Dold 0063133, EAN: 4030641631338

Dold 0063133 BH5932.22/012/61 speed monitor AC/DC24V

Industrial Material > Industrial relays and contactors > Switching units / measuring, control relay

Dold 0063133 BH5932.22/012/61 speed monitor AC/DC24V

Lieske Part No. 1321053
Mfg Part No 0063133
EAN-Code 4030641631338
Manufacturer Dold
Here only 511,59 EUR
608,79 EUR incl. VAT

Further information for Dold 0063133 BH5932.22/012/61 speed monitor AC/DC24V

Technical data
1- / 2-channel2
ApprovalsUL
Cat. / PL acc. to EN ISO 13849-13/e
ClassificationFor initiators
Forcibly guided output contacts max.1 NC contact, 2 NO contacts
SIL CL acc. to IEC/EN 620613
SIL acc. to IEC/EN 620613
Thermal current Ith max.4 A
Width45 mm
TypeBH 5932
Variant
Contact equipping2 NO contacts, 1 NC contact
Nominal voltageAC/DC 24 V
Response value20 - 26000 IPM
Approvals and MarkingsUL-listed C/US, TÜV, CCC
VariantWithout sensor detection. PNP-input. Adjustable setting value channel 1 and 2 separated adjustable
The Dold speed monitor BH5932.22/012/61 AC/DC24V is a safety-relevant monitoring switch for industrial applications. It is used for monitoring rotational and linear movements in machines and systems, where moving parts may pose a hazard to personnel and equipment. The device is designed as a 2-channel speed monitor and allows independent setting of the trigger value for each channel. The operating voltage is AC/DC 24 V, making it suitable for use in standard industrial power supplies.

Applications

The BH5932 is specifically designed for use in safety-critical systems where continuous monitoring of speed or movement of drives is required. Typical applications include machines with rotating parts, such as presses, milling machines, or conveyor systems, where a stoppage or unauthorized movement must be prevented. The device class is designed for initiators, i.e., for use with proximity switches that detect movement.

Functions and equipment in detail

The device features two inputs for pnp proximity switches, and is delivered in the variant without initiator connection detection. The trigger value is adjustable and ranges from 20 to 26000 IPM (impulses per minute), allowing flexible adaptation to different drive speeds. The output contacts are fail-safe, consisting of two NO contacts and one NC contact, which increases safety in the event of a fault. The contacts are rated for a thermal current of up to 4 A.

Technology explained simply

The fail-safe contact design means that all contacts are mechanically linked, so that a failure of one contact automatically brings all other contacts into the same state. This prevents a single defective contact from triggering an incorrect safety function. The inputs are designed for pnp proximity switches, enabling direct connection to inductive sensors. The switching frequency of the compatible sensors can reach up to 5000 Hz, suitable for fast movements. The IP67 protection rating makes the device dust- and waterproof, allowing use even outdoors or in humid environments.

Compatibility and accessories

The BH5932 is compatible with Dold Minitiator proximity switches NA 5001, NA 5002, NA 5005, and NA 5010. In particular, types NA 5002.01.34 and NA 5005.01.34 are intended for devices without initiator connection detection. The connection table in the datasheet shows the correct wiring of the sensors to inputs In A and In B. The sensors feature an LED indicator for switching status and are rated for an ambient temperature range of -25 to +70 °C.

Mounting and installation

The device has a width of 45 mm and is suitable for mounting in standard control panels. The terminal connections are designed for stranded wires with 2 x 1.5 mm² with ferrule and plastic sleeve DIN 46 228-1/-2/-3/-4 or 2 x 2.5 mm² with ferrule DIN 46 228-1/-2/-3. The terminal clamps ensure a secure and reliable connection. Mounting is typically done in enclosures or on mounting plates, with electrical connections to be made according to the connection tables in the datasheet.

Advantages in operation

The BH5932 offers high safety integrity with Category 3 and Performance Level e according to EN ISO 13849-1, as well as SIL 3 according to IEC/EN 62061. The independent setting of trigger values for both channels allows precise adaptation to different drives. The fail-safe contact design and certifications UL-listed C/US, TÜV, and CCC ensure high reliability and worldwide usability in safety-critical systems. The IP67 protection rating extends the range of applications to harsh environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1321053
qrcode für Dold 0063133 BH5932.22/012/61 speed monitor AC/DC24V