Dold 0062760, EAN: 4030641627607

Dold 0062760 BA9034N 32A AC50/60Hz 400V 2-11S motor brake device

Dold 0062760 BA9034N 32A AC50/60Hz 400V 2-11S motor brake device

Lieske Part No. 1001858
Mfg Part No 0062760
EAN-Code 4030641627607
Manufacturer Dold
Here only 323,73 EUR
385,24 EUR incl. VAT

Further information for Dold 0062760 BA9034N 32A AC50/60Hz 400V 2-11S motor brake device

Technical data
Braking current adjustable up to max.32 A
Braking time adjustable up to max.31 s
Width45 mm
TypeBA 9034N
Automatic standstill monitoringYes
Signalling outputYes
Variant
Braking current32 A
Braking time2 - 11 s
Contact equipping1 changeover contact
Nominal voltageAC 400 V
Approvals and MarkingsUKCA
VariantWith standstill detection. Adjustable braking current
The Dold motor brake device BA9034N is an electronic device for controlled braking of single- and three-phase asynchronous motors. It is used in industrial applications where safe and precise stopping of the motor is required, for example in sawmills, centrifuges, woodworking machines, textile machines or conveyor systems. The device operates on the principle of direct current braking with single-phase rectification and is designed for a rated voltage of AC 400 V. It features an integrated brake contactor function and is mountable on a 35 mm standard DIN rail. The width is 45 mm, enabling compact installation in enclosures.

Applications

The BA9034N is designed for use in industrial plants where fast and reliable braking is required. It is particularly suitable for machines where uncontrolled coast-down time would be dangerous or reduce productivity. The automatic standstill detection ensures that the motor safely comes to a stop before the braking function is switched off. Applications include sawmills, centrifuges, woodworking machines, textile machines and conveyor systems.

Functions and Equipment in Detail

The device is connected to the supply voltage via terminals L1–L2. An integrated interlock contact (X5–X6) closes as soon as voltage is applied, enabling control of the motor contactor. A green LED indicates that the device is operational. The motor is started via an external ON pushbutton. The braking DC voltage is supplied via terminals T1 and T2 and flows through the stator winding of the motor once the brake contactor is activated. The braking time is adjustable and can range from 2 to 11 seconds, with a maximum braking time of 31 seconds. The braking current is also adjustable and can reach up to 32 Aeff. Adjustment is possible without a current meter, simplifying commissioning.

Technology Explained Simply

The BA9034N is controlled by a microcontroller that precisely monitors and controls the braking process. Upon de-energizing the motor contactor, the brake contactor is switched on after a safety delay, allowing the braking current to flow through the stator winding. The braking delay time is self-optimizing (0.2 to 2 seconds) to dissipate residual EMF. The automatic standstill detection monitors the motor status and switches off the braking function as soon as the motor has stopped. The electronic power consumption is 5 VA. The electrical service life is 100,000 switching operations, and the mechanical service life is 50 million switching operations.

Compatibility and Accessories

The device is suitable for all single- and three-phase asynchronous motors. It complies with the standard IEC/EN 60947-4-2 and is designed for use in industrial plants. UKCA certification is available. It is designed for an operating temperature of 0 °C to +45 °C and can be operated up to an altitude of 2000 m above sea level. The relative humidity must not exceed 93 % at 40 °C. The overvoltage category is III. The devices are designed for continuous duty operation.

Mounting and Installation

The BA9034N is mounted on a 35 mm standard DIN rail. The connection terminals are clearly labeled (L1–L2, T1–T2, X3–X4, X5–X6), simplifying installation. The green LED “RUN” indicates the operating status, while the red LED “Error” signals fault conditions such as supply frequency outside tolerance, braking current not reached, overheating of the power section, missing synchronization signal, defective temperature measurement circuit, or faulty motor supply disconnection. The yellow LED “I B” indicates whether braking current is flowing (steady light for up to 11 s, flashing for up to 31 s).

Advantages in Operation

The device offers higher safety and cost-efficiency through shorter coast-down times. It is wear-free and maintenance-free, reducing operating costs. Simple commissioning without a current meter reduces installation effort. The integrated brake contactor function and automatic standstill detection increase reliability. The compact design and DIN rail mounting enable flexible integration into existing systems. Assignment type 1 (according to IEC/EN 60947-4-1) means that the device is defective after a short circuit and must be replaced. The maximum short-circuit withstand capability is 1200 A/2 s (type gR). The line protection fuse should be 20 A gG/gL.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001858
qrcode für Dold 0062760 BA9034N 32A AC50/60Hz 400V 2-11S motor brake device