs for sensor monitoring4
Width22,5 mm
TypeUG 6916.10
Variant
Contact equipping8 inputs, 2 dual-channel outputs (OSSD)
Approvals and MarkingsUL-listed C/US, TÜV
Variant8 inputs. 2 dual-channel outputs (OSSD)
The Dold UG6916.10 8E 2 zweikanalige Ausg. is a modular input/output module for the SAFEMASTER PRO safety system. It is designed for the safe monitoring of sensors and switches in industrial plants and enables the integration of up to eight safe inputs as well as two two-channel, safe outputs in OSSD format. The module is designed for use in safety applications up to Category 4 and Performance Level e according to EN ISO 13849-1, as well as SIL 3 according to IEC/EN 62061. The module width is 22.5 mm, allowing compact mounting on a support rail. Communication within the system takes place via a 5-pole support rail bus (IN-Rail Bus), ensuring a secure connection between the control unit and expansion modules.

Applications
This module is suitable for monitoring various safety devices, including optoelectronic sensors, light grids, magnetically actuated sensors, emergency stop buttons, safety mats, mechanical switches, and two-hand control systems. It can be used in machines and plants where safe control and monitoring of movements, speeds, or switching operations are required. The modular design allows for flexible adaptation to different requirements and plant complexities.

Functions and Equipment in Detail
The module features eight safe inputs, which can be paired to increase signal transmission reliability. The two two-channel outputs in OSSD format (Output Signal Switching Device) enable safe control of actuators, for example, to shut down drives or activate emergency stop functions. Additionally, four test outputs for sensor monitoring are integrated, allowing continuous testing of connected sensors. This supports early fault detection and improves operational safety.

Technology Explained Simply
The safety functions of the module are based on redundant signal paths, preventing incorrect control. The OSSD outputs operate with a two-channel, safe switching behavior, increasing control reliability. Configuration is performed via graphical software (SAFEMASTER PRO Designer) using a Mini-USB connection to a PC, enabling complex safety logic to be created without extensive wiring. The integrated logic check ensures that safety functions are executed correctly. Communication between modules occurs via the IN-Rail Bus, ensuring reliable data transmission within the system.

Compatibility and Accessories
The module is part of the SAFEMASTER PRO system and can be combined with the control unit UG 6911.10 and other expansion modules. It is compatible with various input and output modules, including relay output modules such as UG 6912.14 and UG 6912.28, which extend the OSSD outputs with potential-free contacts. Connection is made via the support rail bus, with total current load to be considered.

Mounting and Installation
Mounting is done on a standard support rail (DIN rail) using a snap-in mechanism. The connection blocks are coded to prevent incorrect connections. Configuration is performed via a Mini-USB connection to a PC, with the graphical software simplifying the project design. Installation is time-saving and reduces wiring in the enclosure.

Operational Advantages
The modular design and software configurability accelerate commissioning and reduce error susceptibility due to incorrect wiring. The integrated test outputs enable continuous monitoring of sensors, increasing operational safety. The compact design with a width of 22.5 mm optimizes space requirements in the enclosure. The certifications UL-listed C/US and TÜV confirm suitability for use in industrial environments in Germany and the USA/Canada.

The module is designed for use in safety-critical applications where high reliability and fault-free operation are required. The integrated safety functions and modular expandability make it a flexible component in modern safety concepts.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1000942
qrcode für Dold 0063819 UG6916.10 8E 2 two-channel output input module