Further information for Dold 0063713 semiconductor contactor AC24-115V AC25A
Technical data
Analog Input Control
4 - 20 mA
Approvals
UL
Load current up to
50 A
Load voltage up to
AC 480 V
Number of poles
1-pole
Width
22,5 mm, 45 mm, 90 mm
Type
BF 9250/0_2
Temperature monitoring
Variant
Auxiliary voltage
AC/DC 24 V
Contact equipping
without signal contact
Control input
DC 0 - 10 V
Load current
AC 25 A
Load voltage
AC 24 - 115 V
Semiconductor output
1-pole
Approvals and Markings
UL-listed C/US
Variant
Output control with fixed period of 64 cycles
The Dold semiconductor contactor BF9250.91/002 UH=AC/DC24V DC0-10V is an industrial power semiconductor for the analog control of heating elements. It is used for precise temperature control in systems where fast, noiseless, and reliable switching function is required. The device is designed as a 1-pole semiconductor output and operates on the principle of pulse packet control, with pulses distributed linearly over 64 cycles. Control is achieved via an analog input, which can be operated optionally with DC 0–10 V, DC 4–20 mA, or a potentiometer in the range of 0–10 kΩ. Inverted analog inputs are also possible, increasing flexibility when integrating into existing control systems.
Applications
This device is specifically designed for use in industrial heating systems where precise temperature control is required. It is suitable for applications such as drying systems, oven controls, heat treatment processes, and other processes requiring continuous and precise power regulation of heating elements. The zero-voltage switching function minimizes switching disturbances and ensures quiet operation, especially with resistive loads.
Functions and Equipment in Detail
The control input allows analog actuation with a resolution of 1.5625 %, enabling fine regulation of load power. The load voltage is AC 24–115 V, with a maximum load voltage up to AC 480 V. The rated current is AC 25 A, with the device designed for load currents up to AC 50 A. The auxiliary voltage is supplied with AC/DC 24 V, with power consumption below 26 mA at DC 24 V. The output power can be varied between 0 and 100 %, with power consumption determined by the load.
Technology Explained Simply
The pulse packet control operates with a fixed cycle time of 64 cycles, with pulses distributed linearly. This enables uniform and precise power regulation. The zero-voltage switching function ensures that the switch only operates at the zero crossing of the mains voltage, minimizing network disturbances. The integrated varistor protection circuit protects the device against overvoltage. A temperature protection for the power semiconductor prevents overheating and shuts off the device at critical temperatures.
Compatibility and Accessories
The device is compliant with IEC/EN 60947-4-2 and IEC/EN 60947-4-3 standards and carries the UL certification C/US. It is designed for use in industrial environments and can be mounted on a DIN rail. The width is 45 mm, designed for the rated current class AC 25 A. Variants are available for other current classes (10 A: 22.5 mm, 50 A: 90 mm). The LED indicators signal operating status (green LED for auxiliary voltage, yellow LED for output status) as well as fault conditions such as synchronization errors, control input errors, or overheating of the power semiconductor. The overheating alarm is latching, requiring a reset by briefly switching off the supply voltage.
Mounting and Installation
The device is designed for mounting on a DIN rail and can thus be integrated into standard control panels. Recommended clearances to the surrounding environment are 20 mm above and below, and 10 mm to the left and right, to ensure sufficient cooling. The connection terminals are clearly labeled (A1(+), A2, X1, L1/N, T1/N) and allow for safe and quick wiring. The operating temperature range is between 0 and 40 °C, with a maximum temperature of 60 °C, at which current derating is required.
Advantages in Operation
The analog control enables precise and responsive regulation of heating power. The zero-voltage switching reduces electrical disturbances and ensures quiet operation. Integrated protection functions (overcurrent protection, reverse polarity protection, temperature protection) increase operational safety. The LED indicators provide quick visual diagnosis of operating and fault conditions. DIN rail mounting simplifies integration into existing control systems. The UL C/US certification enables use in North American markets.