Further information for Dold 0060785 GB9034/0101 motor brake unit 40A
Technical data
Braking current adjustable up to max.
600 A
Braking time adjustable up to max.
320 s
Width
110 mm
Type
GB 9034
Automatic standstill monitoring
External brake contactor required
Signalling output
Temperature monitoring
Variant
Auxiliary voltage
Without
Braking current
40 A
Nominal voltage
AC 400 V
Approvals and Markings
UKCA
Variant
Brake current monitoring, thermistor-motor protection input, star-delta control and output relay for standstill indication. Removable terminals
The electronic motor brake device GB 9034 of the MINISTOP series by Dold is designed for wear-free braking of three-phase and alternating current asynchronous motors. It is used in drives that must be reliably braked for safety and functional reasons. The device enables precise control of the braking process and is suitable for use in industrial installations such as sawmills, centrifuges, woodworking machines, textile machines, and conveyor systems. Braking is achieved via DC braking with single-phase rectification, where the braking current is applied to the motor's stator winding via terminals U and V. Control is performed via an external brake contactor, which is actuated via terminals 1–2. The supply voltage is connected to terminals L1–L2, with the interlock contact closing for the motor contactor. The ready LED indicates that the supply voltage is present and the device is operational.
Applications
The motor brake device is designed for drives requiring fast and reliable braking. Typical applications include machines in woodworking, the textile industry, conveyor technology, and installations where a short coast-down time is necessary for process safety or maintenance. The device variant GB9034/0101 is designed for a rated voltage of AC 400 V and provides a braking current of 40 A. The maximum adjustable braking current is 600 A, with braking time adjustable up to 320 seconds. The width is 110 mm, enabling compact mounting in enclosures.
Functions and Equipment in Detail
The device features automatic standstill monitoring, which detects motor standstill and accordingly switches off the braking current. In standstill-dependent braking, a potential-free alarm contact signals if the motor has not stopped within the maximum braking time. The braking time can be pre-selected via an adjustment control, allowing application-specific adaptation. Integrated temperature monitoring via a thermistor motor protection input enables monitoring of motor heat to prevent overheating. The control terminals are designed for plug-in connection, allowing flexible and quick installation.
Technology Explained Simply
DC braking is performed via a single-phase rectifier, which converts alternating voltage into direct voltage, which then flows through the motor's stator winding. This generates a braking torque that slows down the motor. The safety time between switching off the motor contactor and switching on the brake contactor prevents short-term induction voltages from damaging the power section. The braking time is set via a control and can be up to 320 seconds. The braking current is also adjustable and can reach up to 600 A. Standstill detection is performed via integrated sensors that detect motor standstill and automatically switch off the braking current.
Compatibility and Accessories
The device is suitable for all asynchronous motors and can be integrated into existing installations. The variant GB9034/0101 is designed without auxiliary voltage. Approvals include the UKCA mark. The device variant offers braking current monitoring, a thermistor motor protection input, star/delta control, and a standstill alarm relay. The plug-in control terminals facilitate installation. For applications with higher voltages (200–690 V), alternative variants are available, but are not part of this device variant.
Mounting and Installation
Mounting is performed in an enclosure, with the width of 110 mm enabling compact placement. Connections are made via designated terminals: L1–L2 for supply voltage, U–V for braking current, 1–2 for the external brake contactor, and 8–9 for interlocking the motor contactor. Settings for braking time and braking current are adjusted via the designated controls. LED indicators show the operating status: LED 1 indicates readiness, LED 2 shows the current setpoint, LED 3 shows the actual current value. During standstill monitoring, LEDs 2 and 3 flash continuously if braking is standstill-dependent.
Advantages in Operation
The motor brake device offers higher safety through shorter coast-down times and is wear- and maintenance-free. Easy installation, even in existing installations, reduces mounting time. Adjustable parameters allow adaptation to specific requirements. Integrated standstill monitoring and alarm output ensure reliable operational monitoring. DC braking is efficient and protects the motor's mechanical components.
Approvals and Standards
The device complies with standard IEC/EN 60947-4-2 and carries the UKCA mark. Conformity with these standards ensures safety and reliability in industrial use. The device variant is designed for use in installations with AC 400 V and offers a maximum braking current of 600 A and a maximum braking time of 320 seconds. The width of 110 mm enables compact mounting in enclosures. The plug-in control terminals facilitate installation and maintenance.
Functions in Operation
When the motor contactor is switched off, the brake contactor is activated after a safety time delay, and the braking current flows through the stator winding. The braking time is set via a control. Standstill detection automatically switches off the braking current as soon as the motor stops. In standstill-dependent braking, a potential-free alarm contact signals if the motor has not stopped within the maximum braking time. LED indicators show the operating status: LED 1 indicates readiness, LED 2 shows the current setpoint, LED 3 shows the actual current value. During standstill monitoring, LEDs 2 and 3 flash continuously if braking is standstill-dependent.
Application-Specific Features
The device variant GB9034/0101 is designed for a rated voltage of AC 400 V and provides a braking current of 40 A. The maximum adjustable braking current is 600 A, with braking time adjustable up to 320 seconds. The width is 110 mm, enabling compact mounting in enclosures. The plug-in control terminals facilitate installation. Integrated standstill monitoring and alarm output ensure reliable operational monitoring. DC braking is efficient and protects the motor's mechanical components.