| Technical data |
| Load current up to | 125 A |
| Load voltage up to | AC 600 V |
| Number of poles | 1-pole |
| On/Off Input Control | AC/DC, DC |
| Width | 45 mm |
| Type | PH 9260 |
| Variant |
| Control voltage | AC/DC 18 - 36 V |
| Load current | AC 25 A |
| Load voltage | AC 24 - 240 V |
| Semiconductor output | 1-pole |
| Variant | Switching at zero crossing. With heat sink |
The Dold semiconductor contactor PH9260.91/000/01 is an
AC semiconductor relay with a single-pole semiconductor output, designed for use in industrial applications. It is used for wear-free and noiseless switching of loads such as heaters, motors, valves, and lighting systems. The device is compliant with
IEC/EN 60947-4-3 and features a
zero-voltage switching function, whereby the output is activated at the next zero crossing of the sinusoidal supply voltage. After switching off the control voltage, deactivation also occurs at the next zero crossing of the load current, ensuring reduced electromagnetic interference and improved electromagnetic compatibility (EMC). Control is via an
AC/DC control voltage of 18 to 36 V, while the load voltage ranges from
AC 24 to 240 V. The rated load current is
AC 25 A, with the device designed for load currents up to
125 A (AC-51), and a limiting load integral (I²t) of up to
18000 A²s. The maximum insulation voltage is
4000 V, and the peak blocking voltage is
1200 V or
1600 V, depending on the variant.
Applications
This semiconductor relay is suitable for use in machine building and automation technology, particularly in the plastics and rubber industry, injection moulding machines, packaging machines, soldering systems, and in the food industry. The zero-voltage switching function ensures gentle load control and minimizes electrical disturbances in the network. The version with a heatsink is especially suitable for applications with higher thermal loads, as it ensures optimal heat dissipation.
Functions and Features in Detail
The device consists of two
anti-parallel connected thyristors, providing bidirectional current conduction. The
DCB technology (Direct-Copper-Bonding) ensures excellent heat transfer, thereby increasing the device’s service life. The
box terminals allow for secure and easy connection of cables. An
LED status indicator signals the state of the control input, simplifying diagnostics during operation. The width is
45 mm, enabling compact mounting on a DIN rail.
Technology Explained Simply
Zero-voltage switching means that the relay does not switch at any arbitrary point in the voltage cycle, but precisely at the zero crossing of the alternating voltage. This avoids spark formation and reduces electromagnetic interference. The use of thyristors enables contactless switching, eliminating wear and noise. DCB technology improves heat dissipation by directly bonding copper to the semiconductor chip layer, increasing thermal conductivity. Insulation values of 4000 V and peak blocking voltages of 1200 V or 1600 V ensure high electrical safety.
Compatibility and Accessories
The device is designed for use in industrial control systems and can be combined with other components of the PH 9260 series. Optionally, an
over-temperature protection device is available, where a temperature limit switch (normally open) can be inserted into a designated pocket at the bottom. If the heatsink temperature exceeds the set limit (e.g., 100 °C), the switch opens and protects the device from thermal overload. An example of a suitable temperature limit switch is the type
UCHIYA UP62 – 100.
Mounting and Installation
The semiconductor contactor is designed for mounting on a DIN rail. The integrated heatsink allows for simple and secure installation. The terminals are intended for direct connection to cables. The operating temperature range is
-20 °C to 40 °C, and the storage temperature range is
-20 °C to 80 °C. The protection rating of the terminals is
IP20, providing shock protection.
Advantages in Operation
Contactless switching via thyristors eliminates wear, increasing service life. Zero-voltage switching reduces network disturbances and enables gentle load control. DCB technology ensures efficient cooling, enhancing reliability under load. The LED indicator simplifies maintenance and diagnostics. The compact design with a width of 45 mm allows for dense mounting in enclosures.