Dold 0060946, EAN: 4030641609467

Dold 0060946 MH9143.38/600 frequency monitor 45-65Hz

Dold 0060946 MH9143.38/600 frequency monitor 45-65Hz

Lieske Part No. 1001930
Mfg Part No 0060946
EAN-Code 4030641609467
Manufacturer Dold
Here only 332,76 EUR
395,98 EUR incl. VAT

Further information for Dold 0060946 MH9143.38/600 frequency monitor 45-65Hz

Technical data
1- / 3-phase1
Enclosure designSwitch cabinet
Measuring range max.50/60 Hz
Output contacts2 x 2 C/O contacts
Standard measuring range50/60 Hz
Width45 mm
TypeMH 9143
Auxiliary voltage requiredYes
Operate delayYes
Variant
Alarm delaywithout
Auxiliary voltageAC/DC 110 - 230 V
Contact equipping2 x 1 changeover contact
Response value45 - 65 Hz
Start up delay0 - 30 s
VariantVariable tripping values. Adjustable hysteresis. Start up delay activatable via terminals
The network frequency monitor MH9143.38/600 from Dold is an industrial monitoring switch for continuous control of network frequency in 50- and 60-Hz networks. It is used for detecting over- and under-frequency conditions in local power supplies, self-generation systems, generators, and power aggregates. The device is designed for use in enclosures and offers precise frequency measurement with fast response time. The frequency measurement input is universally designed for alternating voltages in the range of AC 40 to 500 V, enabling flexible adaptation to various network conditions.

Applications

The MH9143.38/600 is used in industrial and technical installations where stable frequency supply is critical. This includes, for example, installations with self-generated power, such as diesel or gas generators, as well as local power supplies in factories, hospitals, or emergency power systems. Monitoring takes place in single-phase systems, with the device measuring frequency in the range of 45 to 65 Hz. The application is particularly useful where frequency deviations can cause damage to machinery or operational disruptions.

Functions and Equipment in Detail

The device features two independent relay outputs, each with two changeover contacts, which can be used to control warning lights, switching operations, or disconnections. The alarm thresholds for over- and under-frequency are continuously adjustable in the range of 45 to 65 Hz, allowing precise adaptation to specific operating conditions.

Technology Explained Simply

Frequency measurement is performed via a disturbance-resistant input that operates reliably even in the presence of electrical disturbances in the network. The response delay is activated, meaning that the device does not react immediately upon reaching the alarm threshold, but instead waits for a pre-set time (up to 20 seconds) to filter out short-term fluctuations. The start-up bypass can be activated via terminals and allows a delay of 0 to 30 seconds upon switching on, to avoid interfering with generator or motor start-up processes. The auxiliary voltage is AC/DC 110 to 230 V and is required for device operation.

Compatibility and Accessories

The device is designed for use in enclosures and has a width of 45 mm. It is part of the VARIMETER series from Dold and can be used in combination with other devices from this series. The output relays can be operated on the de-energized principle, where the relay drops out in alarm condition. For over-frequency, the energized principle can also be selected. The LED indicators signal the operating status of the auxiliary voltage, the input frequency, and the alarm conditions for over- and under-frequency.

Mounting and Installation

Mounting is performed in standard enclosures using screw fastening. The connection terminals are clearly labeled: A1/A2 for auxiliary voltage, E0/E1/E2 for the frequency measurement input, and terminals 11-14 and 21-24 for the relay outputs. The programming terminals X1, X2, X3 allow setting functions such as start-up bypass, alarm delay, and reset behavior. Terminal labeling is detailed in the data sheet.

Advantages in Operation

The MH9143.38/600 offers high reliability due to its disturbance-resistant measurement technology and the precise, continuously adjustable alarm thresholds. The separate relay outputs enable differentiated responses to over- and under-frequency. The integrated LED indicators facilitate visual monitoring of the operating status. The device complies with the standard IEC/EN 60255-1, ensuring compliance with safety and functional requirements for electrical equipment in measurement and monitoring technology. The combination of universal input, flexible adjustability, and robust design makes it suitable for demanding industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001930
qrcode für Dold 0060946 MH9143.38/600 frequency monitor 45-65Hz