| Technical data |
| 1- / 2-channel | 2 |
| Approvals | UL |
| Cat. / PL acc. to EN ISO 13849-1 | 3/e |
| Classification | For initiators |
| Forcibly guided output contacts max. | 1 NC contact, 2 NO contacts |
| SIL CL acc. to IEC/EN 62061 | 3 |
| SIL acc. to IEC/EN 62061 | 3 |
| Thermal current Ith max. | 4 A |
| Width | 45 mm |
| Type | BH 5932 |
| Variant |
| Contact equipping | 2 NO contacts, 1 NC contact |
| Nominal voltage | AC/DC 24 V |
| Response value | 300 IPM |
| Approvals and Markings | UL-listed C/US, TÜV, CCC |
| Variant | Without sensor detection. PNP-input. Fixed setting value |
The Dold speed monitor BH5932.22/010/61 AC/DC24V 300IPM is a safety-relevant monitoring switch for speed and standstill monitoring in industrial drive systems. It is used to detect machine movements, particularly in drives where unexpected or faulty movement may pose a hazard to personnel or equipment. The device is designed for use in machines and plants where safe and reliable monitoring of motion states is required.
Applications
This speed monitor is primarily intended for monitoring rotational and linear movements. It is used in drive systems where safe shutdown or alarm triggering is necessary upon reaching or falling below a defined speed condition. Typical application areas include machines with rotating parts, such as presses, conveyor systems, machine tools, or packaging machines, where uncontrolled movement must be prevented.
Functions and Equipment in Detail
The device features a fixed trigger value of 300 IPM (impulses per minute), used for speed monitoring. The contact configuration includes two closers and one opener, enabling flexible integration into safety circuits. The output contacts are mechanically interlocked, meaning they are physically connected to prevent malfunction due to electrical or mechanical disturbances. This is critical for the device’s safety function.
Technology Explained Simply
The speed monitor operates with a PNP input, designed for connection to inductive proximity switches (initiators). The nominal voltage is AC/DC 24 V, enabling universal use in industrial control systems. The thermal current rating is up to 4 A, defining the contact load capacity for connected loads. The width of 45 mm allows mounting in standard control panels according to DIN.
Compatibility and Accessories
The device is designed for use with inductive proximity switches of types NA 5001, NA 5002, NA 5005, and NA 5010. These initiators are available with switching distances from 1.5 mm to 10 mm and operate within a voltage range of 10 to 30 V. The initiator connection cables are 2 m long. The connection configuration depends on the initiator type and device variant; for variants without initiator connection detection, initiators NA 5002.01.34 and NA 5005.01.34 are suitable. Connections are made via terminals In A / In B, and output contacts are designed for connection to safety relays or control systems.
Mounting and Installation
Mounting is performed in standard control panels with a width of 45 mm. The terminal connections support stranded wires with 2 x 1.5 mm² with ferrules and plastic sleeves according to DIN 46 228-1/-2/-3/-4, or 2 x 2.5 mm² with ferrules according to DIN 46 228-1/-2/-3. The initiator cables are connected directly to input terminals In A / In B. The feedback circuits X1 – X2 enable monitoring of external contacts, supporting integration into complex safety architectures.
Advantages in Operation
The device meets safety requirements up to Category 3 and PL e according to EN ISO 13849-1, as well as SIL 3 according to IEC/EN 62061, ensuring high reliability and safety in critical applications. Certifications including UL-listed C/US, TÜV, and CCC confirm compliance with international safety standards. The mechanically interlocked contacts and fixed trigger value ensure deterministic response, which is essential for safety-critical functions. Use in combination with inductive proximity switches enables contactless and reliable detection of rotational movement.