Dold 0063754, EAN: 4030641637545

Dold 0063754 BH5902.22/01MF2/61 DC24V light grid module

Dold 0063754 BH5902.22/01MF2/61 DC24V light grid module

Lieske Part No. 1001844
Mfg Part No 0063754
EAN-Code 4030641637545
Manufacturer Dold
Here only 748,69 EUR
890,94 EUR incl. VAT

Further information for Dold 0063754 BH5902.22/01MF2/61 DC24V light grid module

Technical data
1- / 2-channel1, 2
ApprovalsTÜV, UL
Cat. / PL acc. to EN ISO 13849-14/e
Output contacts max.3 NO contacts
SIL CL acc. to IEC/EN 620613
SIL acc. to IEC/EN 620613
Thermal current Ith max.5 A
Width45 mm
TypeBH 5902
Cross fault detectionYes
Variant
Contact equipping2 NO contacts, 1 NC contact
Nominal voltageDC 24 V
Approvals and MarkingsUL-listed C/US, CSA C/US, TÜV, UKCA
The Dold BH5902.22/01MF2/61 DC24V is a light curtain module of the SAFEMASTER series, specifically designed for use in safety-critical applications. It serves the protective function for personnel and machinery, for example, in conveyor belts, presses, or other moving machine parts. The device enables flexible control of non-contact protective devices (BWS) and supports various operating modes, including protective operation, protective operation with muting, and cycle operation. The operating mode is switched via an integrated rotary switch, making the module a multifunction device suitable for different application scenarios.

Applications

The device is intended for use in industrial environments where high safety integrity is required. It is particularly suitable for installations where safe shutdown is necessary upon intrusion into the protected area. Examples include light curtains that prevent access to hazardous machine parts, or conveyor belts where temporary interruption of the protective function (muting) is enabled to allow material to pass. It can also be used in press installations where cycle operations need to be controlled. The support for up to three BWS (non-contact protective devices) in 2-channel configuration or combinations of BWS and muting sensors expands the range of applications.

Functions and Equipment in Detail

The module features a contact configuration consisting of two closers and one opener, with a maximum of three closers connectable. Additionally, two semiconductor-based outputs are available, designed to be short-circuit-proof and overload-protected. The functions include cross-short detection, which recognizes and signals a malfunction caused by a cross-short between channels. A wire break detection for the BWS connection ensures that a broken conductor is detected and the safety function responds accordingly. The response times are up to 30 ms, ensuring rapid shutdown in hazardous situations. The operating modes are adjustable via a rotary switch, with the number of cycles (1, 2, or 3) being selectable for cycle operation, for example, via a key switch.

Technology Explained Simply

The device operates at a nominal voltage of DC 24 V and is designed for use in industrial control systems. The safety functions are certified according to international standards: it complies with Performance Level (PL) e and Category 4 as per EN ISO 13849-1, indicating high safety performance for critical applications. Additionally, it meets the requirements for Safety Integrity Level (SIL 3) according to IEC/EN 62061 and IEC/EN 61508, ensuring reliability in the event of faults or disturbances. The thermal current rating (Ith) is up to 5 A, defining the maximum load for the contacts. The width of 45 mm allows for compact mounting in standard control panels. Integrated LED indicators signal the operating status (RUN mode) as well as the status of channels 1 and 2.

Compatibility and Accessories

The module is suitable for connection to BWS Type 4 or tested BWS Type 2 according to IEC/EN 61496-1. Cross-short detection in the BWS supports the safety function. It can operate with up to three 2-channel BWS or combinations of BWS and muting sensors (1-channel). The muting function allows temporary interruption of the protective function, for example, when material passes through on a conveyor belt. Adjustment of the maximum muting time and signal sequences of muting sensors is possible. A start button can be used for override function to temporarily bypass operation.

Mounting and Installation

The device is designed for mounting in standard control panels and is installed in the control cabinet using its 45 mm width. Connections are made via the designated terminals. The certifications TÜV, UL-listed C/US, CSA C/US, UKCA confirm compliance with respective safety and quality requirements in Europe and North America. Undervoltage and overvoltage detection signals voltage failures or overloads to prevent damage to the installation.

Advantages in Operation

The combination of multiple operating modes, high safety integrity, and flexible connection options for various sensors makes the module a versatile component in safety-critical control systems. Integrated diagnostic functions such as wire break detection and cross-short detection increase reliability. LED indicators simplify maintenance and troubleshooting. Operating modes are easily switchable via the rotary switch, enabling adaptation to different requirements. Certifications according to international standards ensure suitability for use in various markets.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001844
qrcode für Dold 0063754 BH5902.22/01MF2/61 DC24V light grid module