Dold 0062433, EAN: 4030641624330

Dold 0062433 semiconductor relay AC24-240V AC45A

Dold 0062433 semiconductor relay AC24-240V AC45A

Lieske Part No. 1001325
Mfg Part No 0062433
EAN-Code 4030641624330
Manufacturer Dold
Here only 177,13 EUR
210,78 EUR incl. VAT

Further information for Dold 0062433 semiconductor relay AC24-240V AC45A

Technical data
Load current up to45 A
Load voltage up toAC 480 V
Number of poles1-pole
On/Off Input ControlDC
Width45 mm
TypePH 9270/003
Signalling outputYes
Variant
Analogue outputDC 0 - 10 V
Auxiliary voltageDC 24 V
Load currentAC 45 A
Load voltageAC 24 - 240 V
Semiconductor output1-pole
VariantSwitching at zero crossing. With analogue output. Without heat sink
The semiconductor relay PH9270.91/003 from Dold is an AC semiconductor relay with integrated load current measurement, designed for industrial applications with high requirements for reliability and monitoring functions. It features an analog output in the range DC 0–10 V, which continuously detects the load current and converts it into a proportional signal. Control is performed via DC actuation, with the auxiliary voltage being DC 24 V. The device is designed as a zero-voltage switch, meaning it activates at the next zero crossing of the sinusoidal supply voltage and deactivates at the next zero crossing of the load current. This switching method ensures excellent EMC properties and minimizes disturbances in the network. The width is 45 mm, enabling compact mounting on the DIN rail. The load voltage is in the range AC 24–240 V, with the maximum rated voltage reaching up to AC 480 V. The load current is up to 45 A, according to switching category AC-51. Measurement is performed as true RMS value, enabling precise detection of alternating currents. An integrated alarm output indicates the operating status, with the LED indicator at the control input (A1/A2) glowing yellow when the relay is actuated and off when not activated.

Applications
This semiconductor relay is particularly suitable for heating processes where early fault detection is required. It is frequently used in the plastics and rubber industry for injection molding machines, in the packaging industry for thermoforming and packaging machines, and in the food industry. Continuous monitoring of the load current enables precise control and diagnosis of processes. The noiseless and wear-free switching function ensures high service life and easy maintenance.

Functions and Equipment in Detail
The device features an analog output DC 0–10 V, which reproduces the load current signal proportionally. This signal can be directly evaluated by a PLC or an analog input display module. The integrated load current measurement enables continuous monitoring, allowing deviations or failures to be detected early. The DCB technology (Direct-Copper-Bonding process) ensures optimal heat dissipation, reducing thermal stress and increasing operational safety. The width of 45 mm allows for compact installation in enclosures. The version without a heatsink is standard; optionally, a version with a heatsink for DIN rail mounting is available, achieving optimal heat transfer.

Technology Explained Simply
The semiconductor relay operates with two antiparallel-connected thyristors functioning as a zero-voltage switch. When the control voltage is applied, the output activates at the next zero crossing of the supply voltage. After removing the control voltage, the relay deactivates at the next zero crossing of the load current. This prevents switching arcs and minimizes electromagnetic interference. Load current measurement is performed as true RMS value, meaning even non-sinusoidal currents are correctly detected. The analog output provides a continuous signal usable for process control or diagnostics. The LED indicator at the control input visually indicates the operating status.

Compatibility and Accessories
The semiconductor relay is compliant with IEC/EN 60947-4-3. It is designed for load voltages of AC 24–240 V, with the maximum rated voltage reaching up to AC 480 V. The load current capacity is 45 A, according to switching category AC-51. The frequency range is between 47 and 63 Hz. Optionally, the device is available with a heatsink that can be snapped onto the DIN rail. For thermal protection, a temperature limit switch (normally open) can be inserted into the designated slot on the device; for example, a temperature limit switch of type UCHIYA UP62–100 is suitable. This opens when the heatsink temperature exceeds 100 °C.

Mounting and Installation
Mounting is done on the DIN rail, with the width of 45 mm enabling compact placement. Installation must be performed by a qualified electrician. The connection terminals are clearly labeled: A1+/A2 for the control input, A3+/A2 for the operating voltage and load current measurement, Out for the analog output, L1 for the supply connection, and T1 for the load output. The LED indicator at the control input indicates the operating status. Heat dissipation is supported by DCB technology; in the version with heatsink, heat transfer is additionally optimized.

Advantages in Operation
The semiconductor relay offers wear-free, noiseless, and economical operation. The integrated load current measurement enables higher productivity through early fault detection. Precise measurement of alternating currents up to 45 A and the analog output for further processing in PLC or display systems increase flexibility. The zero-voltage switching ensures excellent EMC properties. DCB technology ensures efficient heat dissipation, increasing operational safety. The compact design with a width of 45 mm simplifies installation in existing enclosures.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001325
qrcode für Dold 0062433 semiconductor relay AC24-240V AC45A